Inhaltszusammenfassung zur Seite Nr. 1
CD-RECEIVER
Z828MP
INSTRUCTION MANUAL
B64-2089-00 (EW)
Inhaltszusammenfassung zur Seite Nr. 2
Contents Safety precautions ........................3 Volume Offset ...........................................21 Menu settings Menu System............................................38 Handling Compact discs................6 Tuner features Code Security Function.............................39 Tuning........................................................22 Notes on playing MP3 files ...........8 Touch Sensor Tone ....................................40 Station Preset Memory......................
Inhaltszusammenfassung zur Seite Nr. 3
Safety precautions IMPORTANT INFORMATION 2WARNING 2CAUTION About the disc changer to be To prevent injury and/or fire, take the To prevent damage to the machine, connected: following precautions: take the following precautions: To connect a disc changer having the "O-N" • Insert the unit all the way until it is fully • Make sure to ground the unit to a negative switch to this unit, set the "O-N" switch to locked in place. Otherwise it may fly out of 12V DC power supply. "N". place during collis
Inhaltszusammenfassung zur Seite Nr. 4
Safety precautions • The illustrations of the display and the NOTE panel appearing in this manual are examples used to explain more clearly how • If you experience problems during the controls are used. Therefore, what installation, consult your Kenwood dealer. appears on the display in the illustrations • If the unit fails to operate properly, press may differ from what appears on the the Reset button. The unit returns to factory display on the actual equipment, and some settings when the Rese
Inhaltszusammenfassung zur Seite Nr. 5
Cleaning the Faceplate Terminals The marking of products using lasers If the terminals on the unit or faceplate get (Except for some areas) dirty, wipe them with a dry, soft cloth. CLASS 1 Cleaning the Unit LASER PRODUCT If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. The label is attached to the chassis/case and If the faceplate is stained badly, wipe the says that the component uses laser beams stain off with a cloth moistened with neutral that
Inhaltszusammenfassung zur Seite Nr. 6
Handling Compact discs Playing a CD that is dirty, scratched Storing CDs Checking New CDs for Burrs or warped can cause the sound to • Do not store CDs in areas exposed to When playing a new CD for the first time, direct sunlight – such as a car seat or check that there are not any burrs stuck to skip and the unit to operate above the fascia panel (dashboard) – or the perimeter of the disc or in the central incorrectly, resulting in worsened other hot places. hole. CDs with burrs stuck on them m
Inhaltszusammenfassung zur Seite Nr. 7
Do Not Load CD Accessories in Slot Do Not Use Special Shape CDs Do Not Use CDs with Sticker on the Do not use commercially available CD • Be sure to use round shape CDs only for Labelled Side accessories that can be loaded into the CD this unit and do not use any special shape Do not use the CD with the label sticker slot, such as stabilisers, protective sheets, CDs. Use of special shape CDs may cause stuck on it. or CD cleaning discs, since they can cause the unit to malfunction. Using such a C
Inhaltszusammenfassung zur Seite Nr. 8
Notes on playing MP3 files This unit can play MP3 files. Note, however, that the MP3 file Entering file and folder names recording media and formats acceptable are limited. When writing When entering file and folder names, use the alphanumeric MP3 files, pay attention to the following restrictions. characters described above only. If you use any other character for entry, the file and folder names are not displayed correctly. They may Acceptable media neither be displayed correctly depending on
Inhaltszusammenfassung zur Seite Nr. 9
For example, a medium with the following folder/file hierarchy is When a folder search is executed with file being played ... subject to folder search, file search, or folder select as shown below. When a folder search is executed with file currently being played, the unit selects folders as shown below, starting with Root Folder File Virtual folder folder . Example of a medium's folder/file hierarchy Medium's virtual folder/file hierarchy Operation of the button (For a file search or folder sea
Inhaltszusammenfassung zur Seite Nr. 10
General features Power Release button Turning on the power: SRC/ S.A/ PWR OFF Q ¢
2ZONE Press the SRC button. u FM NOTE Turn the power on before carrying out the following procedures. Turning off the power: AUD Hold down the PWR OFF button for one second or more. 2ZONE DAB PWR OFF NOTE The status of the Code Security Function (page 39) is displayed LOUD DISP NAME.S MENU NF whenever the power is switched on. "CODE ON" : Security Code has been registered "CODE OFF" : Security Code has not been re
Inhaltszusammenfassung zur Seite Nr. 11
NOTE Attenuator • The mode switches to the next mode from any mode which This function allows you to turn down the volume quickly. cannot be used. Turning Attenuator On/Off: • The external disc control mode will differ depending on the unit Press the ATT button to switch the attenuator on and off. that is connected. When the attenuator is off, the volume returns to the original • You cannot use the AUX input function of the optional switching level. adapter KCA-S210A if this unit is connected wi
Inhaltszusammenfassung zur Seite Nr. 12
General features • You can switch the Icon/Spectrum analyzer. Switching Display Mode See "Icon/Spectrum analyzer Select" in the menu setting (page You can select the display mode of this unit. 41). • You cannot switch into the "Display Type C" during the standby Changing the Display Mode: mode. Each time you press the DISP button, the display mode switches as follows: "Display Type A" Divide the display into the upper and lower parts Switching the Upper Part Display to separately p
Inhaltszusammenfassung zur Seite Nr. 13
In CD/External disc control mode: • In the AUX mode, the Upper Part Display comes up with the AUX-name only, providing no cycle-through displays. Track Time 3 Press the S.A button to end the display control mode. NOTE Disc name (DNPS)(only when being preset) • For display mode selection, see "Switching display mode" (page Disc Title (Units featuring CD text/MD only) 12). • The same items cannot be selected for both the upper part and Track Title (Units featuring CD text/MD only) the lower part.
Inhaltszusammenfassung zur Seite Nr. 14
General features In MP3 mode: Switching the Lower Part Display This function switches the type of information on the lower Spectrum Analyzer + Clock part display when the display mode is "Display Type A". Date + Function indicator 1 Press the S.A button to enter the display control mode. 2 Each time you press the FM or AM button, the lower part Disc name (DNPS) (only when being preset) + Function indicator display changes as follows: File name + Function indicator In Tuner mode: ID3 tag song tit
Inhaltszusammenfassung zur Seite Nr. 15
NOTE TEL Mute • For display mode selection, see "Switching display mode" (page Shut down the audio system temporarily whenever an 12). incoming call is received. • If the display mode is set to "Display Type B", you can turn on or NOTE turn off the clock. • The same items cannot be selected for both the upper part and The function will not work if a cable is not connected to the car the lower part. phone. When the telephone rings: When a call is received, "CALL" is displayed and all the unit fun
Inhaltszusammenfassung zur Seite Nr. 16
General features 2CAUTION Switching Display during the Standby mode • Do not apply excessive force to the faceplate bracket without This function switches the type of information on the display attaching the faceplate. Doing so will cause the faceplate in standby mode. bracket to be deformed. 1 Press the SRC button repeatedly to select the standby mode. • Do not touch the connector on the faceplate bracket after "ALL OFF" is displayed when the standby mode is selected. removing the faceplate. To
Inhaltszusammenfassung zur Seite Nr. 17
Switching the Preset Sound Setting: Each time you press the Q button, the preset sound setting Speaker setting mode switches as follows: Woofer setting mode User memory* Flat (Default setting) Scan of Flat – Easy Rock 4 • In speaker setting mode Easy Press either the 4 or ¢ button to select the type of *User memory: Top 40 The unit returns to the state speaker. The setting switches as follows. Jazz adjusted the last time with Off ("Speaker Setting OFF") / For 6x9/6 in. speaker ("Speaker Pops
Inhaltszusammenfassung zur Seite Nr. 18
General features Audio control features Dual Zone System The following operation allows separate sound sources to control the output of the front and rear speakers. The Dual zone system can only be switched on when the AUD ¢
FM source is set to the TV(AUX) mode. Dual Zone System On/Off: Press the 2ZONE button for at least one second to switch the AUD Dual Zone System on and off. 2ZONE DAB "Zone 2 ON" is displayed when Dual Zone System is turned on. PWR OFF NOTE LOUD DISP NAME.S MENU NF • You
Inhaltszusammenfassung zur Seite Nr. 19
Audio Control Setting Bass Centre Frequency Adjust various parameters of sound quality. Adjust the centre frequency of the bass. 1 Hold down the AUD button for one second or more to enter Display and setting: "Bass FRQ" : 60 / 70 / 80 / 100 (Only when the bass quality the control mode. factor is set to 1.00, 1.25 or 1.50) / 150 (Only 2 Selecting mode when the bass quality factor is set to 2.00) Hz. Press either the FM or AM button. Each time the button is pressed, the adjustment mode will chang
Inhaltszusammenfassung zur Seite Nr. 20
Audio control features Middle Centre Frequency Treble Level Adjust the centre frequency of the middle. Adjust the treble level. Display and setting: Display and setting: "MID FRQ" : 0.5 / 1.0 / 1.5 / 2.0 kHz. "TRE" : - 8 – + 8 Balance Level Middle Level Adjust the balance level. Adjust the middle level. Display and setting: Display and setting: "Balance" : Left 15 – Right 15 "MID" : - 8 – + 8 Fader Level Middle Quality Factor Adjust the fader level. Adjust the middle quality factor. Displa
