Inhaltszusammenfassung zur Seite Nr. 1
masterpage:Right
D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US01COV-UC.fm
01US01COV-UC.book Page 1 Friday, October 22, 1999 10:19 AM
4-074-104-12 (1)
Trinitron Color
Computer Display
US
Operating Instructions
FR
Mode d’emploi
ES
Manual de instrucciones
CS
CPD-E400
© 1999 Sony Corporation
CPD-E400
4-074-104-12 (1)
Inhaltszusammenfassung zur Seite Nr. 2
masterpage:Left D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US02GET-UC.fm 01US01COV-UC.book Page 2 Friday, October 22, 1999 10:19 AM Owner’s Record Hinweise • Aus ergonomischen Gründen wird empfohlen, die The model and serial numbers are located at the rear of the unit. Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden Record these numbers in the spaces provided below. Refer to them (schlechte Erkennbarkeit, Augenbelastung bei zu geringem whenever you call upon your dealer re
Inhaltszusammenfassung zur Seite Nr. 3
masterpage:Toc.master D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US01COV-UCTOC.fm 01US01COV-UC.book Page 3 Friday, October 22, 1999 10:19 AM Table of Contents Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identifying parts and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Step 1: Connect your monitor to your computer . .
Inhaltszusammenfassung zur Seite Nr. 4
masterpage:Left D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 4 Friday, October 22, 1999 10:19 AM Use of the tilt-swivel Precautions This monitor can be adjusted within the angles shown below. To find the center of the monitor’s turning radius, align the center of Warning on power connections the monitor’s screen with the centering dots on the stand. • Use the supplied power cord. If you use a different power cord, Hold the monitor at the bottom with
Inhaltszusammenfassung zur Seite Nr. 5
masterpage:Right D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 5 Friday, October 22, 1999 10:19 AM Identifying parts and controls See the pages in parentheses for further details. Front Rear MENU RESET (HD15) 1 AC IN MENU RESET 1 RESET button (page 14) 4 AC IN connector (page 7) This button resets the adjustments to the factory settings. This connector provides AC power to the monitor. 2 Control button (page 9) 5 Video input 1 connector (HD15) (y1) (page
Inhaltszusammenfassung zur Seite Nr. 6
masterpage:Left D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 6 Friday, October 22, 1999 10:19 AM x Connecting to a Macintosh or compatible computer Setup Before using your monitor, check that the following accessories ( ) HD15 are included in your carton: 1 •Power cord AC IN • Current G3 adapter (for beige system) (1) • Setup Disk (1) • Warranty card • Notes on cleaning the screen’s surface • This instruction manual Step 1:Connect your monitor to Cu
Inhaltszusammenfassung zur Seite Nr. 7
masterpage:Right D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 7 Friday, October 22, 1999 10:19 AM Step 2:Connect the power cord Step 3:Turn on the monitor and computer With the monitor and computer switched off, first connect the power cord to the monitor, then connect it to a power outlet. First turn on the monitor, then turn on the computer. (HD15) 1 AC IN The installation of your monitor is complete. If necessary, use the monitor’s controls to adju
Inhaltszusammenfassung zur Seite Nr. 8
masterpage:Left D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 8 Friday, October 22, 1999 10:19 AM Selecting the on-screen menu Customizing Your Monitor language (LANG) You can make numerous adjustments to your monitor using the English, French, German, Spanish, Italian, Dutch, Swedish, on-screen menu. Russian and Japanese versions of the on-screen menus are available. The default setting is English. Navigating the menu 1 Press the center of the contr
Inhaltszusammenfassung zur Seite Nr. 9
the resolution of the current input signal masterpage:Right D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 9 Friday, October 22, 1999 10:19 AM x Using the control button 6 CONV (page 12) CONVERGENCE Selects the CONV menu to adjust 1 Display the main MENU. the picture’s horizontal and vertical Press the center of the control button to display the main 26 convergence. MENU on your screen. MENU 7 LANG (page 8) L ANGUAGE Selects the LANG menu to choose
Inhaltszusammenfassung zur Seite Nr. 10
masterpage:Left D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 10 Friday, October 22, 1999 10:19 AM Adjusting the brightness and Adjusting the centering of the contrast picture (CENTER) Brightness and contrast adjustments are made using a separate This setting is stored in memory for the current input signal. BRIGHTNESS/CONTRAST menu. These settings are stored in memory for all input signals. 1 Press the center of the control button. The main MENU appear
Inhaltszusammenfassung zur Seite Nr. 11
