Bedienungsanleitung Black Box IC181C

Bedienungsanleitung für das Gerät Black Box IC181C

Gerät: Black Box IC181C
Kategorie: Computerausrüstung
Produzent: Black Box
Größe: 0.16 MB
Datum des Hinzufügens: 9/13/2014
Seitenanzahl: 17
Anleitung drucken

Herunterladen

Wie kann man es nutzen?

Unser Ziel ist Ihnen einen schnellen Zugang zu Inhalten in Bedienungsanleitungen zum Gerät Black Box IC181C zu garantieren. Wenn Sie eine Online-Ansicht nutzten, können Sie den Inhaltsverzeichnis schnell durchschauen und direkt zu der Seite gelangen, auf der Sie die Lösung zu Ihrem Problem mit Black Box IC181C finden.

Für Ihre Bequemlichkeit

Wenn das direkte Durchschauen der Anleitung Black Box IC181C auf unserer Seite für Sie unbequem ist, können sie die folgende zwei Möglichkeiten nutzen:

  • Vollbildsuche – Um bequem die Anleitung durchzusuchen (ohne sie auf den Computer herunterzuladen) können Sie den Vollbildsuchmodus nutzen. Um das Durchschauen der Anleitung Black Box IC181C im Vollbildmodus zu starten, nutzen Sie die Schaltfläche Vollbild
  • Auf Computer herunterladen – Sie können die Anleitung Black Box IC181C auch auf Ihren Computer herunterladen und sie in Ihren Sammlungen aufbewahren. Wenn Sie jedoch keinen Platz auf Ihrem Gerät verschwenden möchten, können Sie sie immer auf ManualsBase herunterladen.
Black Box IC181C Handbuch - Online PDF
Advertisement
« Page 1 of 17 »
Advertisement
Druckversion

Viele Personen lesen lieber Dokumente nicht am Bildschirm, sondern in gedruckter Version. Eine Druckoption der Anleitung wurde ebenfalls durchdacht, und Sie können Sie nutzen, indem Sie den Link klicken, der sich oben befindet - Anleitung drucken. Sie müssen nicht die ganze Black Box IC181C Anleitung drucken, sondern nur die Seiten, die Sie brauchen. Schätzen Sie das Papier.

Zusammenfassungen

Unten finden Sie Trailer des Inhalts, der sich auf den nächsten Anleitungsseiten zu Black Box IC181C befindet. Wenn Sie den Seiteninhalt der nächsten Seiten schnell durchschauen möchten, können Sie sie nutzen.

Inhaltszusammenfassungen
Inhaltszusammenfassung zur Seite Nr. 1

JUNE 2000
IC111C
IC181C
Four Port RS-232 Serial Interface
CUSTOMER Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX
FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
SUPPORT
Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
INFORMATION
Web site: www.blackbox.com • E-mail: info@blackbox.com

Inhaltszusammenfassung zur Seite Nr. 2

FOUR PORT RS-232 SERIAL INTERFACE FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio frequency energy a nd if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part

Inhaltszusammenfassung zur Seite Nr. 3

FOUR PORT RS-232 SERIAL INTERFACE Contents Chapter Page 1. Specifications...................................................................................................1 2. Introduction ....................................................................................................2 2.1 Overview..................................................................................................2 2.2 What’s Included.........................................................................

Inhaltszusammenfassung zur Seite Nr. 4

CHAPTER 1: Specifications 1. Specifications Protocol — Asynchronous Number of Ports — 4 Speed — IC111C: Up to 115.2 Kbps; IC181C: 460.8 kbps and higher Operation — RS-232 Connectors — DB37M on card; (1) 3-ft. (0.9-m) DB37F-to-4x DB25M octopus cable, included Maximum Distance — 50 ft. (15.2 m) @ 19.2 Kbps with 2500 pF max. cable capacitance (lower capacitance will allow greater distances) Communications Chip — IC111C: 16550 UART; IC181C: 16850 UART MTBF — >150,000 hours MTTR — <0.25 hours ® Mat

Inhaltszusammenfassung zur Seite Nr. 5

FOUR PORT RS-232 SERIAL INTERFACE 2. Introduction 2.1 Overview The Four Port RS-232 Serial Interface provides your PC system with four RS- 232 asynchronous ports. Connect to any device that uses the RS-232 protocol, such as modems, data-entry terminals, and plotters. The Serial Interface also includes a serial utility diskette with Seacom, a DOS interrupt and driver package. Seacom allows data to be buffered, eliminating data loss in high-speed data transfers. It also allows more than 4 ports

Inhaltszusammenfassung zur Seite Nr. 6

CHAPTER 2: Introduction 2.3 Features Listed below are the special features your Serial Interface offers. • Each port is independently addressable. • Eleven interrupt options, including AT interrupts, for simple integration into existing systems. • IRQs can be shared or individually set for each port. • Supports Interrupt Sharing—only one interrupt line required for multiple ports. • Supports any character set defined by binary notation. • 16550 UARTs (IC111C) or 16850 UARTs (IC181C) help ensur

Inhaltszusammenfassung zur Seite Nr. 7

FOUR PORT RS-232 SERIAL INTERFACE 2.4 Technical Description The Four Port RS-232 Serial Interface provides four additional serial ports for terminals, modems, printers, etc. The Serial Interface can be configured as COM1: through COM4:, or as any other I/O address (up to 3FF Hex), providing total compatibility with most communications software and languages. The Four Port RS-232 Serial Interface (IC111C) uses the 16550 UART chip, which features programmable baud rate, data format, interrupt con

Inhaltszusammenfassung zur Seite Nr. 8

CHAPTER 3: Address Selection 3. Address Selection NOTE Be sure to set the address selections and jumper options before installation. Each serial port on the Four Port RS-232 Serial Interface occupies 8 con- secutive I/O locations. DIP switch SW4 sets the base address for Port 1, SW3 for Port 2, SW2 for Port 3, and SW1 for Port 4. Be careful when selecting the base address as some selections conflict with existing PC ports. The following table shows several examples that usually do not cause a c

Inhaltszusammenfassung zur Seite Nr. 9

FOUR PORT RS-232 SERIAL INTERFACE 4. Option Selection NOTE Be sure to set the address selections and jumper options before installation. The board contains several jumper straps for each port which must be set for proper operation. 4.1 Port Enable/Disable Each port on the Four Port RS-232 can be enabled or disabled with switch position 8 on the DIP switch. The port is enabled with the switch ON (or closed) and disabled when OFF (or open). If any port is disabled, be sure to also disable the in

Inhaltszusammenfassung zur Seite Nr. 10

CHAPTER 4: Option Selection Any two or more ports can share a common IRQ by placing the jumpers on the same IRQ setting, and setting the appropriate selections at E1. Consult your particular software for IRQ selection. If no interrupt is desired, remove the jumper. NOTE IRQ 2 on AT class machines is not available. IRQ 9 is substituted in place of IRQ 2. To select IRQ 9, place jumper in the IRQ 2 position. PORT 1 (COM1) E4 1 2 PORT 2 (COM2) E3 M S N M PORT 3 (COM3) E2 S N 3 4 E5 PORT 4 (COM4) E1

Inhaltszusammenfassung zur Seite Nr. 11

FOUR PORT RS-232 SERIAL INTERFACE 4.2 Interrupt-Mode Options Jumper E5 selects the interrupt mode for each port. Each port must be set in the correct mode to ensure proper installation. “N” indicates the normal, single interrupt per port mode (Figure 4-2). “S” indicates the shared interrupt mode, which allows more than one port to access a single IRQ (Figure 4-4). “M” indicates the inclusion of a 1K ohm pull-down resistor required on one port when sharing interrupts (Figure 4-3). 1 2 M S N M

Inhaltszusammenfassung zur Seite Nr. 12

CHAPTER 4: Option Selection Set jumper to “S” if you are using more than one Four Port RS-232 Serial Interface in a bus or you wish to remove the pull-down resistor completely for hardware compatibility. NOTE Setting the board in this configuration when it is not accompanied by a pull-down resistor will prevent the ports from triggering an interrupt. The factory default for this board is COM1: and COM3: sharing IRQ4, and COM2: and COM4: sharing IRQ3. 1 2 M S N M S N 3 4 Figure 4- 4. E5, sharin

