Inhaltszusammenfassung zur Seite Nr. 1
Wireless Broadband
Router
A02-RB-W54
USER GUIDE
A02-RB-W54(V1.1) _ME01
Where solutions begin
Company certified ISO 9001:2000
Inhaltszusammenfassung zur Seite Nr. 2
Where solutions begin Company certified ISO 9001:2000
Inhaltszusammenfassung zur Seite Nr. 3
Wireless Broadband Router INDEX CHAPTER 1: INTRODUCTION 1 1.1 An Overview of the del Wireless Broadband Router 1 1.2 Package Contents 2 1.3 Technical Features 2 1.4 System Requirements 3 1.5 Setup 3 CHAPTER 2: USING WIRELESS BROADBAND ROUTER 4 2.1 Cautions for using the Wireless Broadband Router 4 2.2 The Front LEDs 4 2.3 The Rear Ports 5 2.4 Cabling 6 CHAPTER 3: CONFIGURATION 8 3.1 Before Configuration 8 3.1.1 Windo
Inhaltszusammenfassung zur Seite Nr. 4
Wireless Broadband Router 3.6.1 Basic 40 3.6.2 DHCP 41 3.7 Access Control 42 3.7.1 Filter 42 3.7.1.2 MAC Filter 43 3.7.1.3 IP Filter 45 3.7.1.4 URL Blocking 46 3.7.1.5 Domain Blocking 47 3.7.1.6 Protocol Filter 48 3.7.2 Virtual Server 49 3.7.3 Special AP 52 3.7.4 DMZ 53 3.7.5 Firewall Rule 54 3.8 System 56 3.8.1 Password 56 3.8.2 Time 57 3.8.3 Device Information 58 3.8.4 Log 60 3.8.5 Log Settings 61 3.8.6 Statistic
Inhaltszusammenfassung zur Seite Nr. 5
Wireless Broadband Router APPENDICE C: TECHNICAL FEATURES 78 APPENDICE D: SUPPORT 79 A02-RB-W54(V1.1)_ME01 (V1.0 January 2007)
Inhaltszusammenfassung zur Seite Nr. 6
Wireless Broadband Router Copyright Statement No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, whether electronic, mechanical, photocopying, recording or otherwise without the prior writing of the publisher. Windows™ 98SE/2000/ME/XP are trademarks of Microsoft® Corp. Pentium is trademark of Intel. All copyright reserved. The Atlantis Land logo is a register
Inhaltszusammenfassung zur Seite Nr. 7
Wireless Broadband Router Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland, Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland. France: except the channel 10 through 13, law prohibits the use of other channels. CE/EMC Restriction of Liability The product described in this handbook was designed, produced and approved according to the EMC-regulations and is certified to be within EMC limit
Inhaltszusammenfassung zur Seite Nr. 8
Wireless Broadband Router CHAPTER 1: Introduction Congratulations on your purchase of Atlantis Land Wireless Broadband Router. This integrated access device combines Internet gateway functions with wireless LAN and Fast Ethernet switch. It provides a complete solution for Internet surfing and office resources sharing, and it is easy to configure and operate for every users. This manual discusses how to install the IEEE 802.11g
Inhaltszusammenfassung zur Seite Nr. 9
Wireless Broadband Router 1.2 Package Contents Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer as soon as possible. Also, keep the box and packing materials in case you need to ship the unit in the future. The package should contain the following items: • Wireless Broadband Router • 2 dBi Antenna • CDRom with online manual • Quick Start Gui
Inhaltszusammenfassung zur Seite Nr. 10
Wireless Broadband Router 1.4 System Requirements Before installing the device, your PC should meet the following: • Intel® Pentium®III 600Mhz or compatible processor with TCP/IP stack • Iinternet Explorer V6.0 on Netscape V6.0 • CDRom 1.5 Setup The setup of the Wireless Broadband Router can be performed properly using the following methods: • The power outlet should be within 1.82 meters (6 feet) of the Broadband Router
Inhaltszusammenfassung zur Seite Nr. 11
Wireless Broadband Router CHAPTER 2: Using Wireless Broadband Router 2.1 Cautions for using the Wireless Broadband Router • Do not place this device under high humidity and high temperature. • Do not use the same power source for Wireless Broadband Router with other equipment. • Do not open or repair the case yourself. If the Wireless Broadband Router is too hot, turn off the power immediately and have a qualified serviceman
Inhaltszusammenfassung zur Seite Nr. 12
Wireless Broadband Router The indicators blink green while the WAN port was transmitting or receiving data on the xDSL/Cable modem. This indicator lights green when there are wireless devices WLAN connected and transmitting data to the Wireless Router. These indicators light green when the LAN ports were connected successfully. LAN (1-4) These indicators blink green while the LAN ports were transmitting data. 2.3 The Rear P
Inhaltszusammenfassung zur Seite Nr. 13
Wireless Broadband Router shape item to push to reset this device to factory default settings. It will be useful too when the manager forgot the password to login, but the setting will be back to default setting. 2.4 Cabling Plug in one end of the network cable to the WAN port of the Wireless Internet Broadband Router. Plug in the other end of the network cable to the Ethernet port of the xDSL or Cable modem (E.G A02-RA141
Inhaltszusammenfassung zur Seite Nr. 14
Wireless Broadband Router A02-RB-W54 Pag. 7
Inhaltszusammenfassung zur Seite Nr. 15
Wireless Broadband Router CHAPTER 3: Configuration The Wireless Broadband Router has a Web GUI interface for the configuration. The device can be configured through the Web Browser. A network manager can manage, control and monitor the Router from the local LAN. This section indicates how to configure the AP to enable its functions. 3.1 Before Configuration This section describes the configuration required by LAN-attached PCs t
Inhaltszusammenfassung zur Seite Nr. 16
Wireless Broadband Router 3.1.1 Windows 95/98/ME 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible, or the name of any Network Interface Card (NIC) in your PC. 3. Click Properties. 4. Select the IP Address tab. In this page, click the Obtain an IP address automatically radio button.
Inhaltszusammenfassung zur Seite Nr. 17
Wireless Broadband Router 3.1.2 Windows NT4.0 1. Go to Start / Settings / Control Panel. In the Control Panel, double- click on Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties. 3. Select the Obtain an IP address from a DHCP server radio button and click OK. A02-RB-W54 Pag. 10
Inhaltszusammenfassung zur Seite Nr. 18
Wireless Broadband Router 3.1.3 Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2. Double-click LAN Area Connection. 3. In the LAN Area Connection Status window, click Properties. 4. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons.). 5. Click OK to finish the configura
Inhaltszusammenfassung zur Seite Nr. 19
Wireless Broadband Router 3.1.4 Windows XP 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double- click on Network Connections. 2. Double-click Local Area Connection 3. In the LAN Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio b
Inhaltszusammenfassung zur Seite Nr. 20
Wireless Broadband Router 3.2 Factory Default Settings Before configuring the Wireless Broadband Router through WLAN, make sure that the SSID, Channel and the WEP was set properly. The default setting of the Wireless Broadband Router that you will use: • User: admin • Password: admin • IP Address: 192.168.1.1 • Subnet Mask: 255.255.255.0 • DHCP Server: enable (192.168.1.100-192.168.1.199) • Wep Encryption: disable • SS
