Inhaltszusammenfassung zur Seite Nr. 1
For Custom er Service
Visit Our W ebsite A t
Product Inform ation, Photos,
FAQ’s O wner’s Manuals
ELECTRONICS CORP.
128-6117
Released 11-15-01.
1 of 16
Inhaltszusammenfassung zur Seite Nr. 2
WARNINGS Do not use any solvents or cleaning materials when cleaning the video system. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. Lock the LCD screen in the fully closed position when not in use. Before putting on headphones always adjust the volume setting to the lowest position. Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the
Inhaltszusammenfassung zur Seite Nr. 3
Features Congratulations on your purchase of the Audiovox VOH704 drop-down TV / Video Monitor. The VOH704 7” TFT (Thin Film Transistor) Active Matrix LCD has been designed to give you and your family many (Liquid Crystal Display) Monitor (4:3 and 16:9 years of video entertainment in a mobile environment. Aspect Ratio) Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain OSD (On Screen Display) for Control of Picture the best results f
Inhaltszusammenfassung zur Seite Nr. 4
1 4 5 2 3 6 7 8A 12 9 13 10 11 14 15 16 17 8B 18 -4- 128-6117 4 of 16
Inhaltszusammenfassung zur Seite Nr. 5
Front Panel 10. Recall Button – Used to access and display the 1. Dual Channel Infrared Transmitter – Used to preset radio channels in memory. transmit audio to wireless headphones. 11. Memory Button – Used to store the desired TV/Video Controls channel into memory. 2. Power Button – Bright red when system is On, 12. LCD Display Window – Used to display the FM dim when Off. radio station frequency. 3. Screen Select – Used to select between 4:3 or 13. Search Up/Down – Used to search for the de
Inhaltszusammenfassung zur Seite Nr. 6
REMOTE CONTROL OPERATION 7
6 BATTERY INSTALLATION 1 Before attempting to operate your Remote Control, 2 3 install the batteries as described below. 1) Turn the Remote Control face down. Press down
on the ridged area of the battery cover and slide it 5 4
off. 10 2) Install two “AAA” batteries as shown. Make sure
8 9 that proper polarity (+ or -) is observed.
3) Slide
Inhaltszusammenfassung zur Seite Nr. 7
Remote Controlled TV/Monitor 5. PICTURE SELECT BUTTON Functions Each time this button is pressed, the on screen 1. POWER ON/OFF picture adjustment display cycles through Press this button to turn the VOH704 On. The “adjustment bars” for CONTRAST, channel number or current video source will be BRIGHTNESS, COLOR and TINT. Once the displayed on screen and the picture will appear in a desired adjustment bar is displayed, use the few seconds. Press the button again to turn the VOLUME UP/DOWN butto
Inhaltszusammenfassung zur Seite Nr. 8
8. AUTO MEMORY BUTTON 12. MUTE BUTTON (FOR FM RADIO) When the AUTO MEMORY button is pressed, all Press this button to remove the sound at the channels in TV or CATV mode are searched and headphone station for the FM radio only. Pressing tuned; all the channels with signals detected are the button again restores sound to the previously automatically stored. Please refer to page 2 for set level. more information on TV reception. 13. RECALL BUTTON 9. SKIP/SEARCH BUTTON Press the recall butto
Inhaltszusammenfassung zur Seite Nr. 9
Remote Controlled VCP Functions 22. STOP BUTTON These features can only be used with an Audiovox Press this button to stop the tape. Video Cassette Player, if this option was installed with CHANNEL SET UP your video package. In order to easily access all available TV channels, it may be necessary to perform channel auto- 17. POWER BUTTON programming whenever the vehicle’s geographic This button is used to turn the VCP on and off. location has changed, i.e. city to city, weak signal area. 18. “R
Inhaltszusammenfassung zur Seite Nr. 10
4. To ERASE a channel, press the ERASE/WRITE 6. Pressing the Recall button will scroll through the button on the Remote Control Unit until “MANUAL six presets. MEMORY XX ERASE” is displayed on screen. 7. Pressing the Volume UP or DOWN button in the To STORE a channel, press the button until the remote control unit will set the desired volume MANUAL MEMORY XX ADD is displayed on level in the headphones. screen. 8. Press the Mute button on the remote control unit Note : Please refer to page 2 f
Inhaltszusammenfassung zur Seite Nr. 11
Operation Remote Sensor The VOH704 incorporates an Infrared sensor which Overhead Dome Lights relays signals from the remote control to allow the The lights integrated into the VOH704 are controlled VOH704 and VCP to be controlled simply by pointing by a three position slide switch. Sliding the switch to its remote control at the remote sensor eye. This the on position will turn the lights on. The off position provides control of auxiliary equipment such as an will prevent the lights from t
Inhaltszusammenfassung zur Seite Nr. 12
Controls and Indicators (Fig.1) Accessories 1. INFRARED PICKUP SENSORS – (Receives Wireless Headphones signals from transmitter) The VOH704 includes a built-in infrared transmitter 2. BATTERY COVER and Audiovox wireless headphones (Part Number 3. VOLUME CONTROL IR2CHS-(Two Channel). The volume can be adjusted 4. POWER SWITCH with the control on each headset. The wireless 5. POWER INDICATOR LED headphones must be used within a line of sight from 6. CHANNEL A/B SWITCH the transmitter, as infrared
Inhaltszusammenfassung zur Seite Nr. 13
NOTE: This equipment has been tested and found Battery Installation (Fig.2) to comply with the limits for a Class B digital device, 1. Place two alkaline AAA batteries in the Headphone’s battery compartment making sure pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against that the battery polarity is correct. harmful interference in a residential installation. This 2. Replace the battery cover. equipment generates, uses and radiate radio Fig. 2
Inhaltszusammenfassung zur Seite Nr. 14
on its face. The VOH704 is now ready to play the
audio and video signals from the VCP if it is connected Your video system may be equipped with an RF to the “Video 1” input. Inserting a tape into the VCP modulator, that allows you to listen to the VOH704’s will turn it on and automatically activate the play mode. video audio signal by tuning your vehicle’s radio to If a rewound tape had already been loaded into the the selected frequency, (88.7 or 89.1 - Check with VCP, prior
Inhaltszusammenfassung zur Seite Nr. 15
Replacement Parts Troubleshooting PROBLEM SOLUTION Remote Control 136B2063 Poor TV • Perform auto programming of the tuner. IR Sensor Cover 102B3596 reception Verify antenna condition. • Note: Due to the nature of TV signals, Headphone Jack Cover 102B3597 vehicle motion, direction the vehicle is facing, distance from the transmitter, Specifications nearby surroundings and weather may adversely affect TV reception. These LCD Backlighting Edge Light Tube conditions may result in the following
Inhaltszusammenfassung zur Seite Nr. 16
36 MONTH LIMITED WARRANTY Applies to Audiovox Mobile Video Products AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor. To obtain repa
