Inhaltszusammenfassung zur Seite Nr. 1
Table of Contents
Precautions .....................................................................................................................2
Package contents ............................................................................................................3
Installation instructions.................................................................................................3
Assembling the Monitor..................................................................
Inhaltszusammenfassung zur Seite Nr. 2
Precautions The monitor may be damaged if placed too near a source of heat. Be aware of the location of radiators, cookers, open fires etc. Do not cover the slots and openings on the back or top of the cabinet as the monitor requires ventilation. The monitor should be located in a well-ventilated room to prevent the possibility of overheating. Do not allow sharp objects such as knives, pens, or pencils near the screen. If such objects touch the screen, the LCD panel will be
Inhaltszusammenfassung zur Seite Nr. 3
Package contents LCD Monitor Power Cord Audio Cable VGA Cable AC/DC Adapter User Manual (CD) Quick Start Guide Installation instructions Assembling the Monitor 1. Put the base of monitor on the desk 2. Put the monitor on flat table or plate. carefully. 3
Inhaltszusammenfassung zur Seite Nr. 4
Repackage the Monitor Save the original box and packing material in case you have to ship or transport the monitor. Repackage the monitor: 1. Unplug the power cord to make sure the power is off. 2. Put the monitor into carton carefully. Important To find a clean and flat surface table place the monitor . To select clean and dry clothes put under the monitor for avoiding scratches. Adjusting the Viewing Angle The viewing angle of the monitor
Inhaltszusammenfassung zur Seite Nr. 5
Connecting the Devices Caution: Make sure that the computer and the monitor are both disconnected from the power supply. AC/DC Adapter Connect the plug of the AC/DC adapter to the (DC IN ) socket of the With power cord monitor , then be insert the power cord into the adapter and a properly grounded electric socket. VGA Cable Connect the signal cable to the VGA input socket (VGA IN) of the monitor , and connect the signal cable to the VGA output socket of the graphics card o
Inhaltszusammenfassung zur Seite Nr. 6
Adjusting display settings External Controls Power on/off 1 Blue: power on POWER ○ Orange: in sleep mode Press to view OSD. OSD 2 Press again to enter a selection in OSD. ○ Function If OSD is active, press to select or adjust OSD options. If OSD is 3 UP/ PLUS inactive, press once, then press the buttons marked or to ○ adjust the volume. If OSD is active, press to select or adjust OSD options. If OSD is DOWN / 4 inact
Inhaltszusammenfassung zur Seite Nr. 7
OSD options Please refer to "External Controls" on Page 6. To adjust the OSD settings: 1. Press the MENU button to open the OSD main menu. 2. Use the buttons marked or , to select the menu option you want. 3. Press MENU button to highlight a control, and then press or to adjust the option setting. 4. Press the AUTO button to return to the previous menu option or exit the OSD. OSD Menu Picture Brightness: This adjusts the brightness of the picture on the scr
Inhaltszusammenfassung zur Seite Nr. 8
Audio Volume: Adjusts the volume. Mute : on /off Options Auto Config. : System runs auto-configuration. Wide mode : Wide / Normal Information: This shows brief information on the screen. Reset: Recall to default settings. Settings OSD H. Position OSD V. Position OSD Time-out This changes the position of the OSD window on the screen and staying time. Language: Select the OSD menu language from English, French, German, Italian, Spanish
Inhaltszusammenfassung zur Seite Nr. 9
Troubleshooting Problems Possible Solutions Power LED is not • Check to see if the power switch is in the ON position. ON • Ensure that the Power Cord is connected. No Picture • Check to see if the power switch is in the ON position. • Ensure that the Power Cord is connected. • Ensure the video cable is securely connected to the back of the monitor and the computer. • Move the mouse or press any key on the keyboard to bring the monitor out of "active off" mode. Picture sho
Inhaltszusammenfassung zur Seite Nr. 10
General specifications Item Specification LCD Panel Display 20.1-inch Flat panel active-matrix TFT LCD Max resolution WSXGA+ 1680×1050 pixels Pixel Pitch 0.258 mm Color 16.7M Brightness 300 cd/m² (Typical) Contrast Ratio 600:1 (Typical) Response Time 16ms (Typical) View Angle of Horizontal 89° / 89°(Typical) View Angle of Vertical 89° / 89°(Typical) External Controls Power Button ON/ OFF Control Buttons MENU / / / AUTO OSD Function Contrast / Brightness /Focus /
