Inhaltszusammenfassung zur Seite Nr. 1
CD Stereo System
Operating Instructions
Model No. SC-PM9
Note:
“EB” on the packaging indicates the United Kingdom.
Before connecting, operating or adjusting this product, please read these
instructions completely. Please keep this manual for future reference.
Table of contents
Before use
Safety precautions .................................. 2
Supplied accessories ............................. 3
Caution for AC Mains Lead .................... 3
The remote control..................................
Inhaltszusammenfassung zur Seite Nr. 2
Before use Dear customer Safety precautions Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Placement Set the unit up on an even surface away from direct These operating instructions are applicable to the following sunlight, high temperatures, high humidity, and excessive system. vibration. These conditions can damage the cabinet and other components, thereby shortening the unit’s service life. System SC-PM9 Place it at least 1
Inhaltszusammenfassung zur Seite Nr. 3
Caution for AC Mains Lead Supplied accessories (For United Kingdom) Please check and identify the supplied accessories. (“EB” area code model only) Use numbers indicated in parentheses For your safety, please read the following text carefully. when asking for replacement parts. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. AC mains lead ............................................. 1 pc. A 5-ampere fuse is fitted in this plug. For the United For
Inhaltszusammenfassung zur Seite Nr. 4
AM ANT EXT LOOP FM ANT 75 A The remote control A Batteries • Insert so the poles (+ and –) match those in the remote control. • Do not use rechargeable type batteries. Do not: • mix old and new batteries. • use different types at the same time. R6, AA, UM-3 • heat or expose to flame. • take apart or short circuit. • attempt to recharge alkaline or manganese batteries. • use batteries if the covering has been peeled off. Mishandling of batteries can cause electrolyte leakage which can damage ite
Inhaltszusammenfassung zur Seite Nr. 5
AM ANT EXT LOOP FM ANT 75 AM ANT EXT LOOP FM ANT 75 AM ANT EXT LOOP FM ANT 75 Connections 2 2 Connect the AM loop antenna. AM loop antenna After attaching the antenna, turn on the system and tune in a broadcast station. Put the antenna where the reception is best and interference is minimal. 3 Connect the speaker cables. Connect the speaker cords without tags to the black terminals, so (+) and (–) are correct. Connect the speaker cords with red tags to the red 1 terminals, so (+) and (–) are cor
Inhaltszusammenfassung zur Seite Nr. 6
Front panel controls A Top of the unit PHONES 1 A Main unit 1 Headphone jack (PHONES).................................... 19 2 Cassette lid 3 Cassette deck open button (OPEN 0) .................. 16 4 Display 5 Remote control signal sensor 2 6 Album or .......................................................... 13 7 Tuner/band select button (TUNER/BAND) .............. 8 OPEN 8 AC supply indicator (AC IN) 3 This indicator lights when the unit is connected to the AC mains supply. 9 Standby/on swit
Inhaltszusammenfassung zur Seite Nr. 7
A Demo function A When the unit is first plugged in, a demonstration of its func- tions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting “DEMO ON”. Press and hold [STOP 7, –DEMO]. The display changes each time the button is held down. DEMO OFF DEMO ON STOP7, While in the standby mode, select “DEMO OFF” to reduce power –DEMO consumption. B Setting the time This is a 24-hour clock. B The example shows how to set the clock for 18:30 (6:30 pm). 1 2
Inhaltszusammenfassung zur Seite Nr. 8
The radio: manual tuning 1 Press [TUNER/BAND] to select “FM” or “AM”. The unit comes on automatically. Every time you press the button: FM AM 2 1 4 2 Press [PLAY MODE] on the remote control to se- lect the manual tuning mode. 3 MANUAL PRESET 3 Press [44444/REW/4] or [33333/FF/¢] to select the fre- quency of the required station. “TUNED” is displayed when a radio station is tuned. TUNER BAND 1 “ ST ” is displayed when a stereo FM broadcast is being received. 4 Adjust the volume. PLAY MODE Auto t
Inhaltszusammenfassung zur Seite Nr. 9
The radio: preset tuning A PROGRAM – CLEAR There are two methods of presetting stations. Automatic presetting: Stations the tuner can receive are pre- set automatically. Manual presetting: You can select the stations to preset and the order they are preset in. TUNER/ BAND Up to 15 stations each can be set in the FM and AM bands. Preparation: Press [TUNER/BAND] to select “FM” or “AM”. B 2 A Automatic presetting 3 Do the following once each for FM and AM. Preparation: Tune to the frequency where p
Inhaltszusammenfassung zur Seite Nr. 10
CDs This unit can play CD-DA (digital audio) format audio CD-R and CD-RW that have been finalized (a process performed af- ter recording that enables this unit to play audio CD-R and CD- RW). It may not be able to play some CD-R or CD-RW due to the 3 condition of the recording. 1 Press [yyyyy/I] to turn the unit on. 4 1 2 Press [0 OPEN/CLOSE] to load a CD, then press 2 [0 OPEN/CLOSE] again. /REW/ , // FF 3 Press [CD 3/8] to start play. 4 Adjust the volume. To Action Label must face upward. stop
Inhaltszusammenfassung zur Seite Nr. 11
CDs A A CD Play Mode function 2 3 Mode To play 1-TRACK one selected track on the disc. RANDOM a disc in random order. 1 1 Press [CD 3/8] and then [STOP 7]. 2 Press [PLAY MODE] to select your desired mode. 1-TRACK RANDOM Original display 3 • When “1-TRACK” is selected in step 2 CD STOP 7 1 Select the track with the numeric buttons to start play. To select track 10 or over, press [h10] then the two digits. • When “RANDOM” is selected in step 2 Press [CD 3/8] to play CD. To stop play Press [STOP
Inhaltszusammenfassung zur Seite Nr. 12
CDs A A CD display This function allows you to display the remaining play time of DISPLAY the current track. During play or pause mode Press [DISPLAY]. Every time you press the button: Elapsed play time ↔ Remaining play time B Program play This function allows you to program up to 24 tracks. 1 Press [CD 3/8] and then [STOP 7]. B 2 (In the stop mode) Press [PROGRAM, –CLEAR]. 2 3 Press numeric buttons to select the desired track. 34 DEL 4 Repeat step 3 to program other tracks. 5 5 Press [CD 3/8].
