Inhaltszusammenfassung zur Seite Nr. 1
SyncMaster 940BWPlus / 942BW
Install drivers Install programs
Inhaltszusammenfassung zur Seite Nr. 2
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. The images here are for referenc
Inhaltszusammenfassung zur Seite Nr. 3
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. (Class l Equipment only.) Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the
Inhaltszusammenfassung zur Seite Nr. 4
Installation Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the
Inhaltszusammenfassung zur Seite Nr. 5
Keep any heating devices away from the power cable. A melted coating may lead to electric shock or fire. Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. Any increase in the internal temperature may cause fire. Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface.The installation of the bracket must be done by a qualified
Inhaltszusammenfassung zur Seite Nr. 6
Do not spray water or detergent directly onto the monitor. This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power ou
Inhaltszusammenfassung zur Seite Nr. 7
unusual sound or smell coming from the monitor - unplug it immediately and contact an authorized dealer or the Service Center. This may cause electric shock or fire. Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. This may cause a malfunction, electric shock or fire. In particular, avoid operating the monitor near water or outdoors where the monitor could be exposed to snow or rain. If the monitor is dropped or the casi
Inhaltszusammenfassung zur Seite Nr. 8
Never insert anything metallic into the monitor openings. This may cause electric shock, fire or injury. Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports or etc. This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center. When viewing a f
Inhaltszusammenfassung zur Seite Nr. 9
A falling product may cause injury to the person or even fatality. When not using the product for an extended period of time, keep the product unplugged. Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to climb on the product to retrieve an object. The product could fall, causing injury or even
Inhaltszusammenfassung zur Seite Nr. 10
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Type 1 Monitor & Simple stand Bottom Type 2 Monitor & Lowest HAS Stand Manual
Inhaltszusammenfassung zur Seite Nr. 11
User's Guide, Warranty Card Monitor Driver, (Not available in all Quick Setup Guide Natural Color software, locations) MagicTune™ software Cable D-sub Cable Power Cord DVI Cable (option) Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. MagicBright™ is a new feature providing optimum viewing MagicBright™ environment depending on the contents of the image you are [] watching. Currently seven different
Inhaltszusammenfassung zur Seite Nr. 12
3) Internet For working with a mixture of images such as text and graphics. 4) Game For watching motion pictures such as a game. 5) Sport For watching motion pictures such as a sport. 6) Movie For watching motion pictures such as a DVD or Video CD. 7) Dynamic Contrast Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast. >>Click here to see an animation clip Brightness button When OSD is not on the screen, push the b
Inhaltszusammenfassung zur Seite Nr. 13
(The configuration at the back of the monitor may vary from product to product.) Connect the power cord for your monitor to the power port on the back POWER port of the monitor. Connect the DVI Cable to the DVI port on the back of your monitor. DVI IN port RGB IN port Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. Kensington Lock The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has
Inhaltszusammenfassung zur Seite Nr. 14
Connecting the Monitor Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use appropriate connection for your computer. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] Using the DVI (Digital) connector on the video card. Connect the DVI Cable to the DVI IN port on the back of your monitor. [
Inhaltszusammenfassung zur Seite Nr. 15
Input devices such as digital DVD are connected to the terminal of the monitor using 1. DVI IN the DVI cable. Then, start the DVD with a DVD disc inserted. 2. 3. Select Digital using the SOURCE button. DVI-HDMI cable 1. The HDMI terminal of digital DVD player is connected to the DVI IN terminal of the monitor using the HDMI-DVI cable. 2. Then, start the DVD with a DVD disc inserted. Select using the button. 3. Digital SOURCE Using the Stand Monitor Assembly
Inhaltszusammenfassung zur Seite Nr. 16
Monitor and Bottom Lowest HAS Stand A. Stand Stopper Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
Inhaltszusammenfassung zur Seite Nr. 17
Simple stand Lowest HAS Stand Monitor Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.
Inhaltszusammenfassung zur Seite Nr. 18
1. Insert CD into the CD-ROM drive. 2. Click "Windows" 3. Choose your monitor model in the model list, then click the button. "OK" 4. If you can see following message window, then click the "Continue Anyway" button. ® ® Then click "OK" button. (Microsoft Windows XP Operating System) This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Samsung Monitor homepage http://www.samsung.com/ 5
Inhaltszusammenfassung zur Seite Nr. 19
3. Click "Personalization" and then "Display Settings". 4. Click "Advanced Settings…". 5. Click " " in the " " tab. If the " " button is deactivated, it Properties Monitor Properties means the configuration for your monitor is completed. The monitor can be used as is. If the message “ ” is displayed, as shown in the figure below, Windows needs… click "Continue". This monitor driver is under certifying MS logo, and this installation doesn't damage your system
Inhaltszusammenfassung zur Seite Nr. 20
7. Check the " " checkbox and click " Browse my computer for driver software Let me ". pick from a list of device drivers on my computer 8. Click "Have Disk…" and select the folder (for example, D:\Drive) where the driver setup file is located, and click " ". OK 9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click " " → " " → " " → " " on the following screens displayed in Close Close OK OK s
