Inhaltszusammenfassung zur Seite Nr. 1
4-073-971-14(1)
Color Graphic Display
21 inch model
US
Operating Instructions
FR
Mode d’emploi
DE
Bedienungsanleitung
ES
Manual de instrucciones
IT
Instruzioni per l’uso
Inhaltszusammenfassung zur Seite Nr. 2
Owner’s Record NOTICE This notice is applicable for USA/Canada only. The model and serial numbers are located at the rear of the unit. If shipped to USA/Canada, install only a UL LISTED/CSA Record these numbers in the spaces provided below. Refer to them LABELLED power supply cord meeting the following whenever you call upon your dealer regarding this product. specifications: Model No. Serial No. SPECIFICATIONS Plug Type Nema-Plug 5-15p Cord
Inhaltszusammenfassung zur Seite Nr. 3
Table of Contents Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Step 1: Connect your monitor to your computer . . . . . . . . . . . . . . . 6 Step 2: Connect the power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Step 3: Turn on the monitor and
Inhaltszusammenfassung zur Seite Nr. 4
Use of the tilt-swivel Precautions This monitor can be adjusted within the angles shown below. To turn the monitor vertically or horizontally, hold it at the bottom Warning on power connections with both hands. Use an appropriate power cord for your local power supply. Example of plug types 90° 15° 90° for 100 to 120 V AC for 200 to 240 V AC for 240 V AC only 5° Before disconnecting the power cord, wait at least 30 seconds after turning off the power to allow the static electricity on the
Inhaltszusammenfassung zur Seite Nr. 5
Identifying parts and controls See the pages in parentheses for further details. Front Rear AC IN (HD15) (HD15) 1 2 12 10 (reset) button (page 14) 9 Video input 1 connector (HD15) (y1) (page 6) This button resets the adjustments to the factory settings. This connector inputs RGB video signals (0.700 Vp-p, positive) and sync signals. 2 ASC (auto sizing and centering) button (page 7) This button automatically adjusts the size and centering of the 5 4 3 2 1 picture. 10 9 8 7 6 US 15 14 13 12 11 3t
Inhaltszusammenfassung zur Seite Nr. 6
Step 2:Connect the power cord Setup With the monitor and computer switched off, first connect the This monitor works with platforms running at horizontal proper power cord for your local power supply to the monitor, frequencies between 30 and 121 kHz. then connect it to a power outlet. Step 1:Connect your monitor to AC IN your computer (HD15) (HD15) 1 2 With the monitor and computer switched off, connect the video signal cable to the video input connector of the monitor and to the video ou
Inhaltszusammenfassung zur Seite Nr. 7
Selecting the on-screen menu Selecting the input signal language (LANGUAGE) You can connect two computers to this monitor using the video input 1 (y1) and video input 2 (y2) connectors. To select one English, French, German, Spanish, Italian, Dutch, Swedish, of the two computers, use the t switch. Russian and Japanese versions of the on-screen menus are available. The default setting is English. Move the t switch. The selected connector appears on the screen for 3 seconds. 1 Press the butto
Inhaltszusammenfassung zur Seite Nr. 8
7 LANGUAGE (page 7) L ANGUAGE Select LANGUAGE to choose the ENGL I SH Customizing Your Monitor FRANÇAIS on-screen menu’s language. DEUTSCH ESPAÑOL You can make numerous adjustments to your monitor using the ITAL IANO NEDERLANDS on-screen menu. SVENSKA Navigating the menu 8 OPTION (page 13) OPT ION Press the button to display the main MENU on your screen. Select OPTION to adjust the DEGAUSS monitor’s options. The options include: OK MENU ON degaussing the screen EX I T S I ZE / CENTER ch
Inhaltszusammenfassung zur Seite Nr. 9
x Using the , m/M, and
Inhaltszusammenfassung zur Seite Nr. 10
Adjusting the size of the picture Adjusting the shape of the picture (SIZE/CENTER) (GEOMETRY) This setting is stored in memory for the current input signal. The GEOMETRY settings allow you to adjust the rotation and shape of the picture. 1 Press the button. The (rotation) setting is stored in memory for all input signals. The main MENU appears on the screen. All other settings are stored in memory for the current input signal. 2 Press the m/M buttons to highlight SIZE/CENTER and press th
Inhaltszusammenfassung zur Seite Nr. 11
Adjusting the convergence Adjusting the quality of the picture (CONVERGENCE) (SCREEN) The CONVERGENCE settings allow you to adjust the quality of The SCREEN settings allow you to adjust the quality of the the picture by controlling the convergence. The convergence picture by controlling the moire and landing. refers to the alignment of the red, green, and blue color signals. If the color is irregular at the corners of the screen, adjust the If you see red or blue shadows around letters or l
