Inhaltszusammenfassung zur Seite Nr. 1
Instruction
ESPAÑOL: PÁGINA 29
FRANÇAIS: PAGE 57
manual
Cast Iron
Model
Oil Lube
C7510
Stationary
Air Compressor
IMPORTANT
Please make certain that the person who is
To learn more about Porter-Cable
visit our website at: to use this equipment carefully reads and
understands these instructions before
http://www.porter-cable.com
starting operations.
The Model and Serial No. plate is located on the frame.
Record these numbers in the spaces below and retain for
future reference.
Model No.
Type
Se
Inhaltszusammenfassung zur Seite Nr. 2
SAFETY GUIDELINES - DEFINITIONS This manual contains information that is important for you to know and understand. This information relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the symbols below. Please read the manual and pay attention to these symbols. Indicates an imminently Indicates a potentially hazardous situation hazardous situation which, if not avoided, will result in death which, if not avoided, may result in or se
Inhaltszusammenfassung zur Seite Nr. 3
IMPORTANT SAFETY INSTRUCTIONS Save these instructions Improper operation or maintenance of this product could result in serious injury and property damage. Read and understand all warnings and operation instructions before using this equipment. HAZARD WARNING: Risk of explosion or fire What Could Happen How To Prevent It It is normal for electrical contacts Always operate the compressor in a well within the motor and pressure switch to ventilated area free of combustible spark. materials, gasoli
Inhaltszusammenfassung zur Seite Nr. 4
HAZARD WARNING: Risk of Bursting Air Tank: The following conditions could lead to a weakening of the tank, and result in a violent tank explosion and could cause property damage or serious injury. What Could Happen How To Prevent It Failure to properly drain condensed Drain tank daily or after each use. If tank develops a leak, replace it water from tank, causing rust and thinning of the steel tank. immediately with a new tank or replace the entire compressor. Modifications or attempted repairs
Inhaltszusammenfassung zur Seite Nr. 5
HAZARD WARNING: Risk of Electrical Shock What Could Happen How To Prevent It Your air compressor is powered by Never operate the compressor outdoors electricity. Like any other electrically when it is raining or in wet conditions. powered device, If it is not used Never operate compressor with properly it may cause electric shock. protective covers removed or damaged. Repairs attempted by unqualified Any electrical wiring or repairs required personnel can result in serious injury on this product
Inhaltszusammenfassung zur Seite Nr. 6
HAZARD WARNING: Risk of Burns What Could Happen How To Prevent It Never touch any exposed metal parts Touching exposed metal such as the on compressor during or immediately compressor head or outlet tubes, can after operation. Compressor will remain result in serious burns. hot for several minutes after operation. Do not reach around protective shrouds or attempt maintenance until unit has been allowed to cool. HAZARD WARNING: Risk from Moving Parts What Could Happen How To Prevent It Moving par
Inhaltszusammenfassung zur Seite Nr. 7
HAZARD WARNING: Risk of Serious Injury or Property Damage When Transporting Compressor (Fire, Inhalation, Damage to Vehicle Surfaces) What Could Happen How To Prevent It Oil can leak or spill and could result in Always place COMPRESSOR on a fire or breathing hazard; serious injury or protective mat when transporting to death can result. Oil leaks will damage protect against damage to vehicle from carpet, paint or other surfaces in leaks. Remove COMPRESSOR from vehicles or trailers. vehicle immed
Inhaltszusammenfassung zur Seite Nr. 8
GLOSSARY Become familiar with these terms before operating the unit. CFM: Cubic feet per minute. SCFM: Standard cubic feet per minute; a unit of measure of air delivery. PSIG: Pounds per square inch gauge; a unit of measure of pressure. Code Certification: Products that bear one or more of the following marks: UL, CUL, ETL, CETL, have been evaluated by OSHA certified independent safety laboratories and meet the applicable Underwriters Laboratories Standards for Safety. Cut-In Pressure: While th
Inhaltszusammenfassung zur Seite Nr. 9
ACCESSORIES Accessories for this unit are available at the store the unit was purchased. ASSEMBLY Tools Required for Assembly 1 - 9/16” socket or open end wrench 1 - electric drill Unpacking 1. Remove all packaging. It may be necessary to brace or support one side of the outfit when removing the pallet because the air compressor will have a tendency to tip. 2. Remove and discard the (4) screws and washers holding the compressor to the pallet. 3. With the help of another person carefully remove
Inhaltszusammenfassung zur Seite Nr. 10
INSTALLATION HOW TO SET UP YOUR UNIT Location of the Air Compressor Locate the air compressor in a clean, dry, and well ventilated area. Locate the air compressor at least 12" away from the wall or other obstructions that will interfere with the flow of air. Locate the air compressor as close to the main power supply as possible to avoid using long lengths of electrical wiring. NOTE: Long lengths of electrical wiring could cause power loss to the motor. The air filter must be kept clea
