Inhaltszusammenfassung zur Seite Nr. 8
5 Slide the spool guide onto the right side of the spool and press the guide tightly against the side of the label roll, leaving no gap between the roll and the spool. See Figure 6. NOTE To ensure proper feeding of labels during printing, the label roll must fit snugly against both sides of the label spool, with no gaps. Figure 6 6 Insert the label spool into the left slot in the printer cover with the labels extending from underneath the roll. See Figure 7. 7 Align the left edge of the l
Inhaltszusammenfassung zur Seite Nr. 9
5. Printing your First Label The first time you open the application, you are asked to register the software. Registering the software ensures that you will be informed of any software updates. During the registration process, you will be asked to enter the serial number for your label printer. The serial number is located on the bottom of the printer. To print your first label 1 Start DYMO Label software by doing one of the following: • For Windows, click Start, then Programs>DYMO>DYMO Label
Inhaltszusammenfassung zur Seite Nr. 10
Figure 9 highlights some of the major features available in DYMO Label software. Visually choose your label type and apply layouts. Print postage using Insert text, DYMO Stamps addresses, images, software. shapes, lines, barcodes, dates, and counters. Verify and correct addresses on your label. Store your favorite addresses in the Address Book or view your Outlook or Mac Select left or right roll Address Book contacts; to print your labels. automatically insert addresses on your label. Figu
Inhaltszusammenfassung zur Seite Nr. 11
Printing Postage with DYMO Stamps You can now print postage right from your desktop using your LabelWriter Twin Turbo label printer. All you need is DYMO Stamps software, your LabelWriter printer, DYMO Stamps labels, and an Internet connection. To install DYMO Stamps and print postage 1 Sign up for your USPS account with Endicia. Go to: www.endicia.com/dymostamps 2 At the end of the sign up process, download and install the DYMO Stamps software. DYMO Stamps software is available for both Wind
Inhaltszusammenfassung zur Seite Nr. 12
3 Enter your account number and pass phrase, and then click OK. 4Click Buy Postage and purchase postage for your account. 5 Select DYMO LabelWriter 450 Twin Turbo from the Printer list under Printer Selection. 6 Select Right Roll or Left Roll from the Label Roll list, depending on where you have DYMO Stamps postage labels loaded. 7 Click Test Print to print a voided postage label. You are now ready to start printing actual postage whenever you need it. Refer to the DYMO Stamps online Hel
Inhaltszusammenfassung zur Seite Nr. 13
Inhaltszusammenfassung zur Seite Nr. 14
Distributed by: DYMO, Atlanta, GA 30328 800-426-7827: www.dymo.com © 2010 Sanford, L.P. W008044 12/10 DIS-83
Inhaltszusammenfassung zur Seite Nr. 1
Quick Start Guide
®
LabelWriter 450 Twin Turbo
Inhaltszusammenfassung zur Seite Nr. 2
Copyright © 2010 Sanford, L.P. All rights reserved. Revised 12/10. No part of this document or the software may be reproduced or transmitted in any form or by any means, or translated into another language without the prior written consent of Sanford, L.P. Trademarks DYMO, LabelWriter, and DYMO Label are registered marks in the United States and other countries. All other trademarks are the property of their respective holders.
Inhaltszusammenfassung zur Seite Nr. 3
Quick Start Guide For complete information about your label printer, you can view the LabelWriter Printer User Guide from the DYMO Label v.8 Help menu or from the DYMO Web site at www.dymo.com. Follow these steps to install the LabelWriter printer and print your first label. 1. Unpacking your LabelWriter Printer NOTE Do not connect the printer into your computer until after the software installation is complete. 1 Unpack your printer and save the packing materials. 2 Make sure you have all th
Inhaltszusammenfassung zur Seite Nr. 4
Become familiar with the printer’s major components. See Figure 2. Serial number Top cover USB DC power connector connector Label roll Label guide Label eject button Label spool Form-feed button and LED Label release Label feed path and tear bar Cable channels Figure 2 LabelWriter Printer Features Your LabelWriter printer is a direct thermal printer and does not use ink or toner. Instead, the printer uses heat from a thermal print head to print on specially treated labels. Labels are the o
Inhaltszusammenfassung zur Seite Nr. 5
2. Installing the Software Do not connect the printer to your computer until after the software installation is complete. Windows Depending on your system configuration, the software installation could take ™ some time while the required Microsoft .NET software is installed. To install the software on a Windows system 1 Close all open Microsoft Office applications. 2 Insert the DYMO LabelWriter CD into your CD-ROM/DVD drive. After a few seconds, the installation screen appears. 3 Click Insta
Inhaltszusammenfassung zur Seite Nr. 6
3. Connecting your LabelWriter Printer NOTE Do not connect the printer to your computer until after the Power adapter software installation is complete. To connect the power 1 Plug the power cord into the power adapter. See Figure 3. Power cord 2 Plug the power adapter into the power connector on the bottom of Figure 3 the printer. See Figure 4. 3 Plug the other end of the power cord into a power outlet. USB Power 4 Plug the USB cable into the USB port on the bottom of the printer. 5 Insert th
Inhaltszusammenfassung zur Seite Nr. 7
4. Loading Labels The LabelWriter Twin Turbo printer holds two label rolls, so you can print two types of labels without having to change the label roll. For example, load address labels on one side and DYMO Stamps postage labels on the other side. Important! In order for the labels to feed properly during printing, pay attention to the following when loading labels on the spool and into the printer: • The label spool guide must be pushed flush against the label roll, with no gap. See Figure
