Inhaltszusammenfassung zur Seite Nr. 1
ENGLISH ESPAÑOL
website http://www.lgservice.com
LG
LG
Window-Type Air Conditioner
OWNER'S MANUAL
MODELS, MODELOS:
WK Series: LW7000ER
LW8000ER
WL Series: L1004R
IMPORTANT
LW1000ER
Please read through this manual. It contains valuable
information about your air conditioner. This manual may
L1204R
help save time and money by explaining proper air
LW1200ER
conditioner maintenance and preventing improper use.
L1404R
PRECAUTIONS
LB1000ER
Pay close attention to precautions in order to prevent
LB1200E
Inhaltszusammenfassung zur Seite Nr. 2
Window-Type Air Conditioner Owner’s Manual TABLE OF CONTENTS FOR YOUR RECORDS Write the model and serial numbers here: Model # Serial # You can find them on a label on the side of each unit. Dealer's Name 1. Safety Precautions Date Purchased Staple your receipt to this page in the event you need it to prove date of purchase or for warranty issues. 2. Operating Instructions 3. Care and Maintenance READ THIS MANUAL Inside you will find many helpful hints on how to use 4. Hardware Installation an
Inhaltszusammenfassung zur Seite Nr. 3
ENGLISH Safety Precautions Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications. This symbol indicates the possibility of death or serious injury. WARNING This symbol indicates the possibility of injury or damage to properties only. CAUTION Meanings of symbols used in this manual are as sho
Inhaltszusammenfassung zur Seite Nr. 4
Operation Plug in the power plug Do not operate or stop the Do not damage or use an properly. unit by inserting or pulling unspecified power cord. out the power plug. • Otherwise, it will cause • It will cause electric shock or • It will cause electric shock or electric shock or fire due to fire due to heat generation. fire. heat generation or electric shock. ON Do not modify power cord Do not share the outlet with Always plug into a length. other appliances. grounded outlet. • It will cause e
Inhaltszusammenfassung zur Seite Nr. 5
ENGLISH Do not allow water to run Leave the door closed while Ventilate before operating into electric parts. the air conditioner is air conditioner when gas running. goes out. • It will cause failure of machine • It is not designed to cool the • It may cause explosion, fire, or electric shock. entire house. and burn. CAUTION Installation Never touch the metal parts Do not block the inlet or Ensure that the outer case of the unit when removing outlet. is not damaged by age or the filter. wear.
Inhaltszusammenfassung zur Seite Nr. 6
Do not place heavy object If water enters the product, Do not clean the air on the power cord and take turn off the the power switch conditioner with water. care so that the cord should of the main body of appliance. not be pressed. Contact service center after taking the power-plug out from the socket. • There is danger of fire or • Water may enter the unit and electric shock. degrade the insulation. It may cause an electric shock. Turn off the power and Do not put a pet or house Do not use thi
Inhaltszusammenfassung zur Seite Nr. 7
ENGLISH Safety Prior to Operation Precautions Preparing for operation 1 Contact an installation specialist for installation. 2 Plug in the power plug properly. 3 Do not share the same outlet with other appliances 4 Do not use an extension cord. 5 Do not start/stop operation by plugging/unplugging the power cord. 6 If cord/plug is damaged, replace only with an authorized part. Usage 1 Being exposed to direct airflow for an extended period of time could be hazardous to your health. Do not expose o
Inhaltszusammenfassung zur Seite Nr. 8
Operating Remote Control Operations Instructions The remote control and control panel will look like those represented in the following pictures. 6 COOL FAN DRY AIR PURIFIER Air FAN Power ENERGY Purifier SAVER 7 1 INDOOR DESIRED AIR PURIFIER Temp CLEAN FILTER 2 Fan Speed FAN AIR 4 TIMER MODE TEMP POWER SPEED PURIFIER Sleep Mode 8 3 Auto Timer Swing 5 4 3 7 2 1 5 Power ˚F Cool F1 LOW F2 MED 1 F3 HIGH Energy 6 Saver Temp Fan 2 TEMP 2 Dry Timer Fan Speed 4 Timer Mode 5 3 3 5 4 1 8
Inhaltszusammenfassung zur Seite Nr. 9
ENGLISH Remote Remote Contr Contro ol l O Operations perations 7 1 POWER AIR PURIFIER Operation starts when this button is pressed and • Press the Air Purifier button. Operation will start stops when you press the button again. when the button is pressed and stop when the button is pressed again. 2 TEMPERATURE CONTROL The thermostat monitors room temperature to • Set the fan speed again with the remote control. maintain the desired temperature. You can select the fan speed in three steps-high, T
Inhaltszusammenfassung zur Seite Nr. 10
Operating Adjusting the Air Flow Direction Instructions Vent Control For maximum cooling efficiency, CLOSE the vent. This will allow internal air circulation. OPEN theventtodischargestaleair. Part A CLOSE VENT OPEN NOTICE : Before using the ventilation feature, position the vent lever by pulling Part A out straight and snapping it into place. Adjusting the Air Flow Direction Airflow can be adjusted by changing the direction of the air conditioner's louvers. This can also increase the cooling eff
Inhaltszusammenfassung zur Seite Nr. 11
