Bedienungsanleitung Grizzly G1183/G1276

Bedienungsanleitung für das Gerät Grizzly G1183/G1276

Gerät: Grizzly G1183/G1276
Kategorie: Schleifmaschine
Produzent: Grizzly
Größe: 1.18 MB
Datum des Hinzufügens: 4/7/2013
Seitenanzahl: 34
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Grizzly G1183/G1276 zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Grizzly G1183/G1276 finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Grizzly G1183/G1276 auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Grizzly G1183/G1276 im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Grizzly G1183/G1276 auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Grizzly G1183/G1276 Handbuch - Online PDF
Advertisement
« Page 1 of 34 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Grizzly G1183/G1276 Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Grizzly G1183/G1276 befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

COMBINATION SANDER
MODEL G1183/G1276
INSTRUCTION MANUAL
COPYRIGHT © 1989 BY GRIZZLY IMPORTS, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC.
REVISED APRIL, 1999. PRINTED IN U.S.A.

Inhaltszusammenfassung zur Seite Nr. 2

Inhaltszusammenfassung zur Seite Nr. 3

TABLE OF CONTENTS PAGE 1. SAFETY RULES SAFETY RULES FOR POWER TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3 ADDITIONAL SAFETY INSTRUCTIONS FOR THE SANDER . . . . . . . . . . . . . . . . .4 2. CIRCUIT REQUIREMENTS 110/220V OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 GROUNDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 FUSING . . . . . . . . . . . .

Inhaltszusammenfassung zur Seite Nr. 4

SECTION 1: SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substi- tute for proper accident prevention measures.

Inhaltszusammenfassung zur Seite Nr. 5

Safety Instructions For Power Tools 9. USE PROPER EXTENSION CORD. Make 13. DON’T OVERREACH. Keep proper foot- sure your extension cord is in good condi- ing and balance at all times. tion. Conductor size should be in accor- dance with the chart below. The amperage 14. MAINTAIN TOOLS WITH CARE. Keep rating should be listed on the motor or tool tools sharp and clean for best and safest nameplate. An undersized cord will cause a performance. Follow instructions for lubri- drop in line voltage resul

Inhaltszusammenfassung zur Seite Nr. 6

Additional Safety Instructions For The Sander 1. Be aware of belt or disc rotation direction 6. Even if you have a reliable method of dust when sanding. collection, use a dust mask or respirator when sanding. Use eye and hearing pro- 2. Keep fingertips away from moving parts. tection as well. 3. Never use excessive force when sanding. 7. DO NOT sand material when you doubt its Doing so greatly increases the chance of stability or integrity. Inspect all materials personal injury, mechanical damag

Inhaltszusammenfassung zur Seite Nr. 7

SECTION 2: CIRCUIT REQUIREMENTS 110/220V Operation Grounding The Model G1183/1276 is prewired for 110V, sin- In the event of an electrical short, grounding gle phase operation. Figure 1 depicts the typical reduces the risk of electric shock by providing a path of least resistance to disperse electric cur- grounded receptacle which should be used. This rent. This tool is equipped with a power cord hav- machine can be rewired to operate at 220V, how- ing an equipment-grounding conductor. See ever

Inhaltszusammenfassung zur Seite Nr. 8

Wiring Diagram Extension Cords If you find it necessary to use an extension cord Your G1183/1276 machine comes pre-wired for with the Model G1183/1276, make sure the cord 110 volt operation. A wiring diagram is provided is rated Hard Service (grade S) or better. Refer to at the back of this manual should it be necessary the chart in the standard safety instructions to to repair or revise the wiring. Always utilize a qualified electrician when doing any electrical determine the minimum gauge for

Inhaltszusammenfassung zur Seite Nr. 9

SECTION 3: GENERAL INFORMATION Most importantly, we stand behind our machines. Commentary We have an excellent service department at your disposal should the need arise. If you have any service questions or parts requests, please call or write to us at the location listed below. Grizzly Industrial, Inc. is proud to offer the Model G1183 6" x 48" – 12" Disc Combination Sander Grizzly Industrial, Inc. and its slower-speed version, the Model G1276. 1203 Lycoming Mall Circle This saw is a part of Gr

Inhaltszusammenfassung zur Seite Nr. 10

Unpacking Piece Inventory The Combination Sander is shipped from the fac- With all the parts removed from the container, tory in a carefully packed carton. If you find the you should have components as listed below and machine to be damaged after you’ve signed for shown in Figure 3: delivery and the truck and driver are already gone, you will need to file a freight claim with the • Motor Body and Belt Assembly carrier. Save the containers and all packing mate- • Disc Table rials for inspection b

Inhaltszusammenfassung zur Seite Nr. 11

Clean Up Site Considerations The unpainted surfaces are coated with a waxy BENCH LOAD oil to protect it from corrosion during shipment. The G1183/1276 Combination Sander repre- Remove this protective coating with a solvent sents a moderately large weight load in a small cleaner or citrus-based degreaser. Avoid chlo- footprint. Most commercial or home shop bench- rine-based solvents as they may damage painted es should be sufficient to carry the weight of the surfaces should they come in contact.

