Inhaltszusammenfassung zur Seite Nr. 1
Double-drive Automatic Washing Machine
User's manual
This manual is for
XQS70-98
Please read this manual carefully
before using.
Retain it for future reference.
Inhaltszusammenfassung zur Seite Nr. 2
Contents Names of the parts...................................................1 Safety precautions................................................... 2 Installation and adjustment.......................................4 Install the water inlet hose........................................6 Preparation before washing......................................8 Put in the laundries...................................................9 Use of the detergent................................................9 U
Inhaltszusammenfassung zur Seite Nr. 3
Names of the parts Top lid components Rear faceplate Water absorption Water inlet valve Inner cover components cushion Detergent box Control panel seat Power cord Outer tub cover Balance ring Attachment block 3 pieces Inner tub Draining hose hanging hole Lint filter Pulsator Control panel coating Cabinet Handle Liquid blenching filler Drain hose Back cover Adjustable leg The figure in this manual being sketch map and with the improvement of our products, the machine you buy is like to be di
Inhaltszusammenfassung zur Seite Nr. 4
Safety precautions The washing machine must be positioned Please plug the power plug on special so that the plug is accessible. Be sure to pull the receptacle. Be sure to use three-pins plug off and close the water faucet in power receptacle. Ensure that the earthing following cases: power failure, delivering prong of the power receptacle is earthed the machine, setting the machine idle or reliably. Use leakage protector if possible. cleaning the machine. Do not plug or pull t
Inhaltszusammenfassung zur Seite Nr. 5
Do not decompose, repair or alter the machine Do not stretch hands into the working machine. by yourself. It is dangerous even if the rotation is slow. Take special care of the children. Do not wash laundries with volatile materials Do not put any hot or heavy items (such as the kettle (such as thinner, petrol etc.). with hot water) on the washing machine Benzene The appliance is not instruct for use of Keep the machine away from direct sunlight and young children of infirm persons without
Inhaltszusammenfassung zur Seite Nr. 6
Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the inner cover components 1.Open the top lid of the washing machine. 2.Put the inner cover component on the outer tub cover, aiming Outer tub cover the inner cover shaft to the installation hole of the corresponding shaft groove outer tub cover shaft groove. Inner cover shaft 3.Firstly insert the inner cover shaft of I
Inhaltszusammenfassung zur Seite Nr. 7
How to change the direction of the drain hose 1.Lean the machine down gently with the front 3.Extend the drain hose from the right side. Push the surface facing the ground. Loosen the eight drain hose into the groove with hands. screws by a cross screwdriver. Back Bottom plate Front Soft item 2.Pull out the drain hose from the groove at the left side. Use groove at this side after 4.Install the bottom plate (as per indicated before), direction changing then lift the machine up g
Inhaltszusammenfassung zur Seite Nr. 8
Install the water inlet hose Confirm the water faucet water faucet, suitable water faucet, not suitable The exit end face of the faucet It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. Connection between the water inlet hose jointerand the water faucet 1.Press the lower end of the lock lever and
Inhaltszusammenfassung zur Seite Nr. 9
Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the nut of the water inlet hose cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer. 3 Fasten the nut. Swing it gently to confirm if it's suitable. jointer of the water inlet valve water absorption cushion. Connection between the jointer of the water inle
Inhaltszusammenfassung zur Seite Nr. 10
1 Preparation before washing Preparation before washing 1.Connect the water inlet hose. Open the water faucet. 2.Confirm that the washing machine is earthed reliably. Then insert the power plug into the receptacle. The earth terminal shall not link to gas pipeline and faucet water pipeline. 3.Put down the drain hose. Pay attention to following before washing Check if Clear the Tie the long The quantity of When the pulsator Pay attention to followings before washing the laundries the laundr
Inhaltszusammenfassung zur Seite Nr. 11
2 Put in the laundries The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can be washed or spinning in one time. One time washing quantity shall be lower than the rated capacity. The thickness, size, type of the cloth will influence the actual washing capacity. It is suitable for one time washing to put in reasonable amount of laundries and the laundries can be turned round in washing. Do not select above 4
Inhaltszusammenfassung zur Seite Nr. 12
4 Use the operation buttons Description of the function of the buttons Digital tube Mode and meaning of the VFD indicator During sensing, it displays Flashing indicating the running program During operation of programs, it displays the remained time (minute) or remained times of On indicating the program about to run or the selection mode the corresponding procedure The digital tube corresponding to the running program lights. Minutes Minutes Times Minutes RINSE button SOAK button WASH button SP
Inhaltszusammenfassung zur Seite Nr. 13
Start/Pause button WATER LEVEL button RERSERVE button PROGRAM selection button Child lock function This function is used to protect the children and prevent them from changing the washing procedure. Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/OFF button. The digitron displays CL . You can continue setting desired washing procedures. After setting, push down the START/PAUSE button. The child lock function is activated.All of the buttons are locked and
Inhaltszusammenfassung zur Seite Nr. 14
Steps of using the operation buttons and description of the steps Time remained(minutes) NORMAL Minutes Times Minutes Minutes COTTON QUICK WOOLLEN POSTHASTE Reserve(hours later) SILK JEANS POWER START ON/OFF PAUSE PROGRAM WATER RESERVE LEVEL Push the "POWER ON/OFF " button to switch on the power. POWER ON/OFF Push the "PROGRAM"button to select suitable automatic program. 2 PROGRAM After switching on the power, the machine will set normal program automatically. To select other automatic program
Inhaltszusammenfassung zur Seite Nr. 15
After switching on the power, the washing machine will set to common program including"wash, rinse, spin "automatically. To select other procedures, push the " SOAK"," WASH", " RINSE" or "SPIN" button to select the time of soak,wash and spin, and the times of rinse. After switching on the power, if you push one of the button among "WASH", "RINSE"and"SPIN", the digitron of the former procedures will turn off automatically. The former procedures will not run. For instance: after s
Inhaltszusammenfassung zur Seite Nr. 16
* Total time: including the normal water inlet time and drain time. The total washing time may be influenced by the water inlet pressure and water level. * Spin time: From the moment the intermittent spinning starts to the moment it stops running (the time displayed on spin digitron is from intermittent spinning to the moment before inertia spinning; the time displayed on the time remain digitron is the total remained time) * In selecting "posthaste" program, the washing mac
Inhaltszusammenfassung zur Seite Nr. 17
7.Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box and set it on The lint filter must be used during washing. the control panel seat. It must be cleaned in time after each using 1.The method of dismantle : Push it up aslant and gently. 2.The method of install : install it upwards and a
Inhaltszusammenfassung zur Seite Nr. 18
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason How to settle Close the top lid. The top lid is
Inhaltszusammenfassung zur Seite Nr. 19
Packing list Quantity Name User's manual One Inner cover components One Component of the water inlet hose One The end connecting to the washing machine Jointer connecting the water inlet hose and the water faucet The end connecting to the water inlet hose jointer One Bottom cover Topping screws Eight Full automatic washing machine One Specification Water level/Water 1/18L 2/24L 3/30L 4/36L 5/42L 6/48L 7/54L 8/60L 9/66L 10/70L quantity (about) Water Injection pressure 0.03MPa 0.78MPa Rated wa
