Inhaltszusammenfassung zur Seite Nr. 1
Video Monitor
POWER
ON
OFF
INPUT
STANDBY
SELECT
MENU AUDIO
WV-CM 2080
Color Monitor
Operating Instructions
Model No. WV-CM2080
WV-CM1780
WV-CM1480
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
FRANÇAIS ENGLISH
Inhaltszusammenfassung zur Seite Nr. 2
ENGLISH VERSION CONTENTS PREFACE .................................................................................................................................................... 3 FEATURES .................................................................................................................................................. 3 PRECAUTIONS ........................................................................................................................................... 3 MAJO
Inhaltszