Inhaltszusammenfassung zur Seite Nr. 1
MultiSync EA232WMi
User’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
Index Warning, Caution .........................................................................................................................English-1 Registration Information ...............................................................................................................English-1 Recommended use ......................................................................................................................English-3 Contents................................................
Inhaltszusammenfassung zur Seite Nr. 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
Inhaltszusammenfassung zur Seite Nr. 4
Canadian Department of Communications Compliance Statement DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1. FCC Information 1. Use the attached specified cables with the MultiSync EA232WMi (L230U1) color monitor so as not to interfere with radio and television reception. (1) The power supply cord you use must
Inhaltszusammenfassung zur Seite Nr. 5
Recommended use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MULTISYNC LCD COLOUR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabine
Inhaltszusammenfassung zur Seite Nr. 6
CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 40 cm and no further away than 70 cm from your eyes. The optimal distance is 50 cm. • Rest
Inhaltszusammenfassung zur Seite Nr. 7
Setup Manual Contents Your new NEC MultiSync LCD monitor box* should contain the following: • MultiSync LCD monitor with tilt/swivel/pivot/height adjust stand • Power Cord • Cable cover • Video Signal Cable (15-pin mini D-SUB male to 15-pin mini D-SUB male) • Video Signal Cable (DVI-D to DVI-D) • USB Cable • Audio Cable • Setup Manual Power Cord Cable cover (Type of power cord included will depend on the where the LCD monitor is to be shipped) Audio Cable USB Cable Setup Manual 15-pin mini D-S
Inhaltszusammenfassung zur Seite Nr. 8
Quick Start To attach the MultiSync LCD monitor to your computer system, follow these instructions: 1. Turn off the power to your computer. 2. For PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws. For PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system (Figure A.2). Tighten all screws. For MAC: Connect the Macintosh cable adapter to
Inhaltszusammenfassung zur Seite Nr. 9
5. To keep the cables neatly organized, place them into the cable management system that is built into the stand. Place the Power cord and DVI cables into the specific hooks, as indicated in Figure C.2/Figure C.3. Place the D-Sub and the USB cables into the specific hooks, as indicated in Figure C.2/Figure C.3. 6. Make sure all cables are resting flat against the stand (Figure C.2/Figure C.3). Please check Tilt, Rise and Lower monitor screen and screen rotation when you manage cables. USB Cable
Inhaltszusammenfassung zur Seite Nr. 10
8. Connect the power cord to the power outlet (Figure E.1). NOTE: Please refer to Caution section of this manual for proper selection of AC power cord. 9. Turn on the monitor with the front power button and the computer (Figure E.1). 10. No-Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup for most timings. For further adjustments, use the following OSD controls: • Auto Adjust Contrast (Analog input only) • Auto Adjust (Analog input only) Refer to the Con
Inhaltszusammenfassung zur Seite Nr. 11
Screen Rotation Before rotating, the screen must be raised to the highest level to avoid running into the desk or pinching your fingers. To raise the screen, with one hand, grip the top of the display by the handle using the other hand to grip the bottom. Lift up to the highest position (Figure RL.1). To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counter- clockwise from Portrait to Landscape (Figure R.1). Figure R.1 Remove Monit
Inhaltszusammenfassung zur Seite Nr. 12
8. Reverse this process to re-attach stand. NOTE: Use only VESA-compatible alternative mounting method. Handle with care when removing stand. NOTE: Match “TOP SIDE” mark on stand to top side of the monitor head when re-attaching stand. “TOP SIDE” mark Hole of “ ” mark Please match top side Please assemble of the monitor then together Flexible Arm Installation This LCD monitor is designed for use with a flexible arm. To mount the monitor to a flexible arm: 1. Follow the instructions on how Remove
Inhaltszusammenfassung zur Seite Nr. 13
Controls OSD (On-Screen Display) control buttons on the front of the monitor function as follows: To access OSD menu, press any of the control buttons (MENU, Left, Right, Down, Up). To change signal input, press the SELECT button. To change ECO MODE, press the RESET/ECO MODE button. NOTE: OSD must be closed in order to change signal input. Button Menu 1 Ambibright Sensor Detects the level of ambient lighting allowing the monitor to make adjustments to various settings resulting in a more comfort
Inhaltszusammenfassung zur Seite Nr. 14
AUTO BRIGHTNESS OFF: No function. (AUTO BRIGHTNESS) 1: Automatically adjusts the brightness to the optimal setting by detecting the brightness 1 level of the environment* . (AUTO BRIGHTNESS) 2: Automatically adjusts the brightness to the optimal brightness setting based on the white display area. The environmental brightness sensor (Ambibright sensor) has no function. (AUTO BRIGHTNESS) 3: Automatically adjusts the brightness to the optimal setting based on the white display area and by using the
Inhaltszusammenfassung zur Seite Nr. 15
Tools VOLUME: Controls the volume of the speakers or headphones. To mute the speaker output, press the “RESET/ECO MODE” button. SOUND INPUT (DisplayPort only): This function selects Audio Input or DisplayPort. VIDEO DETECT: Selects the method of video detection when more than one computer is connected. FIRST: The video input has to be switched to “FIRST” mode. When current video input signal is not present, then the monitor searches for a video signal from the other video input port. If the vide
Inhaltszusammenfassung zur Seite Nr. 16
ECO Information CARBON SAVINGS: Displays the estimated carbon savings information in kg. COST: Displays the electricity cost savings in balance. CARBON CONVERT SETTING: Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting is based on the OECD (2008 Edition). CURRENCY SETTING: Displays electricity pricing in 6 currency units. CURRENCY CONVERT SETTING: Displays electricity savings in kW/hour (US Currency is default). NOTE: This model’s initial setting is “Curr
Inhaltszusammenfassung zur Seite Nr. 17
Specifications Monitor Specifications MultiSync EA232WMi Notes LCD Module Diagonal: 58.4 cm/23.0 inches Active matrix; thin film transistor (TFT) liquid crystal 2 Viewable Image Size: 58.4 cm/23.0 inches display (LCD); 0.265 mm dot pitch; 250 cd/m white Native Resolution (Pixel Count): 1920 x 1080 luminance; 1000:1 contrast ratio, typical (25000:1 contrast ratio, Dynamic). Input Signal DVI: DVI-D 24pin: Digital RGB DVI (HDCP) DisplayPort: DisplayPort Connector: Digital RGB DisplayPort Complies w
Inhaltszusammenfassung zur Seite Nr. 18
Features Thin-frame design creates more desktop space for you to work and play, while the flat screen’s crisp, bright images and crystal- clear text deliver a comfortable viewing experience. No Touch Auto Adjust automatically adjusts your optimal image settings upon initial power-on. Colour Control System: Allow you to change between six colour settings on your display to match your personal preference. Redesigned OSD controls allow you to quickly and easily adjust all elements of your screen im
Inhaltszusammenfassung zur Seite Nr. 19
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The monitor does not support DisplayPort converter signal. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor
Inhaltszusammenfassung zur Seite Nr. 20
Using the Auto Brightness function The brightness of the LCD screen can be set to increase or decrease depending on the amount of ambient light within the room. If the room is bright, the monitor becomes correspondingly bright. If the room is dim, then the monitor will dim accordingly. The purpose of this function is to make the viewing experience more comfortable to the eye in a variety of lighting conditions. The Auto Brightness function is set to 1 by default. SETUP Use the following procedur
