Bedienungsanleitung Pioneer PRV-LX1

Inhaltszusammenfassung zur Seite Nr. 1

TECHNICAL INFORMATION BULLETIN TIB # 190112
PRV-LX1 – General Maintenance Practices


OVERVIEW:
The PRV-LX1 is a professional-level DVD recorder designed to provide many hours of video
recording and playback performance. While every operating environment is unique, there are some
general maintenance practices you can follow to keep your PRV-LX1 running at optimal performance.
This document offers some general guidelines and maintenance recommendations for the PRV-LX1.
• Run a system

Inhaltszusammenfassung zur Seite Nr. 2

TIB #190112 2. Scroll down to the Setup menu using the arrow buttons. The first option, System, is highlighted. 3. Press Enter to access the System submenu. 4. Scroll down to highlight HDD Tools. 5. Scroll right and down to highlight Check. 6. Press the Enter button on the front panel to begin checking the HDD for errors. The HDD System Check executes and corrects recoverable errors. The check results appear on the monitor screen. The list reports fixed error as well as any se

Inhaltszusammenfassung zur Seite Nr. 3

TIB #190112 To determine when to replace versus clean filters, refer to the following chart: Clean The Filters Replace the Filters (Part # DEC2530) grime on filter cover can be wiped away cover or filter feels greasy to the touch visible dirt on the filter is removable with any dirt or debris remains after wiping the a small vacuuming device cover or vacuuming the filter (available commercially) The replacement filter (P/N DEC2530) is available from the Pioneer Electronic Servi

Inhaltszusammenfassung zur Seite Nr. 4

TIB #190112 5. Pinch the air filter with your fingertips and pull it from the vent hole. 6. Insert the new filter so that the four cut-away portions align with the four ribs on the air intake. When installing a new filter, do not bend or fold the filter material. 7. Align the filter cover’s three hooks directly below the corresponding holes on the air intakes. 8. Hold the cover carefully into place. 9. Slide the filter cover back up into place. Confirm that the three hooks fasten

Inhaltszusammenfassung zur Seite Nr. 5

TIB #190112 If a filter cover is uneven, dust and other debris can enter the PRV-LX1. Attempting to replace the cover when the filter is protruding from the air intake may damage the unit. Do not power on the PRV-LX1 until both the filter and cover are seated properly. DVD Drive Usage Check/Replacement Periodically check the READ/WRITE HOURS on the DVD drives (DVD 1 and DVD 2). The PRV-LX1 drives are designed for reliability and high performance. However, operating environments, espec