Inhaltszusammenfassung zur Seite Nr. 1
!! ! !
SyncMaster 711ND
Install drivers Install programs
Inhaltszusammenfassung zur Seite Nr. 2
Notation Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. This may cause a
Inhaltszusammenfassung zur Seite Nr. 3
Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. This may cause an electric shock or fir
Inhaltszusammenfassung zur Seite Nr. 4
Installation Be sure to contact an authorized Service Center when installing your set in a location with heavy dust, high or low temperatures, high humidity, and chemical substances, or where it will be operated for 24 hours continuously such as an airport, train station or etc. Failure to do so may cause serious damage to your set. Put your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause an electric shock or fire inside the monitor.
Inhaltszusammenfassung zur Seite Nr. 5
Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. Any increase in internal temperature may cause fire. Set down the monitor carefully. The monitor could be damaged or broken. Do not place the monitor face down. The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. Installation by unqualified personnel may result in injury. Always use the mounting device specifie
Inhaltszusammenfassung zur Seite Nr. 6
Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. A dirty connector may cause an electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, t
Inhaltszusammenfassung zur Seite Nr. 7
This may cause an electric shock or fire. Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. This may cause malfunction, an electric shock or fire. Especially avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center. The monitor may malfunction, ca
Inhaltszusammenfassung zur Seite Nr. 8
This may cause an explosion or fire. Never insert anything metallic into the monitor openings. This may cause an electric shock, fire or injury. Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports. It may cause a fire or an electric shock. If an alien substances or water flows into the product, turn the product off, unplug the power connector from the wall outlet and contact S
Inhaltszusammenfassung zur Seite Nr. 9
Failure to disconnect a cable may damage it and lead to fire or an electric shock. Place the product out of children's reach, as they could damage it by hanging onto it. A falling product could cause physical damage even death. When not using the product for an extended time period, keep the product unplugged. Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, leading to electric shock or fire. Do not place children's favorite object
Inhaltszusammenfassung zur Seite Nr. 10
Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recy
Inhaltszusammenfassung zur Seite Nr. 11
Features What is a network monitor? This is a new concept monitor that accesses the PC and LAN services to display images, video clips, documents, etc. by connecting to the host PC. It also has an additional function that remotely connects to the host PC for Internet services, independently of the host PC. MagicNet, which is provided with the product, remotely accesses the network to adjust the time and type of the display contents on each network monitor as well as switching the p
Inhaltszusammenfassung zur Seite Nr. 12
Package Contents Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Monitor Manual User's Guide, Monitor Driver, Warranty Card Natural Color software, Quick Setup Guide (Not available in all MagicTune™ software, locations) MagicRotation software, MagicNet software Cable D-Sub Cable Power Cord LAN Cable Others Remote Control Batteries
Inhaltszusammenfassung zur Seite Nr. 13
Keyboard (USB) Mouse (USB) Your Monitor Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. MagicBright™ button MagicBright™ is a new feature providing optimum viewing [] environment depending on the contents of the image you are watching. Currently six different modes are available : Custom, Text, Internet, Game, Sport and Movie. Each mode has its own pre- configured brightness value. You can easily select one of si
Inhaltszusammenfassung zur Seite Nr. 14
5) Sport For watching motion pictures such as a sport. 6) Movie For watching motion pictures such as a DVD or Video CD. >> Click here to see an animation clip Brightness button [ ] When OSD is not on the screen, push the button to adjust brightness. >> Click here to see an animation clip Adjust buttons [ ] Adjust items in the menu. Enter button [ ] Activates a highlighted menu item. / / SOURCE button Push the 'SOURCE', then selects the video signal while the OSD is off. (When
Inhaltszusammenfassung zur Seite Nr. 15
Cable Fix Ring When connecting the cable is finished, fix the cables to the Cable Fix Ring. Connect USB devices such as a mouse, keyboard and external storage USB devices (e.g. DSC, MP3, external storage, etc.). (USB Connection Terminal) LAN Connect when using it as a monitor. (LAN Connection Terminal) See Connecting Cables for further information regarding cable connections. Remote Control Remote Control The performance of the remote control may be affected by a TV o
Inhaltszusammenfassung zur Seite Nr. 16
Up-Down Left-Right buttons ENTER AUTO LOCK MagicNet Remote Control ON / OFF Use these buttons to turn the monitor on or off. NUM, ENG Used to enter numbers or text in English. SYMBOL : Used to enter symbols. DEL Functions as the backspace. ENTER Activates a highlighted menu item. BRIGHT buttons When OSD is not on the screen, push the button to adjust brightness. PAGE Selection Used to select a page. MagicNet MagicNet Quick Launch Button. PC A shortcut button for analog mode.
Inhaltszusammenfassung zur Seite Nr. 17
Connecting Cables Connect to the host PC using a LAN cable Host PC Hub LAN Cable Monitor Connect the power cord to the power terminal at the back of the monitor. Connect the mouse and the keyboard to the USB ports. Connect the LAN port on the back of the monitor and the hub. Connect the hub and the LAN port of the host PC. The host PC must have an IP address. After connecting the LAN and setting the IP address, you can view the host PC screen on the monitor. Use
Inhaltszusammenfassung zur Seite Nr. 18
Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Using the D-sub (Analog) connector on the video card. - Connect the D-Sub Cable to the VGA IN port on the back of your monitor. [VGA IN] To use the D-Sub (analog) output through another device (monitor, TV, projector, etc.) - Connect the VGA OUT port of the monitor and the D-Sub port of another device using the D-Sub cable. [VGA OUT] Usin
Inhaltszusammenfassung zur Seite Nr. 19
Connect USB devices such as a mouse, keyboard and external USB storage devices (e.g. DSC, MP3, external storage, etc.). (USB Connection Terminal) (You cannot use these devices without connecting to the host PC or switching to the MagicNet.) LAN Connect the LAN cable. (LAN Connection Terminal) D-sub 15-pin port Use it by connecting it to another monitor. [VGA OUT] (The picture of the main monitor is displayed on the connected monitor.) Using a Network Monitor MagicNet Mode
Inhaltszusammenfassung zur Seite Nr. 20
It can execute a file(s) registered with the host PC. And it can also locate and run any external devices connected to other network monitors. When using MagicNet with MagicNet Server Program : execute Network mode. Photo JPEG, BMP file format is supported. Movie AVI, MPEG1/2, DivX 4.x, DivX 5.x file format is supported. OFFICE/HTML PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed. RDP Allows you to connect to the host PC. Operates regardless of t
