Bedienungsanleitung Harbor Freight Tools River Boat Wooden Model 90139

Inhaltszusammenfassung zur Seite Nr. 1

RIVER BOAT
WOODEN MODEL
ASSEMBLY INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2003 by Harbor Freight Tools . All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions please call 1-800-444-3353

Inhaltszusammenfassung zur Seite Nr. 2

SPECIFICATIONS ITEM DESCRIPTION Overall Dimensions 8-1/4” Long X 3-1/2” Wide X 3-7/8” High Template Dimensions 9” Long X 7-1/8” Wide (3X) Finish Natural Pressed Core-Wood Materials Pressed/Template Scored Core-Wood Net Weight 7.2 Ounces Age Appropriate 6 years and older SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice numb

Inhaltszusammenfassung zur Seite Nr. 3

ASSEMBLY INSTRUCTIONS 1. Check the part numbers on the templates below to the drawing on Page 4. Mark each with the corresponding number with a pencil to help organize. Lay out in numeric order on a smooth surface after pressing out each piece with your thumb. (See Figure A-C) #6 #12 #13 #16 #33 #40 #39 #17 #32 #38 #36 #34 #22 #38 #35 #37 #24 #1 #11 Figure B Figure A #23 #21 #18 #25 #26 #28 #19 #27 #7 #10 #8 #9 #2 #30 #3 #29 Figure C #4 #5 SKU 90139 PAGE

Inhaltszusammenfassung zur Seite Nr. 4

2. Smooth the edges of the punched out pieces with sand paper. Begin putting together by using the drawing below as a guide. Use glue on the portions shown in “black”. See arrows in Figure D. ® 3. Use Scotch Tape on the backside to hold round or non-flat pieces together. 4. A rubber band can be used to hold assembled pieces until glue has dried. Clean the edges or surfaces of the Riverboat with a wet cloth to remove wet glue or unsightly smudges. 5. Rod “A” passes through Paddle Wheels and fra

Inhaltszusammenfassung zur Seite Nr. 5

PARTS LIST PART # DESCRIPTION QTY Templates-Scored Core-Wood 1 3 Glue (White) (not shown) 2 1 3 Sand Paper (2” X 2”)(not shown) 1 A Axle Rod (not shown) 1 #1 #1 MAINTENANCE 1. For better and safer performance, keep all parts of this product clean and dry. 2. Periodically check to see that all hardware is in place. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE