Inhaltszusammenfassung zur Seite Nr. 1
Instruction Manual
Before Use
Precautions ...................................... 1
Scale Components ............................ 2
UC-321PBT/UC-321PBT-G Display Symbols................................ 3
Installing (or Replacing) Batteries ........ 3
Precision Health Scale
Operations
Normal Measurement ........................ 4
Measuring weight on a carpet ............ 6
References
Specifications .................................... 7
Maintaining the Scale......................... 7
How the Wir
Inhaltszusammenfassung zur Seite Nr. 2
Scale Components Display Back Ready/Complete Symbol Low Battery Mark Slide Mode Front Measurement Switch Battery Compartment The following measurements can be selected by the slide switch and are clas- sified into two categories - WEIGHT A and WEIGHT B. Within WEIGHT A and WEIGHT B, you have a choice to select and have your weight displayed in kg or lb. The difference between WEIGHT A and WEIGHT B is the speed of communication from the data port to another device (e.g. modem, printer, telephone)
Inhaltszusammenfassung zur Seite Nr. 3
Display Symbols Ready/Complete symbol. This symbol is displayed when the measure- ment display is stable. Low battery mark. If this mark is displayed, replace the batteries with new ones. Installing (or Replacing) Batteries Caution Insert the battery with the positive (+) and negative (-) terminals properly aligned with the corresponding symbols in the battery compartment. Improper installation of the batteries may cause battery leakage. Replace all four batteries with new ones, when symbol is
Inhaltszusammenfassung zur Seite Nr. 4
Normal Measurement Measuring Your Weight 1 Set the slide switch to the correct mode. Example: Set the slide switch to “WEIGHT B”. 2 Press the measurement switch gently. All display segments are visible for several sec- onds. 3 Wait until the symbol is displayed. Wait until the display 0.0 kg /0.0 lb and Ready/ Complete symbol are displayed. 4 Step on the scale gently and stand during measurement. You will see the display changed to dashes. Please stay still as much as you can. 5 Your weig
Inhaltszusammenfassung zur Seite Nr. 5
Measuring an Infant or Small Animal 1 Set the slide switch to the correct mode. Example: Set the mode switch to “WEIGHT B”. 2 Press the measurement switch gently and step on your scale. All display segments are indicated for sev- eral seconds. Step on the scale without any baby or animal in your hands before display- ing 0.0 kg /0.0 lb. 3 Have infant or animal placed Stay on the scale and have the infant or animal placed securely in your arms within ten seconds after the scale is displaying 0
Inhaltszusammenfassung zur Seite Nr. 6
Measuring weight on a carpet It is recommended that the scale be used on a solid level surface, such as tile, wood, or laminate flooring. If the scale must be used on a carpet, be sure to attach the plastic feet. How to insert the add-on feet There are two pins on each add-on foot side. Match those pins to the holes on the scale leg and insert firmly. Make sure to put add-ons to all 4 legs. Notes 1 Please be careful not to fall when using the add-on feet. 2 We recommend using this scale on fir
Inhaltszusammenfassung zur Seite Nr. 7
Specifications UC-321PBT Digital display Liquid crystal display, 25 mm character height Maximum capacity 200 kg / 450 lb Minimum display 0.1 kg / 0.2 lb Wireless communication WML-30AH (Mitsumi Electronics Co. Ltd.) Power source Four type AA batteries (R6P, 1.5 volt x 4, not included) Battery life Approximately 1000 measurements Accessories Add-on feet (4), Instruction manual Specifications are subject to change without prior notice and any obligation on the part of the manufacturer. Compliance
Inhaltszusammenfassung zur Seite Nr. 8
How the Wireless Connection Works At the end of the measurement, your weight will be sent automatically to your health monitoring device. You do not need to do anything. If the health moni- toring device is not working or is not within range of the scale, the weight will be stored in the scale's memory (up to 40 sets). Before Requesting Service Cause / Problem Corrective Action Nothing is displayed by pressing Check the battery installation. the measurement switch. Replace with four new batteri
