Inhaltszusammenfassung zur Seite Nr. 1
Instructions for
WASHER-DRYER
installation and use
! This symbol reminds you to read this instruction manual.
EN
Contents
EN
English,1
Installation, 2-3-4-5
Unpacking and levelling
Connecting the electricity and water supplies
Technical data
Care and maintenance, 6
Cutting off the water and electricity supplies
Cleaning the machine
Cleaning the detergent dispenser drawer
Caring for your appliance drum
Cleaning the pump
Checking the water inlet hose
Precautions and advice, 7
General safety
AQU
Inhaltszusammenfassung zur Seite Nr. 2
Installation ! This instruction manual should be kept in a ! If the appliance is levelled correctly, it will EN safe place for future reference. If the washing be more stable and much less likely to cause machine is sold, given away or moved, please vibrations and noise while it is operating, ensure the manual is kept with the machine, particularly during the spin cycle. so that the new owner may benefit from the ! If it is placed on carpet or a rug, adjust the advice contained within it. fe
Inhaltszusammenfassung zur Seite Nr. 3
65 - 100 cm Connecting the drain hose • the socket is compatible with the washing EN machine’s plug. If this is not the case, replace Connect the drain the socket or the plug. hose, without bending it, to a Your appliance is now supplied with a 13 amp draining duct or a fused plug it can be plugged into a 13 amp wall drain situated socket for immediate use. Before using the between 65 and 100 appliance please read the instructions below. cm from the floor; WARNING - THIS APPLIANCE MUST B
Inhaltszusammenfassung zur Seite Nr. 4
As the colours of the wires in the lead may ! The power supply cable must only be EN not correspond with the coloured markings replaced by an authorised serviceman. identifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green & Yellow wire to terminal when these norms are not respected. marked E or or coloured Green or Green & Yellow. Connect Brown wire to terminal marked L or coloured Red. Connect Blue wire to terminal marked N
Inhaltszusammenfassung zur Seite Nr. 5
EN Technical data AQD1170D 697 E Model AQD1170D 697 I width 59.5 cm Dimensions height 85 cm depth 64.5 cm from 1 to 11 kg for the wash programme Capacity from 1 to 7 kg for the drying programme please refer to the technical Electrical data plate fixed to the ma- connections chine maximum pressure 1 MPa (10 bar) Water con- minimum pressure nections 0.05 MPa (0.5 bar) drum capacity 71 litres up to 1600 rotations per Spin speed minute Wash: programme ; tem- perature 60°C; using a load of 11
Inhaltszusammenfassung zur Seite Nr. 6
Care and maintenance To access the pre-chamber: Cutting off the water and EN electricity supplies • Turn off the water tap after every wash cycle. 1 This will limit wear on the hydraulic system in the machine and help to prevent leaks. • Unplug the appliance when cleaning it and 2 during all maintenance work. Cleaning the machine 1. take off the cover panel on the front of the machine by first pressing it in the centre and The outer parts and rubber components of the then pushing downwar
Inhaltszusammenfassung zur Seite Nr. 7
Precautions and tips ! The machine was designed and constructed in Load balancing system EN accordance with international safety regulations. The Before every spin cycle, to avoid excessive vibrations following information is provided for safety reasons and before every spin and to distribute the load in a uniform must therefore be read carefully. manner, the drum rotates continuously at a speed which is slightly greater than the washing rotation speed. If, General safety after several at
Inhaltszusammenfassung zur Seite Nr. 8
Description of the machine CONTROL EN PANEL PORTHOLE DOOR PORTHOLE DOOR HANDLE KICK STRIP PORTHOLE DOOR washing additives compartment: for fabric softener Always use the handle to or liquid additives. We recommend that the maximum open the porthole door (see level indicated by the grille is not exceeded, and that figure). concentrated fabric softeners are diluted. TOUCH CONTROL PANEL To adjust the settings, gently press the icon inside the sensitive (touch control) area as illustrate
Inhaltszusammenfassung zur Seite Nr. 9
START/PAUSE button Touch control panel with indicator light SPIN WASH EN button CYCLE WASH CYCLE M1 ECO PHASE M2 TEMPERATURE SELECTOR knob indicator light button icons DISPLAY CHILD LOCK OPTION Button with ON/OFF DELAYED START button with indicator light DRYING buttons indicator light button button LOCK indicator light WASH CYCLE PHASE icons: these illuminate to indicate Button with ON/OFF indicator light: press this briefly the progress of the wash cycle (Wash – Rinse – to
Inhaltszusammenfassung zur Seite Nr. 10
How to run a wash cycle or a drying cycle WARNING: before you use the Washer-dryer for the first time, Drying only EN run a wash cycle with detergent and no laundry, using the 90° Use the cycle selector knob to select a drying cycle ( - - ) cottons cycle without pre-wash. in accordance with the type of fabric. The desired drying level or time may also be set using the DRYING button . 1. SWITCH THE MACHINE ON. Press the button. All the indicator lights will illuminate for 1 second and the te
Inhaltszusammenfassung zur Seite Nr. 11
(*) The duration of the wash cycles can be checked on the display. Wash cycles and options Table of wash cycles EN Detergent and Max. Max. additives Max. temp. Cycle Icon Description of the wash cycle speed Drying load (°C) Fabric duration (rpm) Wash (kg) softener Cotton Coloureds (2): lightly soiled whites and delicate colours. 40° 1600 11 Synthetics Resistant 60° 800 5 Synthetics Resistant (4) 40° 800 5 Whites 60° 1600 6 Coloureds (3) 40° 1600 6 Darks 30° 80
Inhaltszusammenfassung zur Seite Nr. 12
Detergents and laundry Steam Refresh: this programme refreshes garments by Detergent EN removing bad odours and relaxing the fibres (2 kg, roughly The type and quantity of detergent required depend on 3 items). Insert dry items only (that are not dirty) and select the type of fabric you are washing (cotton, wool, silk, etc.), programme “ “. The garments will be damp once the as well as its colour, the washing temperature, the level of cycle is completed, so we recommend hanging them to s
Inhaltszusammenfassung zur Seite Nr. 13
Trouble shooting Your washing machine could occasionally fail to work. Before contacting the Technical Assistance Centre (see “Assistance”), EN make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. • The appliance is not plugged into the socket fully, or not enough to make contact. • There is no power to the socket, or the fuse has blown in the mains plug. The wash cycle does not start. • The door is no
Inhaltszusammenfassung zur Seite Nr. 14
The machine is noisy. • There will always be some motor, pump and drum noise during spin. EN The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly. This is a safety feature to prevent damage. Out of Balance can be caused by washing a single heavy it
Inhaltszusammenfassung zur Seite Nr. 15
Assistance Guarantee EN 12 Months Parts and Labour Guarantee Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase. This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you. This guarantee is subject to the following conditions:
Inhaltszusammenfassung zur Seite Nr. 16
195098434.01 09/2012 - Xerox Fabriano After Sales Service EN No one is better placed to care for your Hotpoint appliance during the course of its working life than us - the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in Europe offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service. UK: 08448 224 224 Republic of Ireland: 0818 313 413 www.hotpointserv
