Inhaltszusammenfassung zur Seite Nr. 1
STAINLESS STEEL BUILT-IN WINE/BEVERAGE COOLER
INSTRUCTION MANUAL
Model No.: MCWC50DST
MCBC58DST
To ensure proper use of this appliance and your safety, please read the
following instructions completely before operating this appliance.
Inhaltszusammenfassung zur Seite Nr. 2
TABLE OF CONTENTS NAMES OF THE PARTS……………………………………………………… 2 SPECIFICATIONS…………………………………………………………….. 3 IMPORTANT SAFETY INSTRUCTIONS……………………………………. 4 INSTALLATION INSTRUCTIONS BEFORE USING YOUR APPLIANCE…………………………..…… 4 FREE STANDING INSTALLATION….………………….…………… 4 BUILT-IN INSTALLATION………..…………………………………… 5 ELECTRICAL CONNECTION ……………….………………………. 5 APPLIANCE FEATURE MCWC50DST: WINE COOLER ……………………………………... 6 MCBC58DST: BEVERAGE COOLER ……………….……………… 6
Inhaltszusammenfassung zur Seite Nr. 3
NAMES OF THE PARTS MODEL NO.: MCWC50DST ① Electronic thermostat ② Wine rack ③ Door gasket ④ Glass door ⑤ Cabinet MODEL NO.: MCBC58DST ① Electronic thermostat ② Beverage shelf ③ Door gask
Inhaltszusammenfassung zur Seite Nr. 4
SPECIFICATIONS – Model # MCWC50DST Magic Chef 50 Bottle Stainless Steel Product Description Built-In Wine Cooler Model No. MCWC50DST Unit Dimensions Width Height Depth ( inches ) 23.4” 34.4” 24.4” Net Weight ( lbs) 99 lbs SPECIFICATIONS – Model # MCBC58DST Magic Chef 5.8 cu.ft. Stainless Steel Product Description Built-In Beverage Cooler Model No. MCBC58DST Unit Dimensions Width Height Depth ( inches )
Inhaltszusammenfassung zur Seite Nr. 5
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, WARNING or injury when using your appliance, follow these basic precautions: • Read all instructions before using the wine or beverage cooler. • DANGER or WARNING: Risk of child entrapment. • To avoid the possibility of child entrapment, please take the following precautions before throwing out the appliance. - Remove all doors from the unit. - Leave the shelves in place so that children may not e
Inhaltszusammenfassung zur Seite Nr. 6
Built-In Installation The cutout dimension illustrated in figure (A) allows for door swing and access to the pull-out shelves when installed as a built-in appliance. If installing between frameless cabinets, a ½” wide filler strip or side panel may be needed on hinge side. The filler strip will act as a spacer between the appliance case and adjacent cabinet door swing. The width of the opening must include the filter panels. Note: • The door should protrude at least 1” be
Inhaltszusammenfassung zur Seite Nr. 7
APPLIANCE FEATURE MCWC50DST: Wine Cooler Engaged Wine Shelves • There are five wine shelves of full depth in upper part of cabinet to store wine bottles. • The second supporting guide (Counted from top, see illustration “A”) is not designed for wine shelves. It is only for beverage shelf. • All the top five wine shelve have tabs to engage the cabinet on both sides. • Any of the wine shelve can be removed to accommodate larger bottles. To Remove a Shelf: • Remove all bottles
Inhaltszusammenfassung zur Seite Nr. 8
OPERATING YOUR APPLIANCE MCWC50DST: Wine Cooler • The temperature range of the wine cooler is for 39°F ~ 64°F (4°C ~ 18°C) +/- 5°F. • Temperature Recommendations: Red Wine: 54°F ~ 61°F (12°C ~ 16°C) White Wine: 43°F ~ 50°F (6°C ~ 10°C) • The display indicates the average temperature of the appliance at the moment. Pre-Set Wine Zones • Press the “RED” or “WHITE” pads to choose preset storage conditions for either red or white wine. (The indicator light “RED” or “WHITE” will illum
Inhaltszusammenfassung zur Seite Nr. 9
Changing The Inner Light Before removing the inner light, turn off the appliance first and then unplug the unit from the wall outlet. Failure to do so could result in electrical shock or personal injury. • Use Phillips screwdriver to take out the screw. • Remove the transparent light cover gently. • Pull out the existing light bulb by unscrewing it counter-clockwise. • Insert new light bulb (E12, max. 15W) by screwing it in clockwise. • Replace the transparent light cover and tighten s
Inhaltszusammenfassung zur Seite Nr. 10
CARE AND MAINTENANCE Cleaning Your Appliance • Upon installation of your new appliance, it is recommended that it be cleaned thoroughly. • Turn off the appliance first and then unplug the unit from the wall outlet. • Remove all contents. • Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to a quart of water. • Be sure to keep the door gasket (seal) clean to keep the unit running efficient
Inhaltszusammenfassung zur Seite Nr. 11
TROUBLESHOOTING GUIDE You can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling for service. PROBLEM POSSIBLE CAUSE Appliance does not operate. Not plugged in. The circuit breaker tripped or a blown fuse. Temperature inside the appliance is too warm. Temperature control is set too warm. Turn the control to a cooler setting and allow several hours for the temp
Inhaltszusammenfassung zur Seite Nr. 12
Appliance Warranty MC Appliance Corporation warrants each new appliance to be free from defects in material and workmanship and agrees to remedy any such defect or to furnish a new part(s) (at the company’s option) for any part(s) of the unit that has failed during the warranty period. Parts and labor expenses are covered on this unit for a period of one year after the date of purchase. In addition, MC Appliance Corp. warrants the compressor (parts only) to be free from defects in
