Bedienungsanleitung Bolens 460 Series

Bedienungsanleitung für das Gerät Bolens 460 Series

Gerät: Bolens 460 Series
Kategorie: Hackmaschine
Produzent: Bolens
Größe: 3.41 MB
Datum des Hinzufügens: 8/28/2014
Seitenanzahl: 36
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Bolens 460 Series zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Bolens 460 Series finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Bolens 460 Series auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Bolens 460 Series im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Bolens 460 Series auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Bolens 460 Series Handbuch - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Bolens 460 Series Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Bolens 460 Series befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

Safety • Assembly • Operation • Tips & Techniques • Maintenance • Troubleshooting • Parts Lists • Warranty
OPERATOR’S MANUAL
*Model Series 460 Shown
Chipper Shredder — Model Series 450 and 460
IMPORTANT
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION
Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-
covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arreste

Inhaltszusammenfassung zur Seite Nr. 2

This Operator’s Manual is an important part of your new chipper shredder. It will help you assemble, pre- pare and maintain the unit for best performance. Please read and understand what it says. Table of Contents Customer Support ..............................................  Maintaining Your Chipper Shredder ................ 1 Safety Labels ...................................................... 3 Troubleshooting ................................................ 14 Safe Operation Practices .

Inhaltszusammenfassung zur Seite Nr. 3

Safety Labels Found On Your Chipper Shredder 1 DANGER DANGER TO AVOID SERIOUS INJURY: • Read the owner's manual(s) before starting and Safety TO AVOID SERIOUS INJURY: using unit. • Do not operate on uneven ground where unit is • Keep all shields and guards in place and securely unstable. Do not operate on pavement, gravel or attached. Labels other hard surfaces since objects can ricochet • Keep hands, feet, face, clothing and long hair out of and cause injury. Shredder Hopper, Chipper Chute a

Inhaltszusammenfassung zur Seite Nr. 4

WARNING: Engine Exhaust, some of its constituents, and certain vehicle compo- nents contain or emit chemicals known to State of California to cause cancer and birth defects or other reproductive harm.  DANGER: This machine was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This machine is capable of amputating hands and feet and throwing objects

Inhaltszusammenfassung zur Seite Nr. 5

Operation Maintenance & Storage 1. Do not put hands and feet near rotating parts or in the 1. Never tamper with safety devices. Check their proper feeding chambers and discharge opening. Contact with the operation regularly. rotating impeller can amputate fingers, hands, and feet. 2. Check bolts and screws for proper tightness at frequent  2. Before starting the machine, make sure the chipper chute, intervals to keep the machine in safe working condition. feed intake, and cutting chamber are

Inhaltszusammenfassung zur Seite Nr. 6

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil as instructed in the separate engine manual A before operating your machine. 3 Loose Parts In Carton a. Hopper Assembly d. Bag b. Chute Deflector e. Safety Glasses Setting Up c. Chipper Chute f. Engine Oil Your Chipper Attaching The Hopper Shredder Assembly 1. a. Remove six hex nuts and washers from the weld B studs on the impeller housin

Inhaltszusammenfassung zur Seite Nr. 7

Attaching The Chute Deflector 3. a. Remove the wing knobs from each side of the lower B impeller housing. b. Remove the hex lock nut, spacers, and hex bolt from 3 the top of the impeller housing. See Figure 3-3. A 4. a. Align the chute deflector in position on the discharge opening and insert hex bolt with spacer Setting Up through hinge on chute deflector (spacers fit inside of hinges). See Figure 3-4. Your Chipper b. Place second spacer over hex bolt inside other C Shredder hinge and

Inhaltszusammenfassung zur Seite Nr. 8

7. The chipper shredder was shipped with one end of the support brace already secured to the lower frame. Loosen but do not remove the bolts securing the brace to the frame. See Figure 3-7. 3 a. Align the holes in the chute with the holes in the top of the brace and attach brace to chipper chute with hardware previously removed. Tighten securely. A Setting Up b. Tighten the bolts securing the support brace to the frame. Your Chipper c. Tighten the three nuts on the weld studs holding

Inhaltszusammenfassung zur Seite Nr. 9

9. a. Align the chipper chute over the weld studs, so the slot in the bottom of the chute is facing down. b. Secure chipper chute with the three cupped washers (cupped side against the chipper chute) and hex nuts previously removed. Tighten the nuts 3 at this time. See Figure 3-9. Attaching The Bag Setting Up 10. To attach the bag: Your Chipper a. Place the opening of the bag completely over the chute deflector. Shredder b. Pull on the drawstring until the bag is tight around chute def

Inhaltszusammenfassung zur Seite Nr. 10

Know Your Chipper Shredder 4 Hopper Assembly Operating Release Rod Your Chipper Shredder Chipper Chute WARNING The operation of any chipper shredder can result in foreign Tow Bar† objects being thrown † If Equipped into the eyes, which *Model 464 Shown with Optional Tow Bar can damage your Figure 4-1 eyes severely. Always Now that you have set up your chipper shredder for wear the safety Gas and Oil Fill-Up operation, get aquainted with its controls and features. 1. Check oil level an

Inhaltszusammenfassung zur Seite Nr. 11

This Operators Manual covers a range of product specifications for various models. Characteristics and fea- tures discussed and/or illustrated in this manual may not be applicable to all models. MTD LLC reserves the right STOP to change product specifications, designs and equipment 4 without notice and without incurring obligation. Starting Engine Operating Your Chipper WARNING: Never run the engine Figure 4- indoors or in a poorly ventilated area. Shredder Engine exhaust contains carbon

Inhaltszusammenfassung zur Seite Nr. 12

Lubrication 1. Lubricate the release rod and spring with light oil once a season. See Figure 5-1. Lubricate these 2. Lubricate the pivot points on the hopper assembly with points before 5 light oil once a season. See Figure 5-1. reassembly. 3. Lubricate the pivot points on the discharge chute with light oil once a season. See Figure 5-1. Maintaining 4. Follow the accompanying engine manual for lubrica- Your Chipper tion schedule and instruction for engine lubrication. Shredder Engine Car

Inhaltszusammenfassung zur Seite Nr. 13

6. Remove the blade by removing the internal hex screws, lock washers, and hex nuts which secure it to the impeller. Retain the hardware. See Figure 5-3. NOTE: Use a 3/16” hex key (Allen) wrench on the outside 5 of the blade and a 1/2” box (or socket) wrench on the inside of the impeller. Hold the Allen wrench stationary and rotate the box (or socket) wrench to loosen the nut. Maintaining Your Chipper 7. Install a replacement blade (Part No. 781-0490) with the hardware removed earlier or

Inhaltszusammenfassung zur Seite Nr. 14

Problem Cause Remedy 1. Throttle lever not in correct starting 1. Move throttle lever to FAST or Engine fails to start position (if equipped). START position. 6 2. Spark plug wire disconnected. 2. Connect wire to spark plug. 3. Choke not in CHOKE position (if 3. Move choke lever to CHOKE Trouble equipped). position. 4. Fuel tank empty or stale fuel. 4. Fill tank with clean, fresh gasoline. Shooting 5. Engine not primed (if equipped). 5. Prime engine as instructed in Engine Manual. 6. Clean,

Inhaltszusammenfassung zur Seite Nr. 15

NOTES Use this page to make notes and write down important information. 15

Inhaltszusammenfassung zur Seite Nr. 16

Model Series 450 and 460 9 8 4 2 2 10 7 3 12 10 6 20 19 17 11 22 14 21 7 8 13 16 23 27 15 23 1 25 11 18 5 16 24 18 13 11 26 35 34 34 33 38 32 30 38 36 31 40 41 34 38 39 29 34 43 42 34 38 37 28 35 34 35 16

Inhaltszusammenfassung zur Seite Nr. 17

Ref. Part No. Description No. 1. 736-0217 Lock Washer, 3/8  2. 714-0149B Cotter Pin 3. 681-0048 Wing Knob 5/16-18 4. 681-0094 Chute Deflector Assembly Parts List 5. 711-0835 Clevis Pin 6. 781-0457 Shredder Screen 7. 726-0211 U-Nut 5/16-18 8. 750-0793 Spacer 9. 712-3027 Hex Lock Nut, 1/4-20 10. 712-3004A Hex Lock Nut 5/16-18 11. 736-0119 Lock Washer 5/16 12. 681-0117 Inner Impeller Housing Assembly 13. 710-3025 Hex Cap Screw 5/16-18 x.625 To order replacement 14. 710-0157 Hex Cap Screw 5

Inhaltszusammenfassung zur Seite Nr. 18

19 Model Series 450 and 460 25 26 24 13 1 10 3 4 8 31 6 7 2 9 9 33 12 27 8 30 6 9 22 7 32 35 21 34 5 29 7 28 33 11 10 23 15 16 17 14 20 17 19 18 20 1

Inhaltszusammenfassung zur Seite Nr. 19

Ref. Part No. Description No. 1. 728-0175†† Pop Rivet 2. 681-0095† Chipper Shredder Chute  731-1899†† Chipper Shredder Chute 3. 735-0249†† Chute Flap Parts List 4. 781-0633†† Chute Flap Strip 5. 681-0068A†† Chipper Chute Assembly 6. 710-0751†† Hex Cap Screw 1/4 -20 x.620 7. 712-3027†† Hex Lock Nut 1/4-20 8. 710-0106†† Hex Cap Screw 1/4-20 x 1.25 9. 736-0173†† Flat Washer.28 ID x.74 OD 10. 736-0242 Bell Washer.340 ID x.872 OD 11. 712-3010 Hex Nut 5/16-18 12. 749-1004†† Support Brace To order r

Inhaltszusammenfassung zur Seite Nr. 20

MANUFACTURER’S LIMITED WARRANTY FOR The limited warranty set forth below is given by MTD LLC with c. Routine maintenance items such as lubricants, filters, blade respect to new merchandise purchased and used in the United States sharpening, tune-ups, brake adjustments, clutch adjustments, and/or its territories and possessions, and by MTD Products Limited deck adjustments, and normal deterioration of the exterior finish with respect to new merchandise purchased and used in Canada and/ due to


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Bolens 452 Thru 465 Handbuch Hackmaschine 0
2 Bolens 246-650-000 Handbuch Hackmaschine 1
3 Bolens 24650L Handbuch Hackmaschine 0
4 Bolens 247-203B-000 Handbuch Hackmaschine 0
5 Bolens 247.77635 Handbuch Hackmaschine 2
6 Bolens 247.77763 Handbuch Hackmaschine 2
7 Bolens 247-315A-000 Handbuch Hackmaschine 0
8 Bolens 24650C Handbuch Hackmaschine 0
9 Bolens 247-103A-000 Handbuch Hackmaschine 0
10 Bolens 450 Series Handbuch Hackmaschine 13
11 Bolens 244-650-000 Handbuch Hackmaschine 0
12 Bolens - Shredders 462 Thru 465 Handbuch Hackmaschine 2
13 Philips SVGA COLOUR MONITOR 7CM5209 Handbuch Hackmaschine 0
14 Agri-Fab Chip-N-Vac 2468 Handbuch Hackmaschine 1
15 Philips SVGA COLOUR MONITOR 7CM5279 Handbuch Hackmaschine 2
16 Agri-Fab Chip-N-Vac 552493 Handbuch Hackmaschine 0
17 Agri-Fab Chip-N-Vac 502493 Handbuch Hackmaschine 1