Bedienungsanleitung Graco Inc. 310824D

Bedienungsanleitung für das Gerät Graco Inc. 310824D

Gerät: Graco Inc. 310824D
Kategorie: Malpistole
Produzent: Graco Inc.
Größe: 2.18 MB
Datum des Hinzufügens: 6/10/2013
Seitenanzahl: 30
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Graco Inc. 310824D zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Graco Inc. 310824D finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Graco Inc. 310824D auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Graco Inc. 310824D im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Graco Inc. 310824D auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Graco Inc. 310824D Handbuch - Online PDF
Advertisement
« Page 1 of 30 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Graco Inc. 310824D Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Graco Inc. 310824D befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

Repair

390 Airless Sprayer
310824D
- For portable spray applications of architectural paints and coatings -
3300 psi (22.7MPa, 227bar) Maximum Working Pressure
IMPORTANT SAFETY INSTRUCTIONS!
Read all warnings and instructions. Save these instructions. Contact Graco Customer Service
or your local Graco distributor to obtain a manual in your language.
Related Manuals
310820
309639
309250
ti11608a
Stand
310876
ti11626a
Hi-Boy
ti11583a
ProStep
Model* VAC Country

120 North America
262019, 25

Inhaltszusammenfassung zur Seite Nr. 2

Manual Conventions Contents Motor Brush Replacement . . . . . . . . . . . . . . . . . . 18 Manual Conventions . . . . . . . . . . . . . . . . . . . . . . . . 2 Control Board Replacement . . . . . . . . . . . . . . . . . 19 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Fuse Replacement . . . . . . . . . . . . . . . . . . . . . . . . . 21 Component Identification . . . . . . . . . . . . . . . . . . . . 5 Pressure Control Assembly Replacement . . . . . . 22 Insta

Inhaltszusammenfassung zur Seite Nr. 3

Warning Warning The following warnings are for the setup, use, grounding, maintenance and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risks. Refer back to these warnings. Additional, product-specific warnings may be found throughout the body of this manual where appli- cable. Grounding Instructions This product must be grounded. In the event of an electrical short circuit, grounding reduces the risk o

Inhaltszusammenfassung zur Seite Nr. 4

Warning WARNING FIRE AND EXPLOSION HAZARD Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent fire and explosion: � Do not spray flammable or combustible materials near an open flame or sources of ignition such as cigarettes, motors, and electrical equipment. � Paint or solvent flowing through the equipment is able to result in static electricity. Static electricity creates a risk of fire or explosion in the presence of paint or solvent fume

Inhaltszusammenfassung zur Seite Nr. 5

Warning WARNING EQUIPMENT MISUSE HAZARD Misuse can cause death or serious injury. � Always wear appropriate gloves, eye protection, and a respirator or mask when painting. � Do not operate or spray near children. Keep children away from equipment at all times. � Do not overreach or stand on an unstable support. Keep effective footing and balance at all times. � Stay alert and watch what you are doing. � Do not operate the unit when fatigued or under the influence of drugs or alcohol. � Do not ki

Inhaltszusammenfassung zur Seite Nr. 6

Component Identification Component Identification P S R U B B U K E A A E N M H F H F D J ti12008a D K J T T V Item English A Pressure Control BON/OFF switch DPower Cord E Fluid Outlet FPrime Valve HPump J Suction Hose KDrain Hose MFluid Hose NGun PTip R Guard S Trigger Safety Lock T Model/Serial Tag UFilter VPlatform 6 310824D

Inhaltszusammenfassung zur Seite Nr. 7

Installation Installation Do not use the sprayer if the electrical cord has a dam- Grounding and Electric aged ground contact. Only use an extension cord with Requirements an undamaged ground contact. WARNING Your system must be grounded. Read warnings, page 3. Recommended extension cords for use with this The sprayer cord includes: a grounding wire with an sprayer: appropriate grounding contact. 2 � 110-120V: 3-wire, 12 AWG (2.5 mm ) minimum, 300 ft. (90 m) maximum length. 2 � 240V: 3-wi

Inhaltszusammenfassung zur Seite Nr. 8

Pressure Relief Procedure Pressure Relief Procedure 3. Turn prime valve down. WARNING ti5304a Follow this Pressure Relief Procedure whenever you are instructed to relieve pressure, stop spraying, check or service equipment or install or clean spray tip. Read Injection Hazard Warning, page 3. 1. Turn OFF power and turn pressure control to lowest pressure setting. 2. Hold gun against side of grounded metal flushing If you suspect the spray tip or hose is clogged or that pail. Trigger gun to

Inhaltszusammenfassung zur Seite Nr. 9

General Repair Information General Repair Information WARNING WARNING Read Electric Shock Warning, page 3 and Burn To reduce risk of serious injury, including electric Hazard Warning, page 4. shock: � Do not touch moving or electric parts with fingers or tools while testing repair. WARNING � Unplug sprayer when power is not required for testing. � Install all covers, gaskets, screws and washers before you operate sprayer. Flammable materials spilled on hot, bare, motor could cause fire

Inhaltszusammenfassung zur Seite Nr. 10

Troubleshooting Troubleshooting WARNING Read Electric Shock Warning, page 3, Burn Hazard Warning, page 4 and Pressure Relief Procedure, page 8. What To Check What To Do Problem (If check is OK, go to next check) (When check is not OK, refer to this column) Motor Won’t Operate Basic Fluid Pressure 1. Pressure control knob setting. Slowly increase pressure setting to see if motor Motor will not run if set at mini- starts. mum (fully counter-clockwise). 2. Spray tip or fluid filter may be Reli

Inhaltszusammenfassung zur Seite Nr. 11

Troubleshooting What To Check What To Do Problem (If check is OK, go to next check) (When check is not OK, refer to this column) Basic Electrical 1. Electric supply. Meter must read Reset building circuit breaker, replace building See wiring diagram, page 100-130 VAC for 110-120 VAC fuses. Try another outlet. 28 models and 210-255 VAC for 240 VAC models. 2. Extension cord. Check extension Replace extension cord. cord continuity with volt meter. 3. Sprayer power supply cord. Replace power supp

Inhaltszusammenfassung zur Seite Nr. 12

Troubleshooting What To Check What To Do Problem (If check is OK, go to next check) (When check is not OK, refer to this column) Low Output 1. Worn spray tip. Relieve pressure, page 8. Replace tip. Refer to gun instruction manual, 309639. 2. Verify pump does not continue to Service pump. See page 14, Displacement stroke when gun trigger is Pump Replacement. released. 3. Prime valve leaking. Relieve pressure, page 8. Then repair prime valve. See page 24, Manifold Replacement. 4. Suction hose

Inhaltszusammenfassung zur Seite Nr. 13

Troubleshooting What To Check What To Do Problem (If check is OK, go to next check) (When check is not OK, refer to this column) Motor runs and pump 1. Prime Valve Open. Close prime valve. strokes 2. Paint supply. Refill and reprime pump. 3. Intake strainer clogged. Remove and clean, then reinstall. 4. Suction hose leaking air. Tighten nut. Check o-rings on swivel. 5. Intake valve ball and piston ball See Pump Manual 309250. Strain paint before are seating properly. using to remove particles t

Inhaltszusammenfassung zur Seite Nr. 14

Displacement Pump Replacement Displacement Pump Replacement See manual 309250 for pump repair instructions. 4. Cycle pump until pin (32) is in position to be removed. Removal 5. Disconnect power cord from outlet. 6. Using a flat screwdriver, push retaining spring (C) WARNING up. Push out pump pin (32). Read Injection Hazard Warning, page 3, Moving Parts Hazard Warning, page 4 and Pressure Relief Procedure, page 8. 1. Relieve pressure, page 8. C 2. Loosen two screws (30) and rotate cover (

Inhaltszusammenfassung zur Seite Nr. 15

Displacement Pump Replacement 5. Screw in pump until threads are flush with top of Installation drive housing opening. WARNING If pump pin works loose, parts could break off due to force of pumping action. Parts could project through air and result in serious injury or property damage. CAUTION If the pump jam nut loosens during operation, the threads of the drive housing will be damaged. 6. Align pump outlet (E) to back. 1. Extend pump piston rod full. Apply grease to top of pump rod at (D

