Inhaltszusammenfassung zur Seite Nr. 1
D00816700C
Super Audio CD/CD Player
Owner’s Manual .................... 2
Manuel du Propriétaire ........... 23
Bedienungsanleitung.............. 44
Inhaltszusammenfassung zur Seite Nr. 2
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, CAUTION DO NOT REMOVE COVER (OR BACK). NO USER- < DO NOT REMOVE THE EXTERNAL CASES OR CABINETS TO SERVICEABLE PARTS INSIDE. REFER SERVICING TO EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS QUALIFIED SERVICE PERSONNEL. ARE WITHIN! The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the < IF YOU ARE EX
Inhaltszusammenfassung zur Seite Nr. 3
ENGLISH This product has been designed and manufactured according to Contents FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the Radiation Control for Health and Safety Act of 1968”, and is classified as class 1 laser product. There is not hazardous invisible laser radiation during operation because invisible laser radiation Thank you for choosing TEAC. Read this manual carefully emitted inside of this product is completely confined in the to get the best performance from thi
Inhaltszusammenfassung zur Seite Nr. 4
Features The world’s first VRDS mechanism for Super Brushed aluminum finish exemplifies the Audio CD players, incorporating a magnesium quality of construction turntable and a SS400 bridge The front, side and top panels are constructed of thick brushed aluminum. The high-quality luxurious finish matches The VDRS mechanism completely eliminates any vibration of the overall attention to the finest possible quality, shown in the disc itself, thanks to the full-diameter clamp, which such details as
Inhaltszusammenfassung zur Seite Nr. 5
ENGLISH Before Use What’s in the box Placement of the unit Please confirm that the following accessories are in the box High-quality hardened tool steel is used for the pin-point feet, when you open it. securely attached to the bottom of the player. Although the cover feet may appear loose, the weight of the unit causes them Remote control unit x 1 to be firm and secure, and the design effectively damps and Batteries (AA, R6, SUM-3) x 2 reduces vibration. Felt sheet x 3 Power cord x 1 < Be caref
Inhaltszusammenfassung zur Seite Nr. 6
Discs < Always place the disc on the disc tray with the label side Type of Discs That Can be Played on This uppermost. (Compact discs can be played or recorded only on System one side.) This player can playback discs bearing any of the following logos: < To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Audio CD: • 12cm or 8cm discs • Linear PCM digital audio Audio CDs are divided into tracks. How to remove the
Inhaltszusammenfassung zur Seite Nr. 7
ENGLISH Remote Control Unit Restoring factory settings If you have made a lot of changes to the setup, and want to How to insert the batteries restart from a known set of options, restore the unit to the Remove the cover of the remote control unit with a factory settings as follows: screwdriver. After checking the polarity (+/_) of two AA batteries, insert the batteries, replace the cover and replace the screws. 1.With the unit turned off, press and hold down the STOP button. 2.While holding dow
Inhaltszusammenfassung zur Seite Nr. 8
Supplied power cord RCA coaxial cable optical digital cable BNC coaxial cable RCA cable XLR cable Connections CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables. Master clock generator (G-0s, etc.) WORD SYNC OUT Stereo amplifier Balan
Inhaltszusammenfassung zur Seite Nr. 9
ENGLISH A C Analog audio output terminals Word sync connector Use either the XLR or RCA (pin) FRONT terminals for analog This allows the use of an externally-generated word clock stereo output. connection, using a commercially available BNC coaxial If your amplifier has balanced XLR analog audio inputs, cable. connect the XLR jacks on the unit to the amplifier’s XLR Devices producing such a suitable clock signal include jacks, otherwise use the RCA (pin) connections. external D-A converters, or
Inhaltszusammenfassung zur Seite Nr. 10
Front panel features A B C D E F G H I J Front Panel Display A POWER e a c b d f Use this to turn the unit on and off. When the unit is on, the ring surrounding the button lights up. The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the OFF position. j g h k i B CLOCK MODE a Use this to select an external word sync source connected to Disc type indicator C the WORD SYNC connector on the rear panel. Shows the type of disc currently loaded. C Remote contro
Inhaltszusammenfassung zur Seite Nr. 11
ENGLISH Understanding the remote control unit A Number buttons Use these for selecting tracks by number, etc. B 2CH/MULTI Use this to switch between two-channel (stereo) and multi- channel surround audio output. C PLAY AREA Use this to select the playback area of Super Audio CDs. D SCAN (m/,) Use these for fast scanning during playback. E STOP Equivalent to pushing the STOP button on the front panel. I F PLAY Equivalent to pushing the PLAY button on the front panel. A G Cursor buttons and ENTER