ENGLISH Care and Care and Maintenance Maintenance Turn the power off and unplug the power plug before cleaning the air conditioner. Air Filter The air filter behind the inlet grille should be checked and cleaned at least once every 2 weeks (or as necessary) to maintain optimal performance of the air conditioner. How to remove the air filter 1 The grille may be opened from the top for easy maintenance after installation. 2 Open the inlet grille by pulling off the exposed door on the top of the un
Inhaltszusammenfassung zur Seite Nr. 12
Remote Air Purifying Contr Filter ol Operations (Optional) The Air Purifying filter behind the air filter should be checked and cleaned once every 3 months or more often if necessary. 1 After removing the Air Purifying Filter, pull slightly forward to remove the Air Purifying filter. 2 Soak the Air Purifying Filter in water mixed with a mild detergent for 20~30 minutes. 3 Dry the Air Purifying Filter in the shade for a day.(The moisture must be removed completely on this part.) 4 Note the cuts o
Inhaltszusammenfassung zur Seite Nr. 13
ENGLISH Hardware Hardware Installation Installation Product Features CAUTION: This appliance should be installed in accordance with national wiring regulations. The following information serves acts as a guide to help to explain product features. 13 6 7 11 5 17 8 14 9 1 12 2 4 15 10 3 16 1. CABINET 9. CONTROL PANEL 2. FRONT GRILLE 10. POWER CORD 3. AIR FILTER 11. COMPRESSOR 4. AIR INTAKE (INLET GRILLE) 12. BASE PAN 5. AIR DISCHARGE 13. BRACE 6. VERTICAL AIR DEFLECTOR 14. CONDENSER (HORIZONTAL LO
Inhaltszusammenfassung zur Seite Nr. 14
WK Series How to Install the Unit 1 To prevent vibration and noise, make sure the unit Fence is installed securely and firmly. Awning 2 Install the unit where the sunlight does not shine Cooled air directly on the unit. Heat radiation 3 The outside of the cabinet must extend outward for at least 12" and there should be no obstacles, such as a fence or wall, within 20" from the back of the 1 cabinet because it will prevent heat radiation of the About /2" condenser. Over 20" Restriction of outsid
Inhaltszusammenfassung zur Seite Nr. 15
ENGLISH WL Series How to Install the Unit 1 To prevent vibration and noise, make sure the unit Fence is installed securely and firmly Awning 2 Install the unit where the sunlight does not shine Cooled air directly on the unit. Heat radiation 3 The outside of the cabinet must extend outward for at least 12" and there should be no obstacles, such as a fence or wall, within 20" from the back of the 1 cabinet because it will prevent heat radiation of the About /2" condenser. Over 20" Restriction of
Inhaltszusammenfassung zur Seite Nr. 16
WP Series How to Install the Unit 1 To prevent vibration and noise, make sure the unit Fence is installed securely and firmly. Awning 2 Install the unit where the sunlight does not shine Cooled air Heat directly on the unit. radiation 3 There should be no obstacles, such as a fence and wall, within 20" from the back of the cabinet because it will prevent heat radiation of the 1 About /2" condenser. Restriction of outside air will greatly reduce the Over 20" cooling efficiency of the air conditi
Inhaltszusammenfassung zur Seite Nr. 17
ENGLISH WK, WL Series Installation Kits Contents NO. NAME OF PARTS Q'TY 2 3 4 1 1 FRAME CURTAIN 2 2 SILL SUPPORT 2 3BOLT 2 4NUT 2 8 13 5 6 7 5 SCREW (TYPE A) 16 6 SCREW (TYPE B) 3 7 SCREW (TYPE C) 5 10 8FOAM-STRIP 1 12 9DRAINPIPE 1 9 11 10 FOAM-PE 1 11 FRAME GUIDE 2 12 WINDOW LOCKING BRACKET 1 13 FOAM-PE 1 Suggested Tool Requirements SCREWDRIVER(Philips and Flatead), RULER, KNIFE, HAMMER, PENCIL, LEVEL Shipping PREPARATION OF CHASSIS Screws 1 Remove the screws which fasten the cabinet at both s
Inhaltszusammenfassung zur Seite Nr. 18
Cabinet Installation 1 Open the window. Mark a line on center of the window stool. Carefully place the cabinet on the window stool and align the center mark on the bottom front with the center line marked in the window stool. Upper Guide Window stool Front Angle Fig. 1 2 Pull the bottom window sash down behind the Upper Guide until it meets. Window Sash Upper guide NOTICE : Do not pull the window sash down tightly that the movement of Frame Curtain is restricted. Foam-pe 13 Cabinet Frame Curtain
Inhaltszusammenfassung zur Seite Nr. 19
ENGLISH 6 The cabinet should be installed with a very slight tilt Screw(Type B) 6 (about 1/2") downward toward the outside (See Fig. 5). Adjust the bolt and the nut of Sill Support for balancing the cabinet. Sill Support 2 7 Attach the cabinet to the window stool by driving the screws (Type B: Length 16mm (5/8 inch) Sash track and below.) through the front angle into window stool. 8 Pull each Frame Curtain fully to each window sash track, and repeat step 2. Front Angle Screw(Type B) 6 Sill Suppo
Inhaltszusammenfassung zur Seite Nr. 20
12 Attach the Window Locking Bracket withaType Window locking C screw .(SeeFig.9) 12 bracket Fig. 9 13 Attach the front grille to the cabinet by inserting the tabsonthegrilleintothe tabsonthefrontof the cabinet. Push the grille in until it snaps into place. (See Fig. 10) Fig. 10 14 Pull down the inlet grille and secure it with a Type A screw through the front grille. (See Fig. 11) 15 Window installation of room air conditioner is now completed. See ELECTRICAL DATA for attaching power cord to el
