Bedienungsanleitung Harbor Freight Tools 47894

Inhaltszusammenfassung zur Seite Nr. 1

Item # 47894
Night Vision Scope
with Illuminator 3.6X
Operating Instructions
®
3491 Mission Oaks Blvd. Camarillo, CA 93011
®
Copyright 2003 by Harbor Freight Tools . All Rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For Technical Questions and replacement

Inhaltszusammenfassung zur Seite Nr. 2

Please read the entire manual before using the Night Vision Scope with Illuminator. Specifications Magnification 3.6X Angle of View 12 degrees Lens 1.6 / 85 mm Power Source 2 AA batteries Minimum Focal Distance 18 inches Accessories Black Nylon Carrying Case with Shoulder Strap Features 1. The Power On Button (#2) automatically shuts down if the unit is exposed to bright light. 2. Includes black nylon case with shoulder strap. Warning !! Do not use Night Vision Scope with

Inhaltszusammenfassung zur Seite Nr. 3

Installing the Battery. Refer to figure 1. Uses 2 “AA” batteries (not included). Open the Battery Compartment Cover (#8) and install the batteries. Close the Battery Compartment Cover (#8). Figure 1 Objective Lens Ring (#4) Illuminator Objective Lens (#5) Button (#3) Power Button (#2) (lens cap not shown) Eyepiece Illuminator (#6) (#1) Battery Compartment (#8) (opposite side) Operation Without Illuminator. 1. REMEMBER, IF YOU ARE NOT IN A DARK AREA, DO NOT REMOVE T

Inhaltszusammenfassung zur Seite Nr. 4

Tube Screen Appearance Light and dark spots caused by image converter tube may be visible in the field of view. . . These are normal and not considered imperfections by Image Intensifier Standards. Most of the distortion will occur in the peripheral area, not in the center. Maintenance 1. Always clean lens with professi