Inhaltszusammenfassung zur Seite Nr. 16

Drive Housing Replacement Drive Housing Replacement Installation WARNING 1. Apply a liberal coat of grease to gears and needle bearing surfaces. Install thrust bearing (4) and gears (2) and (3) in front endbell housing. Read Injection Hazard Warning, page 3 and page 8. Needle bearing surfaces Removal 1. Relieve pressure, page 8. 3 2. Remove pump (9). Displacement Pump Replace- 4 ment, page 14. Disconnect power cord from outlet. 3 4 2 5 7 ti6121a 6 32 30 2 ti5641a 2. Push drive housing

Inhaltszusammenfassung zur Seite Nr. 17

Spin Test Spin Test See Wiring Diagram, page 28. 2. If uneven or no resistance, check for missing brush caps, broken brush springs, brush leads, and worn brushes. Repair as needed, page 19. WARNING 3. If still uneven or no resistance, replace motor, page 27. 30 Read Electric Shock Warning, page 3 and Pressure Relief Procedure, page 8. To check armature, motor winding and brush electrical continuity: 1. Relieve pressure, page 8. Disconnect power cord from outlet. 29 2. Remove two screws (30

Inhaltszusammenfassung zur Seite Nr. 18

Fan Replacement Fan Replacement Removal 3. Remove spring clip (101) on back of motor. WARNING 4. Pull off fan (100). Installation Read Electric Shock Warning, page 3 and Pressure 1. Slide new fan (100) in place on back of motor. Be Relief Procedure, page 8. sure blades of fan face motor as shown. 1. Relieve pressure, page 8. Disconnect power cord from outlet. 2. Install spring clip (101). 2. Remove two screws (30) and shroud (29). 3. Replace shroud (29) and two screws (30). 100 101 30 29 ti5

Inhaltszusammenfassung zur Seite Nr. 19

Motor Brush Replacement Motor Brush Replacement See Wiring Diagram, page 28. 2. Push each cap (A) into place over brush. Orient each cap with the 2 projections on either side of the brush lead. You will hear a “snap” when cap is Removal securely in place. Replace brushes worn to less than 1/4 in. (6mm). Brushes wear differently on each side of motor, check 3. Using a wire stripper, strip off wire insulation approx- both sides. imately 1/4 inch (6 mm) from the end of each yellow wire (C) to

Inhaltszusammenfassung zur Seite Nr. 20

Control Board Replacement Control Board Replacement See Wiring Diagram, page 28. 6. Pull control board out slightly and then slide it back and off of frame. WARNING Make sure power cord is free and NOT wrapped around cord wrap. Read Electric Shock Warning, page 3 and Pressure 7. Remove grommet and wires from strain relief. Relief Procedure, page 8. Removal 1. Relieve pressure, page 8. Disconnect power cord A from outlet. B B 2. Remove two screws (30) and shroud (29). 3. Disconnect pressu


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Graco Inc. 1095 Premium Hi-Boy Handbuch Malpistole 11
2 Graco Inc. 12004 Handbuch Malpistole 1
3 Graco Inc. 111418a Handbuch Malpistole 1
4 Graco Inc. 12004X Handbuch Malpistole 2
5 Graco Inc. 12006 Handbuch Malpistole 2
6 Graco Inc. 12005 Handbuch Malpistole 0
7 Graco Inc. 1095 Premium Hi Handbuch Malpistole 1
8 Graco Inc. 1595 HI Handbuch Malpistole 3
9 Graco Inc. 207-945 Handbuch Malpistole 7
10 Graco Inc. 1595 Premium Hi Handbuch Malpistole 2
11 Graco Inc. 208-748 Handbuch Malpistole 0
12 Graco Inc. 208-749 Handbuch Malpistole 1
13 Graco Inc. 1595 Premium Hi-Boy Handbuch Malpistole 6
14 Graco Inc. 208-644 Handbuch Malpistole 1
15 Graco Inc. 218-026 Handbuch Malpistole 2
16 3M Series 52 Handbuch Malpistole 1
17 3M Series 56 Handbuch Malpistole 0
18 3M Series 56ZZ Handbuch Malpistole 1
19 3M Series 55ZZ Handbuch Malpistole 1
20 3M Series 57 Handbuch Malpistole 1