Inhaltszusammenfassung zur Seite Nr. 1
®
P3V133
PC133 Motherboard
USER’S MANUAL
Inhaltszusammenfassung zur Seite Nr. 2
USER'S NOTICE No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”). ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EI- THER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED W
Inhaltszusammenfassung zur Seite Nr. 3
ASUS CONTACT INFORMATION ASUSTeK COMPUTER INC. (Asia-Pacific) Marketing Address: 150 Li-Te Road, Peitou, Taipei, Taiwan 112 Telephone: +886-2-2894-3447 Fax: +886-2-2894-3449 Email: info@asus.com.tw Technical Support MB/Others (Tel): +886-2-2890-7121 (English) Notebook (Tel): +886-2-2890-7122 (English) Desktop/Server (Tel):+886-2-2890-7123 (English) Fax: +886-2-2895-9254 Email: tsd@asus.com.tw WWW: www.asus.com.tw FTP: ftp.asus.com.tw/pub/ASUS ASUS COMPUTER INTERNATIONAL (America) Marketing Addre
Inhaltszusammenfassung zur Seite Nr. 4
CONTENTS 1. INTRODUCTION 7 1.1 How This Manual Is Organized ................................................... 7 1.2 Item Checklist .............................................................................. 7 2. FEATURES 8 2.1 The ASUS P3V133 ...................................................................... 8 2.1.1 Specifications ..................................................................... 8 2.1.2 Special Features .............................................................
Inhaltszusammenfassung zur Seite Nr. 5
CONTENTS 4.3 Main Menu ................................................................................. 48 4.3.1 Primary & Secondary Master/Slave ................................. 49 4.4 Advanced Menu ......................................................................... 54 4.4.1 Chip Configuration ........................................................... 56 4.4.2 I/O Device Configuration ................................................. 58 4.4.3 PCI Configuration .........................
Inhaltszusammenfassung zur Seite Nr. 6
FCC & DOC COMPLIANCE Federal Communications Commission Statement This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provid
Inhaltszusammenfassung zur Seite Nr. 7
1. INTRODUCTION 1.1 How This Manual Is Organized This manual is divided into the following sections: 1. INTRODUCTION Manual information and checklist 2. FEATURES Production information and specifications 3. HARDWARE SETUP Instructions on setting up the motherboard. 4. BIOS SETUP Instructions on setting up the BIOS 5. SOFTWARE SETUP Instructions on setting up the included software 6. SOFTWARE REFERENCE Reference material for the included software 7. APPENDIX Optional items and general reference
Inhaltszusammenfassung zur Seite Nr. 8
2. FEA TURES Specifications 2. FEATURES 2.1 The ASUS P3V133 The ASUS P3V133 motherboard is carefully designed for the demanding PC user who wants advanced features processed by the fastest processors. 2.1.1 Specifications • Latest Intel Processor Support ® Intel Pentium III 100MHz FSB, Katmai core SECC2 ® Intel Pentium III B 133MHz FSB, Katmai core SECC2 ® Intel Pentium III E 100MHz FSB, Coppermine core SECC2 ® III EB 133MHz FSB, Coppermine core SECC2 Intel Pentium ® Intel Pentium II 100MHz/6
Inhaltszusammenfassung zur Seite Nr. 9
2. FEATURES • SMBus: Features the System Management Bus interface, which is used to physi- cally transport commands and information between SMBus devices. • PCI/ISA Expansion Slots: Provides four 32-bit PCI (Rev. 2.2) expansion slots, which can support Bus Master PCI cards, such as SCSI or LAN cards (PCI supports up to 133MB/s maximum throughput) and three 16-bit ISA slots. • Super Multi-I/O: Provides two high-speed UART compatible serial ports and one parallel port with EPP and ECP capabiliti
Inhaltszusammenfassung zur Seite Nr. 10
2. FEA TURES Performance 2. FEATURES 2.1.2 Special Features • ACPI Ready: Advanced Configuration Power Interface (ACPI) provides more Energy Saving Features for operating systems that support OS Direct Power Management (OSPM) functionality. With these features implemented in the OS, PCs can be ready around the clock, yet satisfy all the energy saving standards. To fully utilize the benefits of ACPI, an ACPI-supported OS, such as Windows 98 must be used. • Easy Installation: Incorporates BIOS t
Inhaltszusammenfassung zur Seite Nr. 11
2. FEATURES 2.1.4 Intelligence • Auto Fan Off: The system fans will power off automatically even in sleep mode. This function reduces both energy consumption and system noise, and is an important feature in implementing silent PC systems. • Dual Function Power Button: Pushing the power button for less than 4 sec- onds when the system is in the working state places the system into one of two states: sleep mode or soft-off mode, depending on the BIOS or OS setting (see PWR Button < 4 Secs in 4.5
Inhaltszusammenfassung zur Seite Nr. 12
2. FEA TURES MB Components 2. FEATURES 2.2 P3V133 Motherboard Components See opposite page for locations. Location Processor Support Slot 1 for Coppermine/Katmai/Mendecino Processors ...... 2 66MHz to 150MHz bus support (16 external clock settings) Chipsets VIA VT82C693A System Controller.............................. 3 VIA VT82C596B PCI to ISA Bridge ............................. 9 2 Mbit Programmable Flash EEPROM ........................ 12 Multi-I/O and Keyboard Controller .................
Inhaltszusammenfassung zur Seite Nr. 13
2. FEATURES P3V133 Motherboard Components Locations 1 2 3 4 5 6 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 ASUS P3V133 User’s Manual 13 2. FEA TURES Component Locations
Inhaltszusammenfassung zur Seite Nr. 14
3. H/W SETUP Motherboard Layout 3. HARDWARE SETUP 3.1 P3V133 Motherboard Layout 19.2cm (7.6in) PWR_FAN TOP: CPU_FAN PS2 Mouse BOTTOM: KBMS Keyboard KBPWR TOP: USB 1 USB BOTTOM: USB 2 COM1 BUS FREQ FS3 FS2 FS1 FS0 VIA MS0 VT82C693A Chipset MS1 COM2 VIO VCORE 0 1 2 3 4 5 Row JTCPU Accelerated Graphics Port WOL_CON PCI Slot 1 CR2032 3V Multi-I/O Lithium Cell CHA_FAN (CMOS Power) PCI Slot 2 CLRTC CHASIS PCI Slot 3 VIA VT82C596B WOR PCIset BF3 JTPWR BF2 PCI Slot 4 BF1 BF0 FREQ MULT ISA Slot
Inhaltszusammenfassung zur Seite Nr. 15
3. HARDWARE SETUP 3.2 Layout Contents Motherboard Settings 1) KBPWR p. 16 Keyboard Power Up Setting (Disable/Enable) 2) VIO p. 17 I/O Voltage Setting (Normal/Test) 3) VCORE p. 17 Core Voltage Setting (Normal/Test) 4) FS0, FS1, FS2, FS3 p. 18 CPU External Clock (BUS) Frequency Selection 5) MS0, MS1 p. 18 CPU:PCI Bus Frequency Setting 6) BF0, BF1, BF2, BF3 p. 19 CPU Core:BUS Frequency Multiple Expansion Slots/Sockets 1) System Memory p. 20 System Memory Support 2) DIMM1, DIMM2 p. 21 DIMM Memory Mo
Inhaltszusammenfassung zur Seite Nr. 16
3. H/W SETUP Layout Contents 3. HARDWARE SETUP 3.3 Hardware Setup Steps Before using your computer, you must complete the following steps: 1. Check Motherboard Settings 2. Install Memory Modules 3. Install the Central Processing Unit (CPU) 4. Install Expansion Cards 5. Connect Ribbon Cables, Panel Wires, and Power Supply 6. Setup the BIOS Software 3.4 Motherboard Settings This section explains in detail how to change your motherboard’s function settings through the use of switches and/or jumpers
Inhaltszusammenfassung zur Seite Nr. 17
3. HARDWARE SETUP 2. I/O Voltage Setting (VIO) This jumper allows you to select the voltage supplied to the DRAM, chipset, AGP, and the CPU’s I/O buffer. IMPORTANT: Setting this jumper to Test may reduce system life. Leave on de- fault setting of Normal. VIO 3 3 2 2 1 1 Normal Test (Default) P3V133 R P3V133 Input/Output Voltage Selection 3. Voltage Regulator Output Setting (VCORE) This jumper sets the core voltage supplied to the microprocessor. VCORE 3 3 2 2 1 1 Normal Test (Default) R P3V133 P
Inhaltszusammenfassung zur Seite Nr. 18
3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 4. CPU Bus Frequency Selection (FS0, FS1, FS2, FS3) This option tells the clock generator what frequency to send to the CPU, DRAM, and motherboard chipset. This allows the selection of the CPU’s External frequency (or BUS Clock). The BUS Clock multiplied by the BUS Multiple equals the CPU’s Inter- nal frequency (the advertised CPU speed). 123 123 123 123 123 123 FS3 FS2 FS1 FS0 CPU 66.8MHz 75.0MHz 83.30MHz 100.30MHz103.00MHz 105MHz PCI 33.4MHz
Inhaltszusammenfassung zur Seite Nr. 19
3. HARDWARE SETUP 6. CPU Core:BUS Frequency Multiple (BF0, BF1, BF2, BF3) This option sets the frequency multiple between the Internal frequency of the CPU and the CPU’s External frequency. These must be set in conjunction with the CPU Bus Frequency. 13 2 132 13 2 132 132 BF3 BF2 BF1 BF0 2.0x (2/1) 2.5x (5/2) 3.0X (3/1) 3.5X (7/2) 4.0X (4/1) 13 2 13 2 13 2 132 13 2 BF3 BF2 BF1 BF0 4.5X (9/2) 5.5x (11/2) 6.0x (6/1) 6.5X (13/2) 5.0X (5/1) R P3V133 13 2 13 2 13 2 BF3 BF2 P3V133 CPU Core:BUS BF1 Fre
Inhaltszusammenfassung zur Seite Nr. 20
3. H/W SETUP System Memory 3. HARDWARE SETUP 3.5 System Memory (DIMM) This motherboard uses only Dual Inline Memory Modules (DIMMs). Three sockets are available for 3.3Volt (power level) unbuffered Synchronous Dynamic Random Access Memory (SDRAM) of either 8, 16, 32, 64, 128, 256, or 512MB to form a memory size between 8MB to 1.5GB. One side (with memory chips) of the DIMM takes up one row on the motherboard. This motherboard also supports NEC’s Virtual Channel (VC) SDRAMs. To utilize the chips