Inhaltszusammenfassung zur Seite Nr. 12

SECTION 4: ASSEMBLY Assembly Basics Most of your Combination Sander has been assembled at the factory. There are several sim- ple steps to follow to complete the assembly. A few common tools will be required for assem- bly: Screwdrivers - medium and large straight ® ® blade or Phillips , Allen wrenches - 2mm, 3mm, 6mm and open end wrenches - 8mm and 10mm. Belt Table Figure 4. Attaching belt table. The belt table adjusts to allow you to sand your work at angles from -30° up to 45°. To make assem

Inhaltszusammenfassung zur Seite Nr. 13

Disc Table Belt Lever The disc table adjusts to allow you to sand your The belt lever is used for releasing the tension on work at angles from -20° up to 45°. To install the the idler pulley for belt installation. To attach the disc table: belt lever: 1. Loosen the two star knobs at either end of 1. Thread the belt lever onto the loosen/tighten the disc table base until they reach the collar and secure with the checknut. See ends of their threaded rods. Figure 7. 2. Move the sliding rails and th

Inhaltszusammenfassung zur Seite Nr. 14

SECTION 5: ADJUSTMENTS Proper adjustment of the Combination Sander is essential to ensure its optimum performance. The adjustments covered in this section are easily accomplished. Tables Tables should be square in both planes to exe- cute precise work. Procedures for accomplishing this are described below. 1. Adjust the miter gauge to 90°. You can use it as a reference point from which to make Figure 9. Squaring disc table. other adjustments. 2. Place the miter gauge in the table slot and, with

Inhaltszusammenfassung zur Seite Nr. 15

6. Repeat this procedure with the 45° stop. You’ll need a known 45° angle, such as a Belt Platen speed square or the head of a combination square to check accuracy. The belt platen should be adjusted out far enough so it is flush with, or slightly higher than the upper roller. The rollers are slightly crowned, that is they are higher in the center than at the edges. This crowning helps the belt to stay centralized on the rollers. The adjustment of the platen to the roller should be done at the h

Inhaltszusammenfassung zur Seite Nr. 16

Disc Guard Belt Arm Movement 1. Loosen the two screws (A and B) shown in The 6" x 48" Belt Arm can be locked at any angle Figure 12. These screws hold the guard in between horizontal and vertical for a variety of place. sanding applications. 2. Adjust the two vertically-aligned screws (C 1. Loosen the locking bolt as shown in Figure and D in Figure 12) so the guard is upright 13. and not touching the disc. The top screw moves the guard toward the disc and the bottom screw moves it away from the

Inhaltszusammenfassung zur Seite Nr. 17

Belt Installation Belt Tracking The 6'' x 48'' sanding belt is easily installed. First Tracking adjustment is conducted as follows: remove the belt guard by loosening the four com- bination-head screws. Pull down on the spring 1. Insure that the upper roller is parallel to the loaded belt tensioning lever which lowers the platen (there is no adjustment for the lower upper roller and allows the belt to be slid off of the roller). This adjustment is easier to accom- two rollers. See Figure 14. pli

Inhaltszusammenfassung zur Seite Nr. 18

5. With the straightedge along the edge which 9. Test the tracking by cycling the machine on is low, loosen the knurled locking nut and and off very quickly. See if the belt stays turn the tracking knob while watching the centered during this test cycle. If the belt gap change between the straight edge and doesn’t remain centered on the rollers, it the roller. Make small changes and check must be adjusted further. for a change in gap on the opposite side. 6. When the gap has been equalized betwe

Inhaltszusammenfassung zur Seite Nr. 19

SECTION 6: OPERATIONS The aluminum disc accepts 12" diameter cloth or Table Tilt paper-backed PSA sanding discs. The belt sander requires a 6" x 48" sanding belt. For disc or belt sanding, we recommend a 100-grit (medi- um) material for general sanding chores, a 60-grit The belt table can be adjusted from -30˚ to 45˚ (coarse) material for rough work, and a 150-grit and the disc table can go from -20˚ to 45˚ relative (fine) surface for finish work. See the current to the plane of the sanding surf

Inhaltszusammenfassung zur Seite Nr. 20

Disc Sanding Surface Sanding 1. Loosen table lock knob and tilt work table to To remove a large amount of material quickly desired angle. Tighten lock knob. from a large surface area, use the belt arm in its horizontal position. 2. Use miter gauge to guide work into position. 1. Turn the sander on and let it reach its full 3. Ease workpiece into the half of the disc that working speed. spins down toward the table. See Figure 17. 2. Place the workpiece flat on the belt. Be sure to hold the work s


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Grizzly 7" Angle Polisher H0593 Handbuch Schleifmaschine 0
2 Grizzly 37'' WIDE BELT G0446 Handbuch Schleifmaschine 0
3 Grizzly 37'' WIDE BELT G0539 Handbuch Schleifmaschine 1
4 Grizzly Air Belt H0596 Handbuch Schleifmaschine 0
5 Grizzly Belt G0581 Handbuch Schleifmaschine 2
6 Grizzly Bending Brake T21319 Handbuch Schleifmaschine 0
7 Grizzly 9962ZX Handbuch Schleifmaschine 0
8 Grizzly BLU-RAY DISC DRIVE GBC-H20L Handbuch Schleifmaschine 2
9 Grizzly Belt H2933 Handbuch Schleifmaschine 0
10 Grizzly 37'' WIDE BELT G0571 Handbuch Schleifmaschine 1
11 Grizzly Double head Wide Belt G0581 Handbuch Schleifmaschine 1
12 Grizzly Drum H2882 Handbuch Schleifmaschine 0
13 Grizzly Disc G0724 Handbuch Schleifmaschine 0
14 Grizzly Double head Wide Belt H2933 Handbuch Schleifmaschine 1
15 Grizzly G0446 Handbuch Schleifmaschine 0
16 3Com Tech Note Wireless Remote Control TT24 Handbuch Schleifmaschine 2
17 Agilent Technologies 16440A SMU Handbuch Schleifmaschine 0
18 Alpha Industries AEP-458 Handbuch Schleifmaschine 0
19 Bausch & Lomb DISCOVERER 78-1600 Handbuch Schleifmaschine 12
20 Agilent Technologies 83485A Handbuch Schleifmaschine 1