Bedienungsanleitung Wayne-Dalton Corp.255081

Inhaltszusammenfassung zur Seite Nr. 1

™
TorqueMaster End Bracket Extension
Installation Instruction Insert
Wayne-Dalton, a Division of Overhead
Door Corporation
P.O. Box 67
Mt. Hope, OH 44660
www.Wayne-Dalton.com
Use this insert in conjunction with the installation manual provided with the door. Follow the corresponding steps in this insert with the steps in the
installation manual.
END BRACKET EXTENSION KIT : PART NO. 255084 PREPARING THE CENTER BRACKET
Components:
Step 2
(1) pair End Bracket Extension
™
Before installing th

Inhaltszusammenfassung zur Seite Nr. 2

INSTALLING CENTER BRACKET Step 3 Standing inside the building looking out, lay the spring tube assembly on the floor in front of the door with the red winding shaft to the left. Align the cams of the spring tube assembly and the adjustable center bracket/bushing assembly. Slide the adjustable center bracket/bush- ing assembly onto the center of the spring tube. (Figure 3). ADJUSTING THE CENTER BRACKET Step 4 Attach the center bracket extension to the header using supplied (2) 5/16 x 1-5/8”