Inhaltszusammenfassung zur Seite Nr. 1
TPC-1261H
GX3 LX800 Touch Panel
Computer with 12.1"
SVGA TFT LCD
User Manual
Inhaltszusammenfassung zur Seite Nr. 2
Copyright The documentation and the software included with this product are copy- righted 2004 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this man- ual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accu
Inhaltszusammenfassung zur Seite Nr. 3
Product Warranty (1 year) Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for one year from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper instal- lation. Advantech assumes no liability under the terms of this warranty as a
Inhaltszusammenfassung zur Seite Nr. 4
CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. FCC Class A This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
Inhaltszusammenfassung zur Seite Nr. 5
Packing List Before setting up the system, check that the items listed below are included and in good condition. If any item does not accord with the table, please contact your dealer immediately. • 1 x TPC-1261H-A1 • 8 x Panel mounting clampers • 8 x Panel mounting screws • 1 x 3-Pin power connector • 1 x TPC x86 Series support CD • 1 x CompactFlash to IDE adapter board Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User's Manual for later reference. 3. Di
Inhaltszusammenfassung zur Seite Nr. 6
13. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel. 14. If one of the following situations arises, get the equipment checked by service personnel: a. The power cord or plug is damaged. b. Liquid has penetrated into the equipment. c. The equipment has been exposed to moisture. d. The equipment does not work well, or you cannot get it to work according to the user's manual. e. The equipment has been dropped and damaged. f. The eq
Inhaltszusammenfassung zur Seite Nr. 7
Contents Chapter 1 General Information ....................................... 2 1.1 Introduction ....................................................................... 2 1.2 Specifications .................................................................... 3 1.2.1 System Kernel ................................................................ 3 1.2.2 I/O Ports ......................................................................... 3 1.2.3 Safety and Environment ..............................
Inhaltszusammenfassung zur Seite Nr. 8
Figure 4.14:Update Driver - 1 ...................................... 25 Figure 4.15:Update Driver - 2 ...................................... 25 Figure 4.16:Update Driver - 3 ...................................... 26 Figure 4.17:Slave Bridge Installation Complete .......... 26 Figure 4.18:PCI-1602 Device Manager ....................... 27 Figure 4.19:PCI Serial port Device Manager .............. 28 Figure 4.20:Update Driver - 1 ...................................... 28 Figure 4.21:Update Driver -
Inhaltszusammenfassung zur Seite Nr. 9
C.2.2 IOCTL _WDT_DISABLE: .......................................... 60 C.2.3 IOCTL_WDT_STROBE: ............................................60 C.2.4 IOCTL_WDT_GETTIMEOUT: .................................. 61 C.2.5 IOCTL_WDT_SETTIMEOUT: ..................................61 C.2.6 IOCTL_WDT_REBOOT: ...........................................61 C.3 Examples ......................................................................... 62 Appendix D Accessory Kit Assembly Procedure............. 66 D.1 Co
Inhaltszusammenfassung zur Seite Nr. 10
Figure F.2:Install Wizard - 1 ....................................... 84 Figure F.3:Install Wizard - 2 ........................................ 85 Figure F.4:Install Wizard - 3 ........................................ 85 F.2 Uninstall the Driver......................................................... 86 Figure F.5:Uninstall -1 ................................................. 86 Figure F.6:Uninstall -2 ................................................. 86 F.3 Touchscreen Calibration ...........
Inhaltszusammenfassung zur Seite Nr. 11
2 1 General Information This chapter gives background infor- mation on TPC-1261H.. Sections include: • Introduction • Specifications • I/O Ports Arrangement • Panel Mounting • Exploded Diagrams • Dimensions & Cutout CHAPTER
Inhaltszusammenfassung zur Seite Nr. 12
Chapter 1 General Information 1.1 Introduction The TPC-1261H touch panel computer is a state-of-the-art HMI (Human Machine Interface). This operator interface with a 12.1” display is an x86-based platform with these key features: • Fanless By using a low-power processor, the system does not have to rely on fans, which often are unreliable and causes dust to circulate inside the equipment. • Bright Display The TFT LCD display suits
Inhaltszusammenfassung zur Seite Nr. 13
1.2 Specifications 1.2.1 System Kernel • CPU: GeodeLink Control Processor LX800 500MHz • BIOS: Award 512KB flash memory • South Bridge: GeodeLink Control Processor CS5535 • VGA: GeodeLink Control Processor LX800 500MHz • Ethernet: Realtek RTL8100BL; IEEE 802.3u protocol compatible • Watchdog Timer: W83627 watchdog timer; 1.6 second timeout period • IDE: 1 EIDE channel supports one CompactFlash socket onboard (Master) and one IDE interface harddrive (Slave) 1.2.2 I/O Ports • 1 parallel
Inhaltszusammenfassung zur Seite Nr. 14
Environment • Operating Temperature: 0 ~ 50° C (32 ~ 122° F) • Storage Temperature: -20 ~ 60° C (-4 ~ 140° F) • Humidity: 40° C @ 10~95% relative humidity (non-condensing) • Vibration: 1 grms (5~500Hz) 1.3 LCD Specifications • Display Type: TFT color LCD • Size (diagonal): 12.1” • Maximum Resolution: 800 x 600 (SVGA) • Maximum Colors: 256,000 • Pixel Pitch (W x H, mm): 0.3075 x 0.3075 • Viewing Angle: 100° • Luminance (cd/m² ): 340 • Contrast Ratio: 300 • Operating Temperature: 0
Inhaltszusammenfassung zur Seite Nr. 15
1.5 Power • Input Voltage: 18 - 32V (the fuse will become an open circuit if the DC input level exceeds 33 V ) DC • Typical: 24V @2.5Amp DC 1.6 I/O Ports Arrangement The arrangement of the I/O ports is shown in Figure 1.1. Figure 1.1: I/O Port Arrangement 1.7 Panel Mounting 1. There is an adhesive waterproof gasket on the Mg-AL front bezel. Make sure the waterproof gasket is in position before installing TPC-1261H into the panel opening. 2. Install the TPC-1261H into the panel opening. 3
Inhaltszusammenfassung zur Seite Nr. 16
Figure 1.2: Panel Mounting 1.8 Dimensions and Cutout • Weight: 4.1 kg (without HDD) • Dimensions: 311 x 237 x 58 mm (W x H x D) • Cutout: 302 x 228 mm (suggested) TPC-1261H User Manual 6
Inhaltszusammenfassung zur Seite Nr. 17
Figure 1.3: Dimensions 7 Chapter 1
Inhaltszusammenfassung zur Seite Nr. 18
TPC-1261H User Manual 8
Inhaltszusammenfassung zur Seite Nr. 19
2 2 System Setup This chapter provides a brief explana- tion for operating TPC-1261H. CHAPTER
Inhaltszusammenfassung zur Seite Nr. 20
Chapter 2 System Setup You can easily get TPC-1261H started by following the below steps. • Step 1: Unpack the TPC-1261H package. Check the packing list at the beginning of this manual to make sure all items have been included. Figure 2.1: Unpack the Package TPC-1261H User Manual 10
