Bedienungsanleitung Team Products PMD8128

Inhaltszusammenfassung zur Seite Nr. 1

TEAM PRODUCTS INTERNATIONAL INC. Limited Warranty
WhAT IS COvERED : Any defect in materials and workmanship.
FOR hOW LONg : 2 years from date of purchase.
WhAT WE WILL DO : If your product is defective and returned within 30 days
after the date it was purchased, we will replace it at no charge to you. If
returned after 30 days but within 2 years of the date of purchase we will
repair it or, at our option, replace it at no charge to you.
If we repair your product, we may use new or recondition

Inhaltszusammenfassung zur Seite Nr. 2

12V, 14.4V, 18V Owner’s Manual Cordless Drills Welcome 15. Remove adjustment keys and wrenches. Form a habit to make sure This COLEMAN® product has been carefully engineered and manufactured to that the adjustment keys and wrenches are removed from the tools before give you dependable operation. Please read this manual thoroughly before turning them ON. operating your new COLEMAN® product, as it contains the information you need to become familiar with its features and obtain the performa

Inhaltszusammenfassung zur Seite Nr. 3

12V, 14.4V, 18V Owner’s Manual Cordless Drills 5. To reduce the risk of damaging the battery charger power cord, be sure to pull Controls and Components: the plug rather then the cord when disconnecting it from the power supply. Always position the cord so it will not be stepped on or tripped over. This will Batteries and AC Charger prevent damage to the cord. 1. Battery with Release Buttons On Each Side (PMD8133 includes 2 batteries) 6. An extension cord should not be used unless absolut

Inhaltszusammenfassung zur Seite Nr. 4

12V, 14.4V, 18V Owner’s Manual Cordless Drills INSTRUCTIONS FOR USE: NOTE: While the battery is placed in the charger, the RED LED indicator light will remain on. If charging more than one battery, wait at least 15 minutes Charging The Battery between each charge. Use only the battery charger that is supplied with this THE BATTERY(IES) MAY NOT BE FULLY CHARGED FROM THE tool. Using another charger may cause damage to the battery. FACTORY. READ ALL INSTRUCTIONS THOROUGHLY PRIOR TO FIRST WAR

Inhaltszusammenfassung zur Seite Nr. 5

12V, 14.4V, 18V Owner’s Manual Cordless Drills Your drill comes with an automatic braking function that quickly stops the chuck TROUBLESHOOTING TIPS: from turning when the trigger switch is released. DRILL DOES NOT WORK? Your drill (models PMD8131 and PMD8133) has two speed ranges; low speed • Recharge the battery (position 1) (0-400 rpm) and high speed (position 2 ) (0-1100 rpm). CHARGING INDICATOR LED NOT ILLUMINATED DURING RECHARGING? Screwdriver Operation • Check that battery pack is p

Inhaltszusammenfassung zur Seite Nr. 6

12V, 14.4V, 18V Owner’s Manual Cordless Drills SPECIFICATIONS for PMD8129 Voltage 18V Speed 1 0-600RPM Torque Settings 24 + Drill Chuck Capacity up to 3/8” Charger Input 120V AC 60Hz Charging Time Approx. 3 –8 Hours Battery Type Ni-Cad SPECIFICATIONS for PMD8131 and PMD8133 Voltage 18V Speed 1 0-400RPM Speed 2 0-1100RPM Torque Settings 24 + Drill Chuck Capacity up to 3/8” Charger Input 120V AC 60Hz Charging Time Approx. 3 –8 Hours Battery Type Ni-Cad Questions? If you have any questions about t