Inhaltszusammenfassung zur Seite Nr. 1
Embroidery Machine
Operation Manual Addendum
Product Code: 884-T07
Inhaltszusammenfassung zur Seite Nr. 2
Additional Features of PR650e The following features have been added with version 2 and 3. Before using the machine, carefully read both this manual and the Operation manual (which provides descriptions of Ver. 1) included with your PR650e machine. ■ Ten embroidery patterns ( ) have been added. For details on the patterns, refer to the Quick Reference Guide. ■ The brightness of your LCD screen can be adjusted. (p. 1) ■ The thread color settings for previously stitched designs can be canceled.
Inhaltszusammenfassung zur Seite Nr. 3
Cancelling the Thread Color Settings for All Previously Stitched Design Touch . 3 Note Thread colors are assigned by the machine ● The color settings will be completely again, regardless of the previous spool canceled even if the machine is in the setting. middle of the embroidery. Note Touch . ● This function will not clear anchor settings 1 of any of the needles which have been assigned a thread color (Refer to “Reserved Needle Bar Settings” on page 132 in the PR650e Operation Manua
Inhaltszusammenfassung zur Seite Nr. 4
Moving Five Hundred Stitches Forward/Back and have been added to the stitch navigation screen. For details on moving forward or backward through the stitching, refer to “Embroidering From the Beginning or Middle of the Pattern” on page 108 of the PR650e Operation Manual. Each touch of this key moves five hundred stitches back through the stitching. Each touch of this key moves five hundred stitches forward through the stitching. Editing Patterns as a Group Combined patterns can be gro
Inhaltszusammenfassung zur Seite Nr. 5
If necessary, touch so that the patterns Sewing the repeated 3 are regrouped. pattern without sorting colors With repeated patterns created using the border function, pressing automatically changes the sewing order of the colors so that the same color can be continuously sewn. You can edit the pattern according to the procedure below to sew the repeated pattern without sorting the colors. Create the combined border embroidery 1 pattern (Refer to “Designing repeated patterns” on page
Inhaltszusammenfassung zur Seite Nr. 6
Touch , then . 5 Sending Embroidery Patterns From a Computer to the Machine (Link Function) ■ Check the sewing status of the embroidery machine (this model) from the computer Operations available with (Example of multiple machines connected) the Link function ■ Send multiple embroidery patterns to connected embroidery machines As many as 100 embroidery patterns can be transferred to an embroidery machine, and the embroidering status of the patterns being transferred can be viewed from the
Inhaltszusammenfassung zur Seite Nr. 7
Memo Touch to enable the Link function. 2 ● When connecting multiple embroidery machines to the computer, use a commercially available USB hub. Please note that we recommend using a self-powered USB hub. Do not use USB When the following message appears, extension cables or repeater cables. For details on using the USB hub, refer to its touch . operating instructions. Embroidering using the Link function First, use the embroidery editing software to create the embroidery pattern to be
Inhaltszusammenfassung zur Seite Nr. 8
Turn on the machine. 5 Note ● For details on using the embroidery editing software, refer to the Instruction Manual included with the software. * This Link dialog box is found in PE-DESIGN NEXT software. Using embroidery editing software provided 6 with the Link function, such as PE-DESIGN ● If the following error message appears, the NEXT, or later, will allow you to send the type of embroidery frame installed on the embroidery pattern(s) to the machine in the machine is not compatible
Inhaltszusammenfassung zur Seite Nr. 9
After the embroidery pattern has been To change the embroidery settings for the 8 9 opened by the machine, the embroidering opened embroidery pattern, touch . screen appears. � Touch when the following message The opened embroidery pattern appears in the pattern display area with the icon for appears. Touch to return to the the Link function. embroidering screen. 1 2 3 The embroidery settings screen appears. After the desired settings have been 0 specified, touch to return to the em
Inhaltszusammenfassung zur Seite Nr. 10
To open another pattern sent from the b Disabling the Link function computer, touch , and then repeat the procedure starting from step 8 to continue Touch , and then touch and 1 embroidering. to display page 5 of the machine settings � To stop embroidering or to embroider the screen. same pattern again, touch . Touch to disable the Link function. 2 Note ● The embroidering screen settings specified in step 0 are saved even if was touched to continue sewing after embroidering is finis
Inhaltszusammenfassung zur Seite Nr. 11
. Error messages in the Link function Machine failed to communicate Machine cannot receive any data with the PC in the Link mode. from the PC in the Link mode. Turn the machine off, and then turn Turn off the machine, and check the machine on again. the USB connection. After connecting the USB cord securely, turn on the machine again. Selecting the Thread Color Information for “PES” Format Data Refer to page 194 in the PR650e Operation Manual for the details of understanding the machin
Inhaltszusammenfassung zur Seite Nr. 12
Checking the Length of Time until the Machine’s Next Stop The length of time until the embroidery machine's next stop can be viewed in the embroidering Note screen. ● The displayed information differs from that The machine stops when a spool change is in Ver. 1 (described in the PR650e required, or when the machine is set to be stopped Operation Manual). by other settings. If the spool change indicator appears, the machine will require a spool change. When the time is indicated in red,
