Inhaltszusammenfassung zur Seite Nr. 1
User’s Manual
Model:NST-D300S3
SATA to SuperSpeed USB 3.0
www.vantecusa.com
All Registered Trademarks Belong To Their Respected Companies. Copyright © 2010 Vantec Thermal Technologies. All Rights Reserved.
Inhaltszusammenfassung zur Seite Nr. 2
■ Table of Contents 1. Introduction .................................................................................................................2 2. System Requirements...............................................................................................2 3. Speci cations/Features............................................................................................3 4. Installation ...............................................................................................
Inhaltszusammenfassung zur Seite Nr. 3
1.Introduction The Vantec NexStar® SuperSpeed USB 3.0 Hard Drive Dock is a complete and easy way to add or swap hard drives with your computer. Integrated with the latest USB 3.0 technology, performance is increased by 10 fold o ering maximum speeds of up to 5 Gbps. The need of opening up your computer case or installing the hard drive into an enclosure is now a distant memory. Simply insert any 2.5” or 3.5” SATA I/II hard drive into the Hard Drive Dock and you are ready to transfer, copy,
Inhaltszusammenfassung zur Seite Nr. 4
3.Specifications/Features Features : Package Includes : ■ Install and Access Hard Drives in Seconds ■ NexStar® SuperSpeed USB 3.0 Hard Drive Dock ■ USB 3.0 Cable (3ft) ■ Simple to Use Design; No Screws Needed ■ Power Adapter ■ Eject Button for Easy Removal of Hard Drive ■ User’s Manual ■ Compatible with 2.5” or 3.5” SATA I/II Hard Drive ■ Maximum Transfer Rates Up to 5 Gbps w/USB 3.0 Speci cations : ■ Model : NST-D300S3 ■ Maximum Transfer Rates Up to 480 Mbps w/USB 2.0 ■ Device Support : SATA
Inhaltszusammenfassung zur Seite Nr. 5
4.Installation 1. Connect the power adapter to the NexStar® Hard Drive Dock. 2. Connect the USB 3.0 Cable to the NexStar® Hard Drive Dock and attach the other end to your computer. Power Cable USB 3.0 Cable 4
Inhaltszusammenfassung zur Seite Nr. 6
3. Insert 2.5” or 3.5” SATA HDD into the slot. 5
Inhaltszusammenfassung zur Seite Nr. 7
3-1. When the eject button is upright, the NexStar® Hard Drive Dock is ready for use. 6
Inhaltszusammenfassung zur Seite Nr. 8
4.Removal Warning: Please push power button & turn o unit before removing the hard drive! 1. First, safely remove the USB HDD device from your computer operating system. 2. Once safe removal has been completed, proceed to turn o the power to the Hard Drive Dock and eject the HDD. (Stablize the HDD with your hand) 7
Inhaltszusammenfassung zur Seite Nr. 9
3. Remove the HDD from the Hard Drive Dock. 8
Inhaltszusammenfassung zur Seite Nr. 10
6.Creating a Partition For Windows® XP/Vista/7 Users: 1. Right click on “My Computer” and choose “Manage”. 2. Under “Storage” on the LEFT pane, select “Disk Management”. 3. Windows should now give you the option to initialize the disk. If not, locate the new disk, right-click on the new disk (where it reades “Disk #”) and choose Initialize. This step may not be required for some hard drives. 4. Go through the wizard. 5. Once complete, locate your hard drive in the bottom right pane. Right-cli
Inhaltszusammenfassung zur Seite Nr. 11
WARNING: Doing the following setup will erase any existing data on the drive. 6. Follow the directions of the wizard. The recommended type is “primary” and the recommended le system is “NTFS.” Please note that Windows® XP/Vista/7 limits FAT32 partitions to only 32GB. 7. Windows Disk Management will format and partition the disk according to your settings. Please allow some time for the partition and format to complete. 8. Once completed, your drive will appear in My Computer or in Window Expl
Inhaltszusammenfassung zur Seite Nr. 12
WARNING: Doing the following setup will erase any existing data on the drive. 6. From the Volume Scheme menu, choose the desired number of partitions (Mac OS 10.x gives you the option of dividing the drive into at most 16 partitions). You may adjust the size of each partition using the slide bar between the partitions in the Volume Scheme area. 7. In the Volume Information section, enter the desired name for each volume (partition). You may choose one of the following volume format (Mac OS Ex
Inhaltszusammenfassung zur Seite Nr. 13
7. Warranty The NexStar® SuperSpeed USB 3.0 Hard Drive Dock comes with a 1 year limited warranty (90 day parts). If your unit becomes defective within that time frame, please go to http://www.vantecusa.com for information on how to receive warranty exchange or repair. Cosmetic defects and missing parts are not covered under this warranty. Please check the contents of the unit to make sure you received all parts. Also check for any cosmetic aws. If any parts are missing or if there are cosme
