Bedienungsanleitung Perlick CS1DPSP

Inhaltszusammenfassung zur Seite Nr. 1

INSTALLATION AND OPERATION INSTRUCTIONS
SINGLE DOOR BACK BAR COOLER
MODEL NOS.
CS1DPSP
Table of Contents
IMPORTANT INFORMATION
PREPARING THE CABINET FOR USE
A Warranty card is enclosed that must be filled out
Specifications.........................................................2
and mailed to the Perlick Corporation in order to reg-
List of Included Parts.............................................3
ister the warranty. If the card is not returned to
Tools Required.............................

Inhaltszusammenfassung zur Seite Nr. 2

23" R [584] Installation and Operating Instructions Sizes and Specifications, Single Door Back Bar Cooler MODEL NOS. CS1DPSP 1 CONDENSING UNIT H.P. /6h.p AMPS 3.2 SHIP WT lbs. (kg) 205 (93) INTERIOR Door Sill: Reinforced 14 gauge stainless steel sill. Door Pan: High strength polystyrene. Floor Pan: Stainless steel. Walls & Ceiling: Galvanized steel. Includes pilasters, two shelves and one (1) mini-flourescent energy efficient light. EXTERIOR Stainless steel top with square edges. Door, front, b

Inhaltszusammenfassung zur Seite Nr. 3

Preparing the Cabinet for Use – Single Door Back Bar Cooler Parts List Installing Casters (Optional) (2) Shelves. Attach four casters to the cabinet bottom; rigid cast- Mini-Flourescent Light. ers at the rear and swivel casters on the front. Use 1 3 the supplied / 4”- 20 x / 4” hex head self-tapping Shelf Clips. machine screws. Tools Required #2 Phillips Screwdriver. 10” Crescent Wrench. Placing the Cabinet 9 / 16” Allen Wrench. 3 Push the cabinet into place using rollers when / 8

Inhaltszusammenfassung zur Seite Nr. 4

General Information – Single Door Back Bar Cooler Refrigeration and Temperature Control Cleaning the Cabinet Use a mild detergent and water to clean the inside The Back Bar cabinet is equipped with a heavy- and outside of the cabinet. Dry thoroughly. Never duty refrigeration system designed to automatically use a scouring pad or abrasive cleanser. maintain a storage temperature of 36-41 degrees F. NOTE: An industrial strength, commercial cleaner The control is factory set at 38 degrees F. can b

Inhaltszusammenfassung zur Seite Nr. 5

Replacement Parts – Single Door Back Bar Cooler MODEL NOS. CS1DP Item Description Part #’s 1 Compressor for R134a C22650 2 Condenser fan motor C15240A 3 Condenser fan motor bracket 61289-1 4 Condenser fan blade C6914 5 Condenser fan pan 62209-1 6 Rear panel 62433-1 7 Back panel partition 62131-1 8 Condenser assembly C18634A 9 Condenser panel 62132-1 10 Evaporator fan guard C25400A1 1 11 Evaporator fan blade - 5 ⁄2” C14649 12 Evaporator fan motor C

Inhaltszusammenfassung zur Seite Nr. 6

Wiring Diagram – Single Door Back Bar Cooler EVAPORATOR FAN BLACK OUTLET WHITE THERMOSTAT BLACK CONDENSING UNIT BLACK WHITE POWER CONNECTION GREEN JUNCTION BLOCK 8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414-353-7060 • Fax 414-353-7069 Toll Free 800-558-5592 • E-Mail: Perlick@Perlick.com • www.Perlick.com Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Form No. Z2091A Rev. 08.03.04 6 BLACK WHITE