Inhaltszusammenfassung zur Seite Nr. 11
Wiring Instructions RISK OF ELECTRICAL SHOCK. Improper electrical grounding can result in electrical shock. The wiring should be done by a qualified electrician to comply with national and local electrical codes. A qualified electrician needs to knows the following before wiring: 1. The amperage rating of the electrical box should be adequate. Refer to the product specifications, found in the parts manual, for this information. 2. The supply line should have the same electrical characteristics
Inhaltszusammenfassung zur Seite Nr. 12
Air Distribution System Plastic or PVC pipe is not designed for use with compressed air. Regardless of its indicated pressure rating, plastic pipe can burst from air pressure. Use only metal pipe for air distribution lines. The next figure represents a typical air distribution system. The following are tips to remember when setting up the air compressor’s air distribution system. ● Use pipe that is the same size as the air tank outlet. Piping that is too small will restrict the flow of air. ● I
Inhaltszusammenfassung zur Seite Nr. 13
OPERATION Know Your Air Compressor READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Description of Operation Become familiar with these controls before operating the unit. On/Auto/Off Switch: Turn this switch ON to provide automatic power to Pressure Switch On/Auto/Off the pressure switch and OFF to Switch remove powe
Inhaltszusammenfassung zur Seite Nr. 14
Pressure Release Valve: The pressure release Pressure Release valve, located on the side of the pressure switch, is Valve designed to automatically release compressed air from the compressor head and the outlet tube when the air compressor reaches “cut-out” pressure or is shut off. The pressure release valve allows the motor to restart freely. When the motor stops running, air will be heard escaping from this valve for a few seconds. No air should be heard leaking when the motor is running, or
Inhaltszusammenfassung zur Seite Nr. 15
Before Each Start-Up: 1. Place On/Auto/Off lever to “OFF”. 2. Close the globe valve. 3. Attach hose and accessories. NOTE: A regulator MUST be installed when using accessories rated at less than 110 PSI. Too much air pressure causes a hazardous risk of bursting. Check the manufacturer’s maximum pressure rating for air tools and accessories. The regulator outlet pressure must never exceed the maximum pressure rating. How to Start 1. Turn the On/Auto/Off lever to “AUTO” and allow tank pressure to
Inhaltszusammenfassung zur Seite Nr. 16
MAINTENANCE Unit cycles automatically when power is on. When performing maintenance, you may be exposed to voltage sources, compressed air, or moving parts. Personal injuries can occur. Before performing any maintenance or repair, disconnect power source from the compressor and bleed off all air pressure. To ensure efficient operation and longer life of the air compressor outfit, a routine maintenance schedule should be prepared and followed. The following routine maintenance schedule is geared
Inhaltszusammenfassung zur Seite Nr. 17
To Drain Tank NOTE: Operation of the air compressor will cause condensation to build up in the air tank. Always drain tank on a washable surface or into a suitable container to prevent damaging or staining surfaces. 1. Set the On/Auto/Off lever to “OFF”. 2. Close the globe valve. 3. Remove the air tool or accessory. 4. Open the globe valve and allow the air to slowly bleed from the air tank until tank pressure is approximately 20 psi. 5. Close the globe valve. 6. Drain water from air tank by op
Inhaltszusammenfassung zur Seite Nr. 18
Air Filter - Inspection and Replacement Hot surfaces. Risk of burn. Compressor heads are exposed when filter cover is removed. Allow compressor to cool prior to servicing. A dirty air filter will not allow the compressor to operate at full capacity. Keep the air filter clean at all times. 1. Remove air filter(s). 2. Remove the air filter cover (s). 3. Remove the air filter(s) from filter cover(s). IMPORTANT: Do not operate the compressor with the air filter removed. 4. Place new air filter
Inhaltszusammenfassung zur Seite Nr. 19
Downward Force 3. The belt should deflect 3/16" at midway between the pulley and the flywheel when a 5 pound weight is applied at the midway point. 3. When proper belt tension is Deflection achieved, tighten all four motor mounting screws. See Parts manual for torque specifications. NOTE: Once the engine pulley has been moved from its factory set location, the grooves of the flywheel and pulley must be aligned to within 1/16" to prevent excessive belt wear. Verify the alignment by performing the
Inhaltszusammenfassung zur Seite Nr. 20
Air Compressor Pump Intake and Exhaust Valves Once a year have a Trained Service Technician check the air compressor pump intake and exhaust valves. Inspect Air Lines and Fittings for Leaks 1. Turn air compressor off, lock out the power supply, and relieve all air pressure from the air tank. 2. Apply a soap solution to all air line fittings and connections/piping. 3. Correct any leaks found. IMPORTANT: Even minor leaks can cause the air compressor to overwork, resulting in premature breakdown or