masterpage:Right D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 11 Friday, October 22, 1999 10:19 AM Adjusting the shape of the picture Adjusting the color of the picture (GEOM) (COLOR) The COLOR settings allow you to adjust the picture’s color The GEOM settings allow you to adjust the rotation and shape of temperature by changing the color level of the white color field. the picture. Colors appear reddish if the temperature is low, and bluish if the
Inhaltszusammenfassung zur Seite Nr. 12
masterpage:Left D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 12 Friday, October 22, 1999 10:19 AM Adjusting the convergence (CONV) Additional settings (OPTION) The CONV settings allow you to adjust the quality of the picture You can manually degauss (demagnetize) the monitor, adjust the by controlling the convergence. The convergence refers to the moire cancellation level, change the menu position, and lock the alignment of the red, green, and blue co
Inhaltszusammenfassung zur Seite Nr. 13
masterpage:Right D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 13 Friday, October 22, 1999 10:19 AM Locking the controls Helpful hints and information To protect adjustment data by locking the controls, first move the control button m/M to select (CONTROL (HELP) LOCK). Then move the control button ,, to select ON. The HELP menu contains helpful hints and information about this Only the 1 (power) switch, EXIT, and (CONTROL LOCK) monitor. If your mo
Inhaltszusammenfassung zur Seite Nr. 14
masterpage:Left D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 14 Friday, October 22, 1999 10:19 AM THIN HORIZONTAL LINE Resetting the adjustments The lines that appear on your screen are damper wires. See page 15 for more information about the damper wires. This monitor has the following three reset methods. Use the RESET button to reset the adjustments. DISTORTED SHAPE If the shape of the picture on the screen seems distorted, try RESET adjusting the
Inhaltszusammenfassung zur Seite Nr. 15
masterpage:Right D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 15 Friday, October 22, 1999 10:19 AM Technical Features Troubleshooting Before contacting technical support, refer to this section. Preset and user modes If thin lines appear on your screen When the monitor receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the (damper wires) monitor’s memory to provide a high quality picture at the c
Inhaltszusammenfassung zur Seite Nr. 16
masterpage:Left D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 16 Friday, October 22, 1999 10:19 AM Trouble symptoms and remedies If the problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction manual. Use the self-diagnosis function (page 18) if the following recommendations do not resolve the problem. Symptom Check these items No picture If the 1 (power) indicator is not lit • Check that the p
Inhaltszusammenfassung zur Seite Nr. 17
masterpage:Right D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 17 Friday, October 22, 1999 10:19 AM Symptom Check these items Picture is ghosting • Eliminate the use of video cable extensions and/or video switch boxes. • Check that all plugs are firmly seated in their sockets. Picture is not centered or sized • Adjust the size (page 10) or centering (page 10). Note that some video modes do not fill properly the screen to the edges. Edges of the image ar
Inhaltszusammenfassung zur Seite Nr. 18
masterpage:Left D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\01US03BAS-UC.fm 01US01COV-UC.book Page 18 Friday, October 22, 1999 10:19 AM Self-diagnosis function Specifications This monitor is equipped with a self-diagnosis function. If there is CRT 0.24 mm aperture grille pitch (center) a problem with your monitor or computer, the screen will go 19 inches measured diagonally blank and the 1 (power) indicator will either light up green or 90-degree deflection flash orange. If the 1 (powe
Inhaltszusammenfassung zur Seite Nr. 19
masterpage:Toc.master D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\02FR01COV-UCTOC.fm 01US01COV-UC.book Page 3 Friday, October 22, 1999 10:19 AM Table des Matières Précautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Identification des composants et des commandes . . . . . . . . . . . . . . 5 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 1re étape: Raccordez le moniteur à votre ordinateur. . . . . . . .
Inhaltszusammenfassung zur Seite Nr. 20
masterpage:Left D:\###sagyou\10 gatu\1022\407410412CPDE400_UC\02FR02BAS-UC.fm 01US01COV-UC.book Page 4 Friday, October 22, 1999 10:19 AM Entretien Précautions • Nettoyez l’écran à l’aide d’un chiffon doux. Si vous utilisez un produit nettoyant pour vitres, n’utilisez aucun type de produit Avertissement sur le raccordement à la source contenant une solution antistatique ou des additifs similaires d’alimentation parce que vous risquez de rayer le revêtement de l’écran. • Utilisez le cordon
