Inhaltszusammenfassung zur Seite Nr. 1
OL400-10
KODAK OMS Imaging Software
Installation Guide
Inhaltszusammenfassung zur Seite Nr. 2
Notice © PracticeWorks Systems, LLC, 2009. No part of this publication may be reproduced, stored in a retrieval system, translated to another language, or transmitted in any form by any means, electronic, mechanical, photocopied, recorded, or otherwise, without prior written permission. NEITHER PRACTICEWORKS SYSTEMS, LLC NOR ITS PARENT OR ANY OF ITS SUBSIDIARIES MAKES ANY WARRANTY OF ANY KIND WITH RESPECT TO THIS MATERIAL INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILIT
Inhaltszusammenfassung zur Seite Nr. 3
Installing KODAK OMS Imaging Software This guide describes the process for new and upgrade installations of the Kodak OMS imaging software. Read this document carefully before installing the new software. This guide includes the following topics: • Getting Started on page 2 • Previewing the New Features on page 3 • Installing the KODAK OMS Imaging Software on page 4 • Upgrading the KODAK OMS Imaging Software on page 7 • Installing the KODAK CR 7400 Digital Radiography System on page 10 Importan
Inhaltszusammenfassung zur Seite Nr. 4
Getting Started Getting Started Before you install the software, make sure that each computer in your network meets the minimum system requirements. For more information about system requirements, see the System Requirements document shipped with your software. Mapping a Network Drive Share the server’s hard drive and map a drive on each workstation running the software to the drive. For information about sharing and mapping drives and folders, see the documentation and online Help provided
Inhaltszusammenfassung zur Seite Nr. 5
Previewing the New Features Previewing the New Features If you want to preview the new and enhanced features in this version of the imaging software, you can watch a video from the software DVD. The preview video contains a brief overview of the new features. To hear the audio portion of the video, your computer must have a sound card and either headphones or speakers. To run the Release Overview video, follow these steps: 1. Verify that all other programs on the server are closed, and insert
Inhaltszusammenfassung zur Seite Nr. 6
Installing the KODAK OMS Imaging Software Note Installing the KODAK OMS Imaging Software If upgrading a previous To install the Kodak OMS imaging software for the first time, follow these procedures: software installation, see Upgrading the KODAK OMS Imaging • Install the software on the image server. Software on page 7. • Register the software on the image server. Caution! • Install the software on each workstation. Before performing a • Connect and install any imaging hardware. server ins
Inhaltszusammenfassung zur Seite Nr. 7
Installing the KODAK OMS Imaging Software 4. Select Image Server and click OK. The Welcome window is displayed, reminding you to Note exit all programs running on this computer. The default folder location is based on 5. Verify that all programs are closed and click Next. The Choose Destination Location your system configuration and window is displayed. should not be changed. 6. Click Next. The software is installed. Note If you are installing the 7. Click Finish. A message is displayed
Inhaltszusammenfassung zur Seite Nr. 8
Installing the KODAK OMS Imaging Software The second Registration window is displayed. Note If you register the software over the Internet, the registration code is retrieved automatically. Figure 5 Registration Window 3. Enter the registration code and click OK. The Kodak OMS imaging software is displayed. Installing the Software on a Workstation Note To install the Kodak OMS imaging software on a workstation, follow these steps: If you are installing the 1. Exit any applications running o
Inhaltszusammenfassung zur Seite Nr. 9
Upgrading the KODAK OMS Imaging Software 8. Click Finish. A message is displayed, prompting you to restart your computer. 9. Click OK to restart your computer. After your computer restarts, a message is displayed, prompting you to select the feature to install. Important 10. Click Exit and repeat these steps to install the software on each workstation in your network. The software must be installed on each network computer containing practice Upgrading the KODAK OMS Imaging Software mana
Inhaltszusammenfassung zur Seite Nr. 10
Upgrading the KODAK OMS Imaging Software 3. Click Install OMS Imaging Software. If you are using the DR software, click Install Imaging Software. The setup program copies the system files to your computer and updates the system configuration. Note If you are installing the 4. Click Finish. A message is displayed, prompting you to restart your computer. software using a cd, when prompted remove the first cd from the 5. Restart your computer. If you have digital radiography equipment instal
Inhaltszusammenfassung zur Seite Nr. 11
Upgrading the KODAK OMS Imaging Software Important Upgrading the Software on a Workstation You must turn on the To upgrade the Kodak OMS imaging software on a workstation, follow these steps: image server. The software will check to 1. Exit any applications running on this computer. ensure the upgrade was run on the image server. If it does not 2. Insert the software DVD in the DVD-ROM drive on the computer. The KODAK OMS find the upgrade, an Imaging install menu is displayed. error is d
Inhaltszusammenfassung zur Seite Nr. 12
Installing the KODAK CR 7400 Digital Radiography System Installing the KODAK CR 7400 Digital Radiography System To install the KODAK CR 7400 digital radiography system, complete the following in this Important order: For information on setting up your • Install the drivers. system, see the KODAK CR 7400 • Install the software. Digital Radiography System Installation To install the Kodak CR 7400 software, follow these steps: Guide (AT074412). 1. To launch the installation wizard, insert t