Inhaltszusammenfassung zur Seite Nr. 12
EXPERT mode Adjusting the color of the picture You can make additional adjustments to the color in greater detail (COLOR) by selecting the EXPERT mode. COLOR The COLOR settings allow you to adjust the picture’s color EASY EXPERT s RGB temperature by changing the color level of the white color field. Colors appear reddish if the temperature is low, and bluish if the 5000K 6500K 930 0K R BIAS 50 temperature is high. This adjustment is useful for matching the G BIAS 50 B BIAS 50 monitor’s colo
Inhaltszusammenfassung zur Seite Nr. 13
sRGB mode Additional settings (OPTION) The sRGB color setting is an industry standard color space protocol designed to correlate the displayed and printed colors of You can manually degauss (demagnetize) the monitor, change the sRGB compliant computer products. To adjust the colors to the menu position, and lock the controls. sRGB profile, simply select the sRGB mode in the COLOR menu. However, in order to display the sRGB colors correctly (γ =2.2, 1 Press the button. 6500K), you must set
Inhaltszusammenfassung zur Seite Nr. 14
Resetting the adjustments Technical Features This monitor has the following three reset methods. Use the 0 (reset) button to reset the adjustments. Power saving function This monitor meets the power-saving guidelines set by VESA, ENERGY STAR, and NUTEK. If the monitor is connected to a computer or video graphics board that is DPMS (Display Power Management Signaling) compliant, the monitor will automatically reduce power consumption in three stages as shown below. Resetting a single adjustm
Inhaltszusammenfassung zur Seite Nr. 15
If OUT OF SCAN RANGE appears on the screen Troubleshooting INFORMAT ION MON I TOR I S WORK I NG INPUT 1:130.0kHz / 7 5H z Before contacting technical support, refer to this section. OUT OF SCAN RANGE CHANGE S I GNA L T I M I NG If thin lines appear on your screen WH I T E RED GREEN (damper wires) BLUE The lines you are experiencing on your screen are normal for the 1 The selected connector and the frequencies of the Trinitron monitor and are not a malfunction. These are shadows current input
Inhaltszusammenfassung zur Seite Nr. 16
Trouble symptoms and remedies If the problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction manual. Use the self-diagnosis function (page 18) if the following recommendations do not resolve the problem. Symptom Check these items No picture If the 1 (power) indicator is not lit Check that the power cord is properly connected. Check that the 1 (power) switch is in the “on” position. If the NO INPUT SIGNAL message Check that the t
Inhaltszusammenfassung zur Seite Nr. 17
Symptom Check these items Picture is ghosting Eliminate the use of video cable extensions and/or video switch boxes. Check that all plugs are firmly seated in their sockets. Picture is not centered or sized Press the button (page 7). properly Adjust the size (page 10) or centering (page 10). Note that some video modes do not fill the screen to the edges. Edges of the image are curved Adjust the geometry (page 10). Wavy or elliptical pattern (moire) Set CANCEL MOIRE to ON and adjus
Inhaltszusammenfassung zur Seite Nr. 18
Self-diagnosis function Specifications This monitor is equipped with a self-diagnosis function. If there is CRT 0.24 mm aperture grille pitch a problem with your monitor or computer(s), the screen will go 21 inches measured diagonally blank and the 1 (power) indicator will either light up green or 90-degree deflection flash orange. If the 1 (power) indicator is lit in orange, the FD Trinitron computer is in power saving mode. Try pressing any key on the Viewable image size Approx. 403.8 ×
Inhaltszusammenfassung zur Seite Nr. 19
Table des Matières Précautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identification des composants et des commandes . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 1re étape: Raccordez le moniteur à votre ordinateur. . . . . . . . . . . . 6 2e étape: Branchez le cordon d’alimentation . . . . . . . . . . . . . . . . . . 6 3e étape: Mettez le moniteur et l’ordinateur sous tensio
Inhaltszusammenfassung zur Seite Nr. 20
Entretien Précautions Nettoyez l’écran à l’aide d’un chiffon doux. Si vous utilisez un produit nettoyant pour vitres, n’utilisez aucun type de produit Avertissement sur le raccordement à la source contenant une solution antistatique ou des additifs similaires d’alimentation parce que vous risquez de rayer le revêtement de l’écran. Utilisez un cordon d’alimentation approprié en fonction de la Ne frottez pas, ne touchez pas et ne tapotez pas la surface de tension d’alimentation secteur lo
