Inhaltszusammenfassung zur Seite Nr. 1
LC-5621
56" - quad full HD LCD display
User manual
K5960013-00
Inhaltszusammenfassung zur Seite Nr. 2
Intentionally left blank 2 ________________________________________________________ Barco - LC-5621 - User manual
Inhaltszusammenfassung zur Seite Nr. 3
About the manual 1About the manual 1.1 Contents of the user manual This manual consists of the following chapters: Chapter 1: About the manual Chapter 2: Important notice Chapter 3: Safety precautions Chapter 4: Package and storage Chapter 5: About the product Chapter 6: Installation This chapter describes how the monitor should be installed and connected into the system. It incorporates the pin layout of all the connectors. Chapter 7: Operation This chapter describes the function and the gene
Inhaltszusammenfassung zur Seite Nr. 4
About the manual 1.3 Notation convention Following notations are applicable to this manual and should be respected through the manual. WARNING: Warnings – presented in this manual, provide information, which if not adhered to, may result in personal injury or death. CAUTION: Cautions – presented in this manual, provide information, which if not adhered to, may result in damage to the equipment. NOTE: Notes – presented in this manual, provide information, which emphasize points, significant to u
Inhaltszusammenfassung zur Seite Nr. 5
Important notice 2 Important notice 2.1 Commercial In Confidence The information contained herein is Barco confidential information. No part of the information contained herein may be disclosed outside of the organization of the recipient, its sub-contractors, and customers in any form or by any means and/or stored in a database or retrieval system without the prior written consent of Barco. 2.2 Notice The technical specifications mentioned in this manual shall under no circumstances be used as
Inhaltszusammenfassung zur Seite Nr. 6
Important notice 2.5 Copyright No parts of this book may be reproduced in any form, by print, photo printing, microfilm or any other means without written permission from Barco NV. This manual could include inaccuracies or typographical errors. Manual change supplements are revised as often as necessary to keep manuals as current and accurate as possible. Copyright © Barco NV 6 ________________________________________________________ Barco - LC-5621 - User manual
Inhaltszusammenfassung zur Seite Nr. 7
Safety precautions 3 Safety precautions 3.1 Safety warning WARNING: Electric shock or fire hazard can be caused if critical components are replaced by non- conforming components. These components are marked in this guide by a sign. Replace with conform types only! 3.2 Product safety notice WARNING: Many electrical and mechanical parts in display units have special safety-related characteristics. These characteristics are often not evident from visual inspection nor can the protection afforded b
Inhaltszusammenfassung zur Seite Nr. 8
Package & storage 4 Package & storage 4.1 General A safe transport of the units can only be guaranteed if the original undamaged package is used for shipping. Handle with care when transporting. Keep your original packaging. It is designed for this unit and is the ideal protection during transportation. 4.2 Procedure in case of damaging All shipments should be opened and inspected for concealed damage or pilferage as soon as possible after the arrival at destination. The shipping cartons should
Inhaltszusammenfassung zur Seite Nr. 9
About the product 5 About the product 5.1 Product description 5.1.1 LC-5621 Barco’s LC-5621 display has been specifically designed for us in dedicated professional applications. The display features quad full High Definition (3840x2160) and delivers crisp, clear and color-accurate perfect images on a large display size with 56” diagonal. With the 56” Quad-HD display, operators benefit from a large display surface without having to compromise on image quality or accuracy. The LCD technology used
Inhaltszusammenfassung zur Seite Nr. 10
About the product 5.2 Recommended use 5.2.1 General precautions for all units For optimum performance, please note the following when setting up and using the unit(s). • Allow adequate ventilation in case the configuration is built in a rack or a console, so that the heat can properly dissipate. • Make sure all units are disconnected from mains before connecting the sig- nals. • The power cable or connector (in case of a split design = *connection cable) is the primary means of detaching the s
Inhaltszusammenfassung zur Seite Nr. 11
Installation 6 Installation 6.1 Mounting procedure 6.1.1 LC-5621 mounted on stands The unit is standard mounted on two stands on the rear of the unit. The stands use the VESA mounting holes foreseen in the unit. The stands can be mounted on two ways as shown in the drawing below. USB HUB P C IN DVI-D (Master) RS232 DVI-D (Slave) ON OFF 1 1 USB HUB MAIN POWER AC IN ON DVI-D (Master) RS232 DVI-D (Slave) OFF 1 1 Stand (2x) 1 Figure 1: Location of the stands of the LC-5621 Barco - LC-5621 -
Inhaltszusammenfassung zur Seite Nr. 12
Installation 6.1.2 LC-5621 with VESA compliant mounting solution The LC-5621 can be mounted on an arm compliant to the VESA MIS F, 800, 400, 8 standards. The LC-5621 can also be mounted on a wall or ceiling according to the VESA MIS F, 800, 400, 8 standards. 1 1 1 1 1 1 USB HUB MAIN POWER AC IN DVI-D (Master) RS232 DVI-D (Slave) ON OFF 1 1 VESA mounting holes (8x) 1 Figure 2: Location of the VESA mounting holes 12 _______________________________________________________ Barco - LC-5621 - User ma
Inhaltszusammenfassung zur Seite Nr. 13
Installation 6.2 Connecting the signals 6.2.1 Connector location 5 6 1 2 4 3 1 DVI-D connector (Master) RS-232 connector 2 3 DVI-D connector (Slave) USB Hub 4 Power switch 5 Power connector (AC IN) 6 Figure 3: Connector location LC-5621 Barco - LC-5621 - User manual _______________________________________________________ 13
Inhaltszusammenfassung zur Seite Nr. 14
Installation 6.2.2 Detailed connector information 6.2.2.1 Power connector IEC connector layout POWER 100 - 240 VAC Figure 4: Power connector Power ranging Automatic selection between the following voltage ranges: • 90Vac – 140Vac (100V and 115V nominal) • 180Vac – 264Vac (230V nominal) • Frequency: 45 – 65Hz Mains Fuse inside the unit (T 6.3 A H), for fuse replacement procedures, refer to the maintenance manual of the unit. NOTE: When connecting mains, check if the power source corresponds with
Inhaltszusammenfassung zur Seite Nr. 15
Installation 6.2.2.2 DVI connector DVI-D connector layout DVI-D receptable connector (24 pins), right angle with pegs 1 23 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 DVI input pinning Pin signal 1 TMDS Data 2- 2 TMDS Data 2+ 3 TMDS Data 2/4 Shield 4 TMDS Data 4- 5 TMDS Data 4+ 6 DDC Clock 7 DDC Data 8NC 9 TMDS Data 1- 10 TMDS Data 1+ 11 TMDS Data 1/3 Shield 12 TMDS Data 3- 13 TMDS Data 3+ 14 +5V Power 15 Ground for +5V 16 Hot Plug Detect 17 TMDS Data 0- 18 TMDS Data 0+ 19 TMDS Data
Inhaltszusammenfassung zur Seite Nr. 16
Installation 6.2.2.3 Control connector 9 pins subD male connector layout 15 69 Control pinning Pin signal 1Nc 2 Signal receive 3 Signal transmit 4Nc 5GND 6Nc 7Nc 8Nc 9Nc 16 _______________________________________________________ Barco - LC-5621 - User manual
Inhaltszusammenfassung zur Seite Nr. 17
Installation 6.3 First installation 6.3.1 Case 1: Customer buys NVIDIA Quadro FX 4600 6.3.1.1 System requirements Minimum system requirements for using a NVIDIA Quadro FX 4600: • PC compatible with Intel Pentium® or AMD Opteron® class processor or higher • Open PCI Express x16 lane slot with open adjacent slot • Microsoft Windows XP • 1 GB system memory • 100 MB of available disk space for full installation • CD-ROM or DVD-ROM drive • VGA or DVI-I compatible display • 750 W power supply (higher
Inhaltszusammenfassung zur Seite Nr. 18
Installation 6.3.1.3 Downloading the correct drivers NOTE: Before you install the LC-5621, use an additional LCD monitor to install the drivers to the workstation. First the correct driver should be installed on your system. Go to http://www.nvidia.com Go to download drivers and select the following items Now the following screen should appear: 18 _______________________________________________________ Barco - LC-5621 - User manual
Inhaltszusammenfassung zur Seite Nr. 19
Installation Check the checkbox and push the “Download Now” button. Now the driver should be downloaded on your system. 6.3.1.4 Installing the drivers Install the driver of the NVIDIA Quadro FX 4600 by double clicking the icon on your desktop. Following image appears on the screen: Accept the license agreement and click “Next”. Barco - LC-5621 - User manual _______________________________________________________ 19
Inhaltszusammenfassung zur Seite Nr. 20
Installation Click “Next”. Following screen appears on the screen, click “Next” to install the drivers to your computer. 20 _______________________________________________________ Barco - LC-5621 - User manual
