Inhaltszusammenfassung zur Seite Nr. 1
Operation/Reference Guide
MVP-5100/5150
Modero® Viewpoint
Widescreen Touch Panels
Last Updated: 12/2/2008
Mio Modero Touch Panels
Inhaltszusammenfassung zur Seite Nr. 2
AMX Limited Warranty and Disclaimer All products returned to AMX require a Return Material Authorization (RMA) number. The RMA number is obtained from the AMX RMA Department. The RMA number must be clearly marked on the outside of each box. The RMA is valid for a 30-day period. After the 30-day period the RMA will be cancelled. Any shipments received not consistent with the RMA, or after the RMA is cancelled, will be refused. AMX is not responsible for products returned without a valid RMA n
Inhaltszusammenfassung zur Seite Nr. 3
FCC Information This device complies with Part 15 of the FCC Rules and Industry Canada RSS 210, subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. The
Inhaltszusammenfassung zur Seite Nr. 4
Software License and Warranty Agreement • LICENSE GRANT. AMX grants to Licensee the non-exclusive right to use the AMX Software in the manner described in this License. The AMX Software is licensed, not sold. This license does not grant Licensee the right to create derivative works of the AMX Software. The AMX Software consists of generally available programming and development software, product documenta- tion, sample applications, tools and utilities, and miscellaneous technical information.
Inhaltszusammenfassung zur Seite Nr. 5
Table of Contents Table of Contents Introduction ........................................................................................................1 MVP-5150 5.2" Modero ViewPoint WiFi Touch Panel .............................................. 2 MVP-5100 5.2" Modero ViewPoint IR Touch Panel .................................................. 4 Memory .................................................................................................................... 5 Table Charging Station
Inhaltszusammenfassung zur Seite Nr. 6
Table of Contents Automatically setting SSID ............................................................................................ 29 Manually setting SSID.................................................................................................... 29 Configuring multiple wireless touch panels to communicate to a target WAP.............. 32 Step 3: Choose a Master Connection Mode ........................................................... 33 Panel downloads and firmware updates ...
Inhaltszusammenfassung zur Seite Nr. 7
Table of Contents Upgrading Firmware ........................................................................................85 Upgrading the Modero Firmware via the USB port................................................ 85 Step 1: Configure the panel for a USB Connection Type .............................................. 85 Step 2: Prepare Studio for communication via the USB port ........................................ 86 Step 3: Confirm and Upgrade the firmware via the USB port...........
Inhaltszusammenfassung zur Seite Nr. 8
Table of Contents Input mask output examples ....................................................................................... 154 URL Resources ...................................................................................................... 155 Special escape sequences ........................................................................................... 155 Appendix B: Wireless Technology ..................................................................156 Overview of Wireles
Inhaltszusammenfassung zur Seite Nr. 9
Introduction Introduction The MVP-5100 Modero® Viewpoint® IR Touch Panel (FG5966-08) and the MVP-5150 Modero® Viewpoint® WiFi Touch Panel (FG5966-07) are wireless ergonomic devices, with all control established through a NetLinx Master or through an IR receiver. Both utilize a 5.2" Color Active LCD to display a 800 x 480 pixel image with 262,144 colors. The MVP-5150 uses both a pre-installed 802.11g WPA/ WPA2 SDIO wireless card and standard IR communication, and the MVP-5100 uses only IR for
Inhaltszusammenfassung zur Seite Nr. 10
Introduction MVP-5150 5.2" Modero ViewPoint WiFi Touch Panel MVP-5150 Specifications (FG5966-07) Dimensions: 4 3/4" x 7 9/16" x 13/16" (120.7 mm x 191.8 mm x 20.3 mm) Weight: • 1.25 lbs (0.57 kg) Enclosure: Matte black plastic. Power Requirements Panel with battery fully charged: (Without Charging): • Constant current draw: 0.3 A @ 12 VDC • Startup current draw: 0.4 A @ 12 VDC Power Requirements Panel while charging battery: (While Charging): • Constant current draw: 1.1 A @ 12 VDC • Startup cur
Inhaltszusammenfassung zur Seite Nr. 11
Introduction MVP-5150 Specifications (FG5966-07) (Cont.) External Components Connector: 5-pin Mini-USB connector used for output to USB programming, firmware update, and touch panel file transfer between the PC and the target panel. Note: When connecting the panel to PC using a CC-USB (or compatible) cable, be sure to power the panel On before attempting to connect the USB cable from the PC to the mini-USB port on the panel. DC power port: 2.5 mm port to power the panel away from a Charging S
