Inhaltszusammenfassung zur Seite Nr. 1
Hardware Reference Guide
HP Compaq t5135/t5530 Thin Clients
Inhaltszusammenfassung zur Seite Nr. 2
© Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or om
Inhaltszusammenfassung zur Seite Nr. 3
About This Book WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE Text set off in this manner provides important supplemental information. ENWW iii
Inhaltszusammenfassung zur Seite Nr. 4
iv About This Book ENWW
Inhaltszusammenfassung zur Seite Nr. 5
Table of contents 1 Product features Standard features ................................................................................................................................. 1 Front panel components ....................................................................................................................... 2 Secure USB compartment ports ........................................................................................................... 2 Rear panel components ......
Inhaltszusammenfassung zur Seite Nr. 6
Non-supported orientation .................................................................................................................. 24 7 Electrostatic discharge Preventing electrostatic damage ........................................................................................................ 26 Grounding methods ............................................................................................................................ 27 8 Shipping information Shipping preparatio
Inhaltszusammenfassung zur Seite Nr. 7
1 Product features Standard features Thank you for purchasing an HP Compaq thin client. We hope you have years of use from our t5135 or t5530 thin clients. Our goal is to provide you with award-winning clients that are easy to deploy and manage with the power and reliability you expect. HP has partnered with Altiris to manage HP Compaq thin clients. Altiris Deployment Solution is a leading- edge tool to help with quick deployment and for ongoing management of the thin clients in your organizatio
Inhaltszusammenfassung zur Seite Nr. 8
Front panel components Figure 1-1 Front panel components (1) Secure USB compartment (5) Line-out (headphone) audio connector (2) Power button (6) Line-in (microphone) connector (3) Flash activity LED (7) Universal serial bus (USB) connectors (2) (4) Power LED * For more information, refer to the model-specific QuickSpecs at http://h18004.www1.hp.com/products/quickspecs/ QuickSpecs_Archives/QuickSpecs_Archives.html Secure USB compartment ports Figure 1-2 Secure USB compartment ports The secur
Inhaltszusammenfassung zur Seite Nr. 9
Rear panel components Figure 1-3 Rear panel components (1) Cable lock slot (5) PS/2 connectors (2) (2) Ethernet RJ-45 connector (6) Monitor connector (3) Parallel connector (7) Serial connector (4) Universal serial bus (USB) connectors (4) (8) Power connector For more information, see the model-specific QuickSpecs at http://h18004.www1.hp.com/products/quickspecs/ QuickSpecs_Archives/QuickSpecs_Archives.html ENWW Rear panel components 3
Inhaltszusammenfassung zur Seite Nr. 10
Installing the stand To install the stand: 1. Turn unit upside down. 2. Locate the slots on the bottom of the unit into which the tabs on the stand fit. 3. Insert the tabs into the slots (1), and then slide the stand about 1/2–inch toward the back of the unit until it locks into place (2). Figure 1-4 Installing the stand Removing the stand To remove the stand: 1. Turn unit upside down. 2. Press the tab (1), and then slide the stand about 1/2–inch toward the front of the unit and lift the stand
Inhaltszusammenfassung zur Seite Nr. 11
Using the keyboard Figure 1-6 Keyboard features (1) Caps Lock key Activates/deactivates the Caps Lock feature. (2) Scroll Lock key Activates/deactivates the Scroll Lock feature. (3) Num Lock key Activates/deactivates the Num Lock feature. (4) Ctrl key Use in combination with another key; its function depends on the application software you are using. 1 (5) Opens the Start menu in Microsoft Windows. Use in combination with Windows Logo Key other keys to perform other functions. For more informat
Inhaltszusammenfassung zur Seite Nr. 12
Windows Logo Key Use the Windows Logo Key in combination with other keys to perform certain functions available in Windows operating systems. Windows Logo Key + Tab Switch between open items. Windows Logo Key + e Open My Computer. Windows Logo Key + f Search for a file or folder. Windows Logo Key + Ctrl + f Search for computers. Windows Logo Key + m Minimize all windows. Windows Logo Key + Shift + m Undo minimize all. Windows Logo Key + Break Display the System Properties dialog box. Windows Log
Inhaltszusammenfassung zur Seite Nr. 13
Serial number location Every thin client includes a unique serial number located as shown in the following illustration. Have this number available when contacting HP customer service for assistance. Figure 1-7 Serial number location ENWW Serial number location 7
Inhaltszusammenfassung zur Seite Nr. 14
2 Hardware changes General hardware installation sequence To ensure the proper installation thin client hardware components: 1. Back up any data, if necessary. 2. If the thin client is powered on: a. Turn the unit and any other attached devices off. b. Disconnect the power cord from the wall outlet. c. Disconnect any external devices or cables. WARNING! To reduce the risk of personal injury from electrical shock and/or hot surfaces, be sure to disconnect the power cord from the wall outlet and a
Inhaltszusammenfassung zur Seite Nr. 15
NOTE You can download select hardware drivers from HP at http://www.hp.com/country/ us/eng/support.html. 8. Reconfigure the thin client, if necessary. ENWW General hardware installation sequence 9
Inhaltszusammenfassung zur Seite Nr. 16
Installing USB devices in the secure USB compartment The secure USB compartment allows you to install two USB devices in a secure location inside of the thin client. Along with providing a hidden location, the secure USB compartment can be locked by the optional security cable lock. CAUTION The ambient temperature inside of the secure USB compartment can reach up to 55°C in worst case conditions. Make sure the specifications for any device you install in the compartment indicate the device can t
Inhaltszusammenfassung zur Seite Nr. 17
Installing the USB device ▲ Insert the USB device into the USB port in the secure USB compartment. See the following illustration for the location of the ports in the secure USB compartment. Figure 2-2 Secure USB compartment port location Replacing the secure USB compartment cover To replace the secure compartment cover: 1. Place the cover on top of the unit so it is offset about 1/2–inch toward the rear of the unit, allowing the tabs on the cover to align and insert into the slots on the chass
Inhaltszusammenfassung zur Seite Nr. 18
Replacing the battery Before beginning the replacement process, review General hardware installation sequence for procedures you should follow before and after installing or replacing hardware. To replace the battery: 1. Remove the side access panel and metal side cover 2. Remove and replace the battery 3. Replace the metal side cover and side access panel Removing the side access panel and metal side cover WARNING! Before removing the side access panel, ensure that the thin client is turned off
Inhaltszusammenfassung zur Seite Nr. 19
2. Lift the metal side cover up and off the unit (2). Figure 2-5 Removing the metal side cover Removing and replacing the battery To remove and replace the battery: 1. Locate the battery on the system board. 2. Pull back on the clip (1) that is holding the battery in place, and then remove the battery (2). Figure 2-6 Removing and replacing the internal battery 3. Insert the new battery and position the clip back into place. Replacing the metal side cover and side access panel To replace the me
Inhaltszusammenfassung zur Seite Nr. 20
2. Insert and tighten the three screws. Figure 2-7 Replacing the metal side cover To replace the access panel: 1. Place the access panel on the side of the unit, offset about 1/2–inch toward the front of the unit (1). 2. Slide the panel toward the rear of the unit until it locks into place (2). 3. Replace the two screws that secure the access panel to the chassis (3). Figure 2-8 Replacing the side access panel External drives Various external USB drives are available as options for the t5135/t
