Bedienungsanleitung Invacare 1036794

Inhaltszusammenfassung zur Seite Nr. 1


 
 
 
     


    
FRONT ARMREST SOCKET
SAVE THESE INSTRUCTIONS
REPLACEMENT/H-BLOCK
NOTE: Check all parts for shipping damage before us-
INSTALLATION (FIGURE 1)
ing. In case of damage, DO NOT use the equipment.
Contact the Dealer/Carrier for further instructions.
1. Remove the locknut and screw securing the H-block
to the right and left front frames (FIGURE 1).
SAFETY

Inhaltszusammenfassung zur Seite Nr. 2

3. Position the armrest spacer flush against the inside REAR ARMREST SOCKET of the outside armrest bracket as shown in “DETAIL INSTALLATION ON WHEELCHAIRS A”, FIGURE 2. BUILT BEFORE 7/00 4. Place the armrest socket into the groove of the arm- rest spacer. Space Saver Armrest Sockets (FIGURE 2) 5. Position inside armrest bracket against the armrest Space Saver Kit No. 1036793 Includes the following: socket (FIGURE 2). DESCRIPTION QTY. 6. Loosely secure the brackets, armrest socket and arm- Left O

Inhaltszusammenfassung zur Seite Nr. 3

Conventional Armrest Sockets (FIGURE 3) 4. Place the armrest socket into the groove of the arm- rest spacer. Conventional Kit No. 1036794 includes the following: 5. Position the bracket spacer flush against the inside of DESCRIPTION QTY. the outside armrest bracket. Left Outside Armrest Bracket 1 6. Position inside armrest bracket against the bracket spacer . Left Inside Armrest Bracket 1 Left Armrest Spacer 1 7. Loosely secure the brackets, armrest socket, armrest Right Outside Armrest Bracket

Inhaltszusammenfassung zur Seite Nr. 4

2. Install armrest bracket onto wheelchair frame and REAR ARMREST SOCKET secure using short hex screw and locknut. Securely INSTALLATION ON WHEELCHAIRS tighten. BUILT AFTER 7/00 3. Insert the tube support into the armrest socket ensur- ing that the holes in the tube support align with the Space Saver Armrest Sockets (FIGURE 4) holes in the armrest socket. Space Saver Kit No. 1094952 includes the following: 4. Install the armrest socket into the armrest bracket. DESCRIPTION QTY. NOTE: Mounting ha

Inhaltszusammenfassung zur Seite Nr. 5

Conventional Armrest Sockets (FIGURE 5) 1. Position armrest bracket into mounting position. Re- fer to Owner’s Manual for proper mounting positions. Conventional Kit No. 1094953 includes the following: 2. Install armrest bracket onto wheelchair frame and DESCRIPTION QTY. secure using short hex screw and locknut. Armrest Bracket 2 3. Insert the tube support into the armrest socket ensur- Bracket Spacer 2 ing that the holes in the tube support align with the Front Armrest Socket 2 holes in the arm

Inhaltszusammenfassung zur Seite Nr. 6

Swing-Away Armrest (FIGURE 7) ARMREST OPERATION SWINGING AWAY. CAUTION 1. Unlock the arm by rotating the release lever(s) towards the outside of the chair. After any adjustments, make sure the lock- ing mechanism is secured before using the 2. Pull the front of arm straight up/out of the socket and wheelchair. towards the rear of the chair. 3. To lock, push the arm towards the front of the chair; Adjustable Height Armrest (FIGURE 6) then downward and into the socket (unlocked). HEIGHT ADJUSTMENT

Inhaltszusammenfassung zur Seite Nr. 7

NOTES 7

Inhaltszusammenfassung zur Seite Nr. 8

     
      !" # "  #$%  $  #  &' () "*+, -.  ! /   0 123!# 4  ! /  5 00  05 0555 6 0 7     2 89: ;