Inhaltszusammenfassung zur Seite Nr. 13

FOUR PORT RS-232 SERIAL INTERFACE 5. Installation IMPORTANT You MUST set up the operating system BEFORE you physically install the Card. 5.1 Software Installation ® If you are installing an ISA adapter in DOS, OS/2 , or QNX, please refer to the appropriate directory on one of the Serial Utilities Disks for instructions. 5.1.1 WINDOWS 3.1X Please refer to the /WINDOWS sub-directory on the Serial Utilities Diskette for help files and current information on the installation of the Card in this

Inhaltszusammenfassung zur Seite Nr. 14

CHAPTER 5: Installation 5.2 Hardware Installation The ISA Card can be installed in any of the PC expansion slots. The Card contains several jumper straps for each port that you must set for proper operation. 1. Turn off PC power. Disconnect the power cord. 2. Remove the PC case cover. 3. Locate an available slot and remove the blank metal slot cover. 4. Gently insert the Card into the slot. Make sure that the Card is seated properly. 5. Replace the screw. 6. Replace the cover. 7. Connect the po

Inhaltszusammenfassung zur Seite Nr. 15

ON=0 A9 A3 E PORT 1 PORT 1 PORT 1 PORT 2 PORT 2 PORT 2 12 M S N M PORT 3 S N PORT 3 3 4 PORT 3 PORT 4 PORT 4 PORT 4 + FOUR PORT RS-232 SERIAL INTERFACE Appendix A: Circuit-Board Design 3.9" C1 C2 U4 U1 U2 U3 SW1 SW2 SW3 SW4 R2 R3 R4 R1 R5 D4 R6 R7 D1 R8 D2 E5 E1 E2 E3 E4 D3 C3 2 2 2 2 3 3 U6 3 3 4 4 R9 4 4 5 5 5 5 6 6 6 6 7 7 7 7 10 10 10 10 11 11 11 11 12 12 12 12 15 15 15 15 U5 C4 C5 C6 C7 U7 U8 U9 U10 P2 8.66" C9 C10 C8 U12 Y1 U13 U14 P1 C12 C13 U11 C11 U18 C19 C14 U17 U16 = User U15 P3 C15

Inhaltszusammenfassung zur Seite Nr. 16

APPENDIX B: Troubleshooting Appendix B. Troubleshooting By using the supplied serial utility diskette and following these simple steps, most common problems can be eliminated. 1) Identify all I/O adapters currently installed in your system. This includes your onboard serial ports, controller cards, and sound cards. The I/O address used by these adapters, as well as the IRQ (if any) should be identified. 2) Configure your serial interface so that there is no conflict with currently installed adap

Inhaltszusammenfassung zur Seite Nr. 17

© Copyright 2000. Black Box Corporation. All rights reserved. 1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746


Ähnliche Anleitungen
# Bedienungsanleitung Kategorie Herunterladen
1 Black Box ACS261A-SM Handbuch Computerausrüstung 3
2 Black Box ACX160-PS Handbuch Computerausrüstung 0
3 Black Box ACS250A-R2 Handbuch Computerausrüstung 4
4 Black Box ACX160 Handbuch Computerausrüstung 2
5 Black Box JPM820A Handbuch Computerausrüstung 0
6 Black Box 5-Port POE+ Gigabit Ethernet Switch Handbuch Computerausrüstung 0
7 Black Box ServSwitch Brand KVM Extender Handbuch Computerausrüstung 0
8 Black Box ACXIO8-SM Handbuch Computerausrüstung 0
9 Black Box AC300A-RX Handbuch Computerausrüstung 0
10 Black Box HDMCII VDSL2 LAN Extender Module (Extended Temp) Handbuch Computerausrüstung 1
11 Black Box ACS20001A-R3 Handbuch Computerausrüstung 0
12 Black Box hardened pol poe ethernet extenders Handbuch Computerausrüstung 0
13 Black Box 802.3af PoE Gigabit Injector, 1-Port Handbuch Computerausrüstung 1
14 Black Box IC175C Handbuch Computerausrüstung 0
15 Black Box Ethernet NIC Handbuch Computerausrüstung 0
16 Sony MSAKIT-PC4A Handbuch Computerausrüstung 2
17 Sony MRW62E-S1 2694866142 Handbuch Computerausrüstung 5
18 Philips MATCH LINE 9596 Handbuch Computerausrüstung 17
19 Sony 64GB SDHC Class 10 Memory Card Readers SF32UY Handbuch Computerausrüstung 1
20 Philips PSC702 Handbuch Computerausrüstung 1