Inhaltszusammenfassung zur Seite Nr. 12
Playback 5 Press the PLAY button to start playback. 3 2 4 1 5 Pausing playback 1 Turn on the power using the POWER button on the main unit. The button and the display light. Press the PAUSE button to pause playback (the ring 2 Press the OPEN/CLOSE button. surrounding the PAUSE button on the main unit lights). Press PLAY or PAUSE to restart playback. Stopping playback The tray opens after a second or two (this delay is due to the movement of the internal mechanism of the unit before opening). 3
Inhaltszusammenfassung zur Seite Nr. 13
ENGLISH Skipping playback Fast scanning Press the MUSIC SKIP button (. or /) repeatedly until When playing back, use the SCAN button (m or ,) to the desired track is found. The selected track will be played move backwards and forwards. Press PLAY to restart playback from the beginning. at normal speed at the desired location. Repeated presses of the SCAN buttons changes the scanning < If the . button is pressed once during playback, playback speeds. There are three speeds: returns to the start o
Inhaltszusammenfassung zur Seite Nr. 14
Programmed playback Programmed playback allows up to 30 tracks to be played Clearing the last track from the list back in the order you decide. Push the CLEAR button to clear the last track from the list. 1 Press the PROGRAM button (either when playing back or stopped). If a track is currently playing back (or paused in the middle of the track), this track is added as the first item in the programmed playback list. Adding tracks to the list Use the number buttons to add tracks to the list. 2 Use
Inhaltszusammenfassung zur Seite Nr. 15
ENGLISH Repeat mode Display dimming Use the REPEAT button to select the repeat mode for The display on the main unit can be dimmed to suit the playback. Repeated presses of the REPEAT button cycle environment in which you listen to music. There are three levels between the following options: and an “off” setting. Use the FL DIMMER button to cycle between these settings. REPEAT TRK REPEAT DSC (track repeat) (whole disc repeat) Note that the OFF setting is not memorized when the power is REPEAT O
Inhaltszusammenfassung zur Seite Nr. 16
Changing the display mode Clock Mode During playback, it is possible to change the display as shown For highly accurate playback, you can use the word clock here. (sync) output of an external unit such as the Esoteric D-70 or G-0 to synchronize your whole audio system. < The DISPLAY button doesn’t work during programmed playback. Use the CLOCK MODE (main unit) button to switch between Word M1 ON and Word OFF. When the unit is synchronizing to the external clock, the ring surrounding the button f
Inhaltszusammenfassung zur Seite Nr. 17
ENGLISH Settings (introduction) 1 4 Turn on the main unit. When a option marked with “>” is displayed, use the up or down cursor buttons to change the setting, and press the ENTER button to confirm the entry. < When a numerical value (such as speaker distance) is 2 Press the SETUP button to enter the setup menu. changed, the value is confirmed without pressing the ENTER button. < Individual menu functions are described on page 19 and 20. 3 4
Inhaltszusammenfassung zur Seite Nr. 18
Settings (introduction) AudioSetup GeneralSet Analog Out options SP Setup SP Size L/R Size options DigitalOut options C Size options CD Direct options SR/SL Size options SW ON/OFF options Distance L/R *.*m options C *.*m options SR/SL *.*m options SP Level LR ***.*dB options C ***.*dB options SR ***.*-dB options SL ***.*dB options SW ***.*dB options Test Start Test Tone options 18
Inhaltszusammenfassung zur Seite Nr. 19
ENGLISH Settings (Audio Setup) Settings (Speaker Setup 1) Use these speaker setup menus when connecting an AV Analog output settings (Analog Out) amplifier with analog outputs, using the 5.1 multi-channel When a option marked with “>” is displayed, use the up or setting (there is no need for this setup when not using multi- down cursor buttons to change the setting, and press the channel analog connections). ENTER button to confirm the entry. When “Direct” is chosen as the CD playback option (s
Inhaltszusammenfassung zur Seite Nr. 20
Settings (Speaker Setup 2) Speaker distance Speaker levels (SP Level) Ideally, the speakers should be placed so that they are all the Use this to set the relative levels of the speakers. You can set same distance from the listening position. If this is not the L/R pair together, and the center, and surround rear pair possible, you should use this method described here to adjust independently, as well as the subwoofer. The maximum value them individually. It is also possible to adjust all distanc