Inhaltszusammenfassung zur Seite Nr. 12
Introduction MVP-5100 5.2" Modero ViewPoint IR Touch Panel The MVP-5100 differs from the MVP-5150 in that it does not have a built-in wireless card or the capacity to install one, and only communicates with other devices via IR. Otherwise, the two devices are identical. MVP-5100 Specifications (FG5966-08) Dimensions: 4 3/4" x 7 9/16" x 13/16" (120.7 mm x 191.8 mm x 20.3 mm) Weight: • 1.25 lbs (0.57 kg) Enclosure: Matte black plastic. Power Requirements Panel with battery fully charged: (Withou
Inhaltszusammenfassung zur Seite Nr. 13
Introduction MVP-5100 Specifications (FG5966-08) (Cont.) External Components (Cont.) DC power port: 2.5 mm port to power the panel away from a Charging Station. Speaker: • 4 Ohm • 2 Watts 300Hz cutoff frequency • NOTE: Speaker is only used for feedback beeps, and will not transmit standard audio. IR Emitters: Transmit IR over 20 feet (6.10 m) from the panel. • IR emitters on G4 panels share the device address number of the panel. • Transmits AMX fixed frequencies at 38KHz and 455KHz and 8 user-
Inhaltszusammenfassung zur Seite Nr. 14
Introduction Transferring firmware KIT files over a direct USB connection should only be done when the panel is connected to a power supply. If battery power fails during a firmware upgrade, the panel flash file system may become corrupted. Basic Operation The MVP-5100 and MVP-5150 are operated using their integral touchscreens. If the device has shut down, a touch of the touchscreen will reactivate it. Each device’s power use allows up to 8 continuous hours of use and up to 96 hours of norma
Inhaltszusammenfassung zur Seite Nr. 15
Accessories Accessories Table Charging Station The MVP-5100 and MVP-5150 may be used with the MVP-TCS-52 Table Charging Station (FG5966- 1X) (FIG. 4), which acts both as a charging station and a direct power connection. The charging station is available in either white (FG5966-10) or black (FG5966-11). FIG. 4 MVP-TCS-52-GB Table Charging Station - Front MVP-TCS-52 Specifications Dimensions (HWD): • 8.0” x 4.75” x 3.5” (20.32cm x 12.07cm x 8.89cm) Weight: • .65 lbs (.29 kg) Rear Connector: • 5-
Inhaltszusammenfassung zur Seite Nr. 16
Accessories Powering the MVP-TCS-52 The MVP-TCS-52 uses a PS3.0 power supply (included with the touch panel or available separately from www.amx.com) to provide direct power for the MVP panel both for standard functions and for charging its internal battery. 1. Connect the terminal end of the PS3.0 power supply to the PWR connector on the bottom of the MVP-TCS-52. 2. To prevent wear on the power supply cord and assure that the device’s base is in full contact with the table surface, press th
Inhaltszusammenfassung zur Seite Nr. 17
Accessories Wall Charging Station The optional MVP-WCS-52 Wall Charging Station (FG5966-1X) offers the same recharging and connection features as the Table Charging Station, with the advantage of being placed within accessible locations where the table station is either inconvenient or impractical (FIG. 6). The Wall Charging Station is available in either white (FG5966-13) or black (FG5966-12). MVP-WCS-52 MVP-5100 Security Release button FIG. 6 MVP-WCS-52-GB Wall Charging Station - Front T
Inhaltszusammenfassung zur Seite Nr. 18
Accessories MVP-WCS-52 Specifications Front Panel • Securing Magnets: Prevent MVP touch panel from falling free during ejection. Components: • Security Latch: Adds the primary layer of security when mounting an MVP touch panel. When the device is inserted, this latch grabs onto the rear of the touch panel and secures it to prevent it from being removed. • Interface Connector Pins: A set of retractable pins (male) that connect to the underside MVP connector strip. This connection provides bot
Inhaltszusammenfassung zur Seite Nr. 19
Accessories Recharging To recharge the touch panel: 1. Slide the device into the Wall Charging Station cradle bottom-first and make sure the device is fully seated in the Charging Station. 2. Press the top of the touch panel back until it clicks. The touch panel is now locked into the Charging Station, and the station will automatically charge the device’s battery. (Please refer to the Battery Settings Page section on page 53 to check on the battery charge status.) 3. To release the touch pa
Inhaltszusammenfassung zur Seite Nr. 20
Accessories Installing the MVP-WCS-52 Since the Wall Charging Station is intended to be affixed to a wall or other permanent structure, care must be taken to ensure its proper installation to prevent potential damage to any touch panel placed within. Other than wall installation tools, the only tool required for this installation is a #1 Phillips screwdriver. Installing the plastic Back Box The plastic back box has two knockouts at the top of the box and four (4) lockdown wings attached to t
