Inhaltszusammenfassung zur Seite Nr. 1
motorola H525
Quick Start Guide
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
your headset your headset Take a moment to familiarize yourself with your new H525 Headset. Earhook Ear Speaker Charging Port Indicator Light Volume Buttons Microphone Call Button Power Switch 1
Inhaltszusammenfassung zur Seite Nr. 4
charge it charge it You’ll need to charge your headset overnight before using it. Plug the charger into the charging port on your headset and a wall outlet. The indicator light is red or purple while the battery is charging. When the battery is fully charged, the indicator light turns blue. Note: Before first time use, leave headset charging overnight. Note: Headset is not functional while charging. Note: Your battery is designed to last the life of your product. It should only be removed
Inhaltszusammenfassung zur Seite Nr. 5
pair & connect pair & connect pair & connect Let’s get your headset paired and connected to your Bluetooth phone. 1 Turn off any Bluetooth devices previously paired with your headset. 2 Turn on the Bluetooth feature on your phone. 3 Turn on your headset (see page 8 for help). The indicator light becomes steadily lit in blue. 4 Set your phone to search for Bluetooth devices. 5 Select Motorola H525 from the search results on your phone. 6 Select Ok or Yes to pair your headset with your phon
Inhaltszusammenfassung zur Seite Nr. 6
pair & connect reconnect After initially pairing and connecting your phone and headset, you don’t need to do it again. For daily use, make sure your headset is turned on, and your phone’s Bluetooth feature is on. Your headset and phone will connect automatically! test your connection 1 Place the headset over your ear. 2 On the phone, dial a number and press Call/Send key. If your phone and headset are successfully connected, you hear ringing on the headset. 4
Inhaltszusammenfassung zur Seite Nr. 7
put it on put it on choose an ear Your headset comes ready for your right ear. To change the headset for your left ear: 1 2 From Right Ear To Left Ear 5
Inhaltszusammenfassung zur Seite Nr. 8
put it on set volume buttons 1 Turn the headset power off. 2 Press and hold the Volume button you want to assign as the "volume up" button and slide the Power switch on. The indicator light flashes blue three times. When connected, it will flash blue/purple. Volume Buttons Indicator Light 6
Inhaltszusammenfassung zur Seite Nr. 9
put it on wear it Flex the ear hook and loop it over your ear. 7
Inhaltszusammenfassung zur Seite Nr. 10
turn on & off turn on & off turn on Slide the Power switch to the on position (no red is shown under the switch). The indicator light flashes blue three times, then flashes in blue and purple (if connected with a device) or is steadily blue (if ready to be paired). turn off Slide the Power switch to the off position (red is shown under switch). The indicator light flashes three times then turns off. 8
Inhaltszusammenfassung zur Seite Nr. 11
battery check battery check Press and hold both Volume buttons while not on a call. indicator light available talk time red less than 1.5 hours purple between 1.5 to 3.5 hours blue up to 5 hours To save battery power, turn off the headset when you don't use it for an extended time. 9
Inhaltszusammenfassung zur Seite Nr. 12
calls calls To... answer call Press the Call button. mute or unmute a call Press both Volume buttons. reject call Press and hold a Volume button until you hear a tone. end a call Press the Call button. redial last call Press and hold the Call button until you hear two tones. make a voice dial call Press the Call button and wait for voice prompt. answer or reject Use phone to answer/reject second incoming call second call (follow your phone’s instructions) Note: Your H525 supports both Hand
Inhaltszusammenfassung zur Seite Nr. 13
status indicators status indicators indicator light (with charger plugged in) headset indicator headset status red charging (battery level less than 50% charge) purple charging (battery level more than 50% charge) blue charging complete 11
Inhaltszusammenfassung zur Seite Nr. 14
status indicators indicator light (with charger not plugged in) headset indicator headset status off power off three blue flashes powering on/off steady blue pairing/connect mode rapid blue/purple flashes connection successful quick blue flash incoming/outgoing call slow blue pulse connected (on a call) slow blue flash standby (not on a call) slow red flash idle (not connected to a phone) slow purple pulse connected (call muted) steady red attempting to connect quick red flash low battery Not
Inhaltszusammenfassung zur Seite Nr. 15
status indicators audio tones audio tone headset status ascending tone powering on two descending tones powering off ring tone incoming call two short tones when volume at maximum or pressing Volume minimum button high/low tones low battery repeated every 60 seconds no audio indications; out of range deteriorating quality three ascending tones connected to phone two rapid ascending mute enabled tones two rapid descending mute disabled tones low tone every mute reminder 10 seconds 13
Inhaltszusammenfassung zur Seite Nr. 16
restore headset restore headset Caution: This action erases all pairing information stored in your headset. To restore your headset to original factory settings, with the headset turned on, press and hold both Volume buttons and Call button for 10 seconds until the indicator light is steady blue. 14
Inhaltszusammenfassung zur Seite Nr. 17
troubleshooting troubleshooting My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is not steadily lit in blue, turn off both the other device and headset, wait 10 seconds, then turn headset back on. Wait for the indicator light to become steadily lit in blue, indicating the headset is now in pairing mode. My phone doesn't find my headset. Make sure the indicator light on your headset is on (lit in bl
Inhaltszusammenfassung zur Seite Nr. 18
Safety & General Information Safety Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. Approved Accessories Use of accessories not approved by Motorola, including but not limited to batteries, antennas, and convertible covers, may cause your mobile device to exceed RF energy exposure guidelines and may void your mobile device’s warranty. For a list of approved Motorola accessories, visit our Web site at: www.motorola.com Batteri
Inhaltszusammenfassung zur Seite Nr. 19
• Storing your fully charged accessory in high-temperature conditions may permanently reduce the life of the internal battery. • Battery life may temporarily shorten in low-temperature conditions. Caution About High Volume Usage Warning: Exposure to loud noise from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the volume sound level, the less time is required before your hearing could be affected. Hearing damage from loud noise is some
Inhaltszusammenfassung zur Seite Nr. 20
Industry Canada Notice to Users Industry Canada Notice Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device. See RSS-GEN 7.1.5. FCC Notice to Users FCC Notice The following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC-ID:xxxxxx on the