Inhaltszusammenfassung zur Seite Nr. 13
Enjoying MP3 This unit can play MP3 files recorded on CD-R/RW. ALBUM Files are treated as tracks and folders are treated as albums. ( , ) This unit can access up to 999 tracks, 400 albums and 20 ses- sions. ALBUM TRACK , 4 , ¢ When making MP3 files to play on this unit CD 6 CD 6 Disc format Discs must conform to ISO9660 level 1 or 2 (except for ex- 4 /REW/ 4, tended formats). 3 /FF/ ¢ File format MP3 files must have the extension “.MP3” or “.mp3”. To play in a certain order ALBUM Prefix
Inhaltszusammenfassung zur Seite Nr. 14
Enjoying MP3 A 2 STOP7 A INTRO function (Album scan) You can find an album by listening to the first track of all 1 albums in the current disc for 10 seconds each. Preparation: Press [CD 3/8] and then [STOP 7]. INTRO 1 1 Press [INTRO]. INTRO function starts. (INTRO function is cancelled after playing the first track in the last album on the current disc.) 2 While your desired album is playing, press [CD 3/8]. CD 2 Play starts from the first track of the album. To stop during the process, press [
Inhaltszusammenfassung zur Seite Nr. 15
Enjoying MP3 A A Entering characters Numeric buttons You can enter keyword of up to 9 characters for album/track title search. 1 Press the numeric button to select the required character. Characters allocated to the numbered buttons: 4 /REW/ 4, Numbered Characters Numbered Characters 3 /FF/ ¢ buttons buttons 11 6 M N O 6 2 A B C 2 7 P Q R S 7 B 3 D E F 3 8 T U V 8 4 G H I 4 9 W X Y Z 9 5 J K L 5 00 1 h10 space !”#$ %&’()∗+,– ./:;=?_8 The characters change each time a numbered button is pressed.
Inhaltszusammenfassung zur Seite Nr. 16
OPEN Top of the unit Cassette tapes 1 Press [OPEN 0] to insert a cassette with the tape facing in. When the button is pressed, the unit comes on automatically. Make sure the cassette is fully inserted and close the lid by hand. 2 Press [TAPE 3] to start playback. One side is played, then playback stops automatically. To play on the other side of the cassette, turn the cassette 1 over and press [TAPE 3]. 3 Adjust the volume. To Action stop tape playback Press [STOP 7]. start one touch play Press
Inhaltszusammenfassung zur Seite Nr. 17
OPEN Before recording A 1 Types of tapes which can be recorded correctly Use normal position tapes. High position and metal position tapes can be used, but the unit will not be able to record or erase them correctly. The effect of volume and sound quality on recording 3 These have no effect on recording. They can be changed for playback. STOP , –DEMO A Recording the radio Preparation: • Wind up the leader tape. • To record from halfway through the tape OPEN Wind the tape up to where you want to
Inhaltszusammenfassung zur Seite Nr. 18
Recording CDs A Preparation: • Tracks are recorded in the order in which they are found on the CD. ALBUM • Tracks are cut in the middle when the end of the tape is reached. ( , ) • You can record from any point on the tape. 3 A To record specific CDs/tracks 2 1 1 Press [CD 3/8] and then [STOP 7]. 2 Press [PLAY MODE] to select your desired mode. 1-TRACK 1-ALBUM (MP3) RANDOM Original display 4 /REW/ 4, 4 /REW/ 4, 3 /FF/ ¢ 3 /FF/ ¢ Mode To 1-TRACK record one selected track on the disc. 1-AL
Inhaltszusammenfassung zur Seite Nr. 19
Timers and others Sound Quality SLEEP –AUTO OFF Using the built-in sound quality settings You can choose one of four types of sound quality with Preset EQ or enhances the bass and treble effect of the sound with Manual EQ. VOL –, + VOL A Preset EQ 1 Press and hold [SOUND] to select “PRESET EQ”. SOUND SURROUND 2 Press [SOUND] to select a setting. B Manual EQ 1 Press and hold [SOUND] to select “MANUAL EQ”. A 2 Press [SOUND] to select a setting. SOUND 1 3 Press [VOL –] or [+ VOL] to adjust to the
Inhaltszusammenfassung zur Seite Nr. 20
Using the timers 4 5 2 2 1 2 3 Using the play/record timer The timer has two functions. It can be set to on at a certain time to wake you up, or it can be set to record the radio. The play timer cannot be used in combination with the record timer. Preparations: • Turn the unit on and set the clock (\ page 7). 11 2 3 • For the play timer, prepare the music source you want to listen to; cassette, CD or radio, and set the volume. • For the record timer, check the cassette’s erasure pr
