Bedienungsanleitung Honeywell DC4

Bedienungsanleitung für das Gerät Honeywell DC4

Gerät: Honeywell DC4
Kategorie: Wasserpumpe
Produzent: Honeywell
Größe: 1.01 MB
Datum des Hinzufügens: 9/15/2013
Seitenanzahl: 46
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Honeywell DC4 zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Honeywell DC4 finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Honeywell DC4 auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Honeywell DC4 im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Honeywell DC4 auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Honeywell DC4 Handbuch - Online PDF
Advertisement
« Page 1 of 46 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Honeywell DC4 Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Honeywell DC4 befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1




®


Installation, Operation, &
Maintenance Instruction


Models DC2, 3, 4, 5, and 6























Bulletin #: IOM-OM-1104- E

STANDARD PUMP OPERATIONS
27101 Airport Road
Punta Gorda, FL 33982


(941) 575-3800 Fax (941) 575-4085

Manufacturers of Quality Pumps,
www.pulsatron.com
Controls, and Systems

Inhaltszusammenfassung zur Seite Nr. 2

Pulsafeeder Factory Service Policy Should you experience a problem with your Pulsafeeder pump, first consult the troubleshooting guide in your operation and maintenance manual. If the problem is not covered or cannot be solved, please contact your local Pulsafeeder Sales Representative or Distributor, or our Technical Services Department for further assistance. Trained technicians are available to diagnose your problem and arrange a solution. Solutions may include purchase of replaceme

Inhaltszusammenfassung zur Seite Nr. 3

Table of Contents 1. INTRODUCTION .....................................................................................................................................1 2. PRINCIPLES OF OPERATION ..................................................................................................................1 2.1 Reagent Head Assembly ........................................................................................................2 2.2 Control Assembly..............................

Inhaltszusammenfassung zur Seite Nr. 4

8.3 KOPkit numbers by model: ....................................................................................................20 9. MODEL NUMBER IDENTIFICATION...........................................................................................................21 10. WET END MATERIALS REFERENCE........................................................................................................22 11. TROUBLESHOOTING....................................................................

Inhaltszusammenfassung zur Seite Nr. 5

1. Introduction ® The OMNI metering pump is positive displacement, mechanically operated reciprocating diaphragm pump. Each pump consists of a power end and a process end separated by a PTFE faced diaphragm. Individual pumps will vary in appearance due to various liquid ends and accessories; however, the basic principles of operation remain the same. 2. Principles Of Operation Figure 1, reagent head operation A diaphragm reciprocates at a preset stroke length, displacing an

Inhaltszusammenfassung zur Seite Nr. 6

2.1 Reagent Head Assembly The typical reagent head assembly consists of reagent head, diaphragm, and suction and discharge cartridge check valves. This assembly is the only part of the pump to contact the process liquid; consequently, maintenance is critical to pump performance. 2.2 Control Assembly ® The OMNI pump incorporates a lost motion style of stroke length adjustment to limit diaphragm travel during the suction portion of each stroke. The stroke length setting is indicated by a

Inhaltszusammenfassung zur Seite Nr. 7

3. Equipment Inspection Check all equipment for completeness against the order and for any evidence of shipping damage. Shortages or damage must be reported immediately to the carrier and your authorized representative or ® distributor of OMNI pumps. 4. Storage 4.1.1 Short Term ® Storage of your OMNI pump for up to 12 months is considered short-term. The recommended short-term storage procedures are: a) Store the pump indoors at room temperature in a dry environment. b) If requi

Inhaltszusammenfassung zur Seite Nr. 8

5.2 Piping System 1. All systems should include a pressure relief valve on the discharge side, to protect piping and process equipment, including the pump, from excess process pressures. An external relief valve is required! There should be no devices capable of restricting flow (such as a valve) located between the pump and the relief device. 2. Shutoff valves and unions (or flanges) on suction and discharge piping are recommended. This permits check valve inspection without draining

Inhaltszusammenfassung zur Seite Nr. 9

5.3 Suction Pressure Requirements ® Although OMNI metering pumps have some suction lift capability, a flooded suction (i.e., suction pressure higher than atmospheric pressure) is preferable whenever possible. The pump should be located as close as possible to the suction side reservoir or fluid supply source. For fluid with a vapor pressure of 5 psia or less (at operating temperature) the wet suction lift capability is approximately ten (10) feet. If this requirement is not met, the pump

Inhaltszusammenfassung zur Seite Nr. 10

6. Equipment Startup 6.1 Fastener Inspection All pump fasteners should be checked prior to pump operation, and occasionally during use. This would include reagent head mounting bolts, motor mounting bolts, and the hardware that secures the pump to its foundation. Most hardware can be checked simply to ensure it is not loose. However, utilize the following values when checking reagent head bolt torque: Reagent Head Bolt Torque Model Material # Bolts and size N-m In. - Lbs Plastic (4

Inhaltszusammenfassung zur Seite Nr. 11

6.3 Priming the Reagent Head 1. When handling process liquids, follow all applicable personal and facility safety guidelines. 2. Ensure that the pump is ready for operation and that all process connections are secure. 3. Open the suction and discharge line shutoff valves. 4. If the piping system design and the storage tank are such that the product flows due to gravity through the pump, reduce the discharge pressure and the system will self prime when the pump is started. In the event

Inhaltszusammenfassung zur Seite Nr. 12

6.4 Calibration Figure 6, sample flow calibration curve All metering pumps must be calibrated to accurately specify stroke length settings for required flow rates. A typical calibration chart is shown above. Although output is linear with respect to stroke length setting, an increase in discharge pressure decreases output uniformly, describing a series of parallel lines, one for each pressure (only two are shown). The theoretical output flow rate at atmospheric discharge pressure is bas

Inhaltszusammenfassung zur Seite Nr. 13

7. Maintenance BEFORE PERFORMING ANY MAINTENANCE REQUIRING REAGENT HEAD OR VALVE (WET END) DISASSEMBLY, BE SURE TO RELIEVE PRESSURE FROM THE PIPING SYSTEM AND, WHERE HAZARDOUS PROCESS MATERIALS ARE INVOLVED, RENDER THE PUMP SAFE TO PERSONNEL AND THE ENVIRONMENT BY CLEANING AND CHEMICALLY NEUTRALIZING AS APPROPRIATE. WEAR PROTECTIVE CLOTHING AND EQUIPMENT AS APPROPRIATE. Accurate records from the early stages of pump operation will indicate the type and levels of required maintenance.

Inhaltszusammenfassung zur Seite Nr. 14

7.2 Wet End Removal, Inspection, & Reinstallation IF THE DIAPHRAGM HAS FAILED, PROCESS FLUID MAY HAVE CONTAMINATED THE PUMP ECCENTRIC HOUSING (ALTHOUGH NORMALLY, ANY PROCESS FLUID BEHIND A FAILED DIAPHRAGM WOULD PASS THROUGH THE BOTTOM DRAIN HOLE). HANDLE WITH APPROPRIATE CARE. Figure 8, wet end components ® OMNI diaphragms do not have a specific cycle life; however, the accumulation of foreign material or debris sufficient to deform the diaphragm can eventually cause failure.

Inhaltszusammenfassung zur Seite Nr. 15

7.2.1 Diaphragm Removal & Reinstallation 1. Adjust the stroke setting to 50% and disconnect the power source to the drive motor. 2. Relieve all pressure from the piping system. Take all precautions described under the WARNING on page 9, Section 7 to prevent environmental damage and exposure of personnel to hazardous materials. 3. Close the inlet and outlet shutoff valves. 4. Place a pan underneath the pump head adaptor to catch any liquid leakage. 5. Disconnect piping to the reagen

Inhaltszusammenfassung zur Seite Nr. 16

7.3 Check Valves 7.3.1 General Description Most fluid metering problems are related to check valves. Problems usually stem from solids accumulation between valve and seat, corrosion of seating surfaces, erosion, or physical damage due to wear or the presence of foreign objects. The valve incorporates a ball, guide, and seat. Flow in the unchecked direction lifts the ball off the seat, allowing liquid to pass through the guide. Reverse flow forces the ball down, sealing it against the s

Inhaltszusammenfassung zur Seite Nr. 17

Check Valve Suction Position Check Valve Discharge Position Figure 10, check valves, DC3 and DC 4 Check Valve Suction Position Check Valve Discharge Position Figure 11, check valves, DC5 and DC6 plastic construction 13

Inhaltszusammenfassung zur Seite Nr. 18

7.3.2 Check Valve Removal & Reinstallation, Cartridge type Valving that is of the cartridge design is intended to be replaced as an assembly. 15. Disconnect the power source to the drive motor. 16. Relieve all pressure from the piping system. 17. Take all precautions necessary to prevent contamination to the environment and personnel exposure to hazardous materials. 18. Close the inlet and outlet shutoff valves. 19. Disconnect the suction piping at the installed union near the suction

Inhaltszusammenfassung zur Seite Nr. 19

Inserting the check valve assmbly into the pump in the wrong directiom, or having the check seat upside down, will prevent proper seals at the o-rings, decrease pump performance, and can cause damage to the diaphragm. 12. Carefully make sure that the check assemblies are in proper position, and tighten the four tie-bar bolts, using a star pattern, to a torque of 6 Ft-lbs (8 N-m). 13. Retighten any unions, flanges, or other process connections that may have been loosened previously.

Inhaltszusammenfassung zur Seite Nr. 20

7.4 Motor Removal & Reinstallation 1. Disconnect the power source to the drive motor. 2. Disconnect the motor wiring from the motor. 3. Remove the four bolts retaining the motor to the motor adaptor. The motor shaft fits into a bore on the pump input shaft. 4. Slide the motor shaft out of the pump input shaft. Be careful not to lift the pump input shaft up out of the pump. 5. Apply a lubricant such as Loctite™ Silver Grade® Anti-seize paste (or similar) to the motor shaft and key befor


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Honeywell DC2 Handbuch Wasserpumpe 2
2 Honeywell S8660 Handbuch Wasserpumpe 2
3 Honeywell S8610 Handbuch Wasserpumpe 13
4 Honeywell DC3 Handbuch Wasserpumpe 0
5 Honeywell DC6 Handbuch Wasserpumpe 1
6 Honeywell S8670 Handbuch Wasserpumpe 1
7 Honeywell DC5 Handbuch Wasserpumpe 3
8 Honeywell S8600 Handbuch Wasserpumpe 5
9 Edelbrock 25-4066 Handbuch Wasserpumpe 0
10 A.O. Smith Century Pool & Spa Motor Handbuch Wasserpumpe 156
11 Agilent Technologies Quaternary Pump 1100 Series Handbuch Wasserpumpe 33
12 Aero Mist 50 Series Handbuch Wasserpumpe 0
13 Amtrol GUARDIAN CP DC2 Handbuch Wasserpumpe 3
14 Aqua Flo A Series Handbuch Wasserpumpe 12
15 Annovi Reverberi RKA 1750 rpm N Version Handbuch Wasserpumpe 60