Inhaltszusammenfassung zur Seite Nr. 1
MOTOROLA T225
Inhaltszusammenfassung zur Seite Nr. 2
Inhaltszusammenfassung zur Seite Nr. 3
Congratulations The Motorola T225 car speakerphone delivers handsfree conversation in a sleek design. The speakerphone is perfect for receiving and making calls wirelessly via Bluetooth® from your phone. • Drive safely with wireless control of phone calls. • Simultaneously connect with two phones. • Hear voice prompts for calls, battery level, and other functions. We’ve crammed all of the main features of your speakerphone into this handy guide, and in a matter of minutes we’ll show you ju
Inhaltszusammenfassung zur Seite Nr. 4
Your speakerphone the important parts Volume Volume Microphone Down Up Mute Light Power Mute MicroUSB Charging Connector Speaker Status Call Light 2 Your speakerphone
Inhaltszusammenfassung zur Seite Nr. 5
Charge it let’s get you up and running Battery Charge Status Red, Purple = charging Blue= fully charged You can use your speakerphone while unplugged or plugged into the charger. Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your speakerphone. Charge it 3
Inhaltszusammenfassung zur Seite Nr. 6
Basics a few essentials to get your started Install it Turn it on & off OFF ON 4 Basics
Inhaltszusammenfassung zur Seite Nr. 7
Voice prompts Voice prompts help you pair and connect, make and answer calls, and check your battery level. Note: The voice prompts are only in English. Basics 5
Inhaltszusammenfassung zur Seite Nr. 8
Pair & connect connect and go Note: The voice prompts are only in English. Pair & connect with your phone 1 Turn off any Bluetooth devices previously paired with your speakerphone. 2 Turn on the Bluetooth feature on your phone. 3 Turn on your speakerphone (see “Turn it on & off” on page 4). The status light becomes steady blue to indicate the speakerphone is in discoverable mode and you hear “ready to pair”. 4 Follow the voice prompts to connect your phone to your speakerphone. Note: If
Inhaltszusammenfassung zur Seite Nr. 9
Pair & connect a second phone 1 Turn off the first phone and any other Bluetooth devices previously paired with your speakerphone. 2 Turn your speakerphone off. 3 Turn on the Bluetooth feature on your phone. 4 Turn on your speakerphone. The status light becomes steady in blue and you hear “ready to pair”. 5 Follow the voice prompts to connect your phone to your speakerphone. Note: If prompted for the passkey, enter 0000. When your speakerphone successfully pairs with your phone, the statu
Inhaltszusammenfassung zur Seite Nr. 10
Calls it’s good to talk Note: Some features are phone/network dependent. To... answer call Press Call . ignore call Press and hold Volume Up or Volume Down until you hear a tone. make a voice Press Call and follow prompts. dial call redial last call Press and hold Call until you hear a tone and follow prompts. mute or Press Mute and you hear unmute a call “mute on” or “mute off”. The mute light is solid red while muted. answer Press Call . Current call is second placed on hold. incomi
Inhaltszusammenfassung zur Seite Nr. 11
Talk time check your chat time Press both Volume buttons while not on a call. if light you hear... shows... red “battery is low” purple “battery is medium” blue “battery is high” To save battery power, turn off the speakerphone when not using it for an extended time. Note: The voice prompts are only in English. Talk time 9
Inhaltszusammenfassung zur Seite Nr. 12
Status light know your speakerphone If status light your speakerphone is... shows... three blue flashes powering on steady blue in pairing/connect mode rapid blue/purple connected to your phone flashes quick blue flash receiving a call on phone 1, or making a call on either phone quick purple flash receiving a call on phone 2 slow blue pulse on a call slow blue flash in standby (not on a call—connected to one phone) slow purple flash in standby (not on a call—connected to two phones) 10 St
Inhaltszusammenfassung zur Seite Nr. 13
If status light your speakerphone is... shows... slow red flash idle (not connected to a phone) steady red (status trying to connect to your light) phone steady red (mute muted light) slow red pulse in a low battery state Note: The status light stops flashing to conserve power after 20 minutes on a call or of inactivity, but the speakerphone remains on. Status light 11
Inhaltszusammenfassung zur Seite Nr. 14
Settings make some changes Turn voice prompts on & off With the speakerphone turned on and not on a call, press and hold either Volume button and the Call button until you hear “voice instructions on” or “voice instructions off”. Note: The voice prompts are only in English. Reset Caution: This action erases all pairing information stored in your speakerphone. With your speakerphone turned on, press and hold Call , Volume Up , and Volume Down buttons until the mute and status lights be
Inhaltszusammenfassung zur Seite Nr. 15
Problems? we’ve got solutions My speakerphone will not enter pairing mode Make sure that any devices previously paired with the speakerphone are turned off. If the status light is not steady in blue, first turn off the other device, then turn the speakerphone off and on. The status light becomes steady in blue and you hear “ready to pair”. My phone doesn't find my speakerphone when searching Make sure the status light on your speakerphone is steady in blue when your phone is searching for
Inhaltszusammenfassung zur Seite Nr. 16
Support If you have questions or need assistance, we’re here to help. Go to www.motorola.com/bluetoothsupport or www.motorola.pairxusa.com, or contact us at 1877MOTOBLU. You can also contact the Motorola Customer Support Center at: 18003316456 (United States), 18883906456 (TTY/TDD United States for hearing impaired), or 18004614575 (Canada). 14 Support
Inhaltszusammenfassung zur Seite Nr. 17
Safety, Regulatory & Legal Safety & General Information Safety Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE. Use & Safety for Battery-Powered Accessories • Do not store or use your battery-powered accessory (such as a Bluetooth® headset or other device) in temperatures below -10°C (14°F) or above 60°C (140°F). • Do not recharge your accessory in temperatures below 0°C (32°F) or above 45°C (113°F). • Conditions inside a park
Inhaltszusammenfassung zur Seite Nr. 18
• Enter or review written data. • Surf the web. • Input navigation information. • Perform any other functions that divert your attention from driving. While driving, ALWAYS: • Keep your eyes on the road. • Use a handsfree device if available or required by law in your area. • Enter destination information into a navigation device before driving. • Use voice activated features (such as voice dial) and speaking features (such as audible directions), if available. • Obey all local laws and regulat
Inhaltszusammenfassung zur Seite Nr. 19
• A choking hazard may exist for small, detachable parts. • Improper use could result in loud sounds, possibly causing hearing injury. • Improperly handled batteries could overheat and cause a burn. Symbol Key Your battery, charger, or mobile device may contain symbols, defined as follows: Symbol Definition 032374o Important safety information follows. Do not dispose of your battery or mobile device in a fire. 032376o Do not dispose of your battery or product with your household waste. See “Rec
Inhaltszusammenfassung zur Seite Nr. 20
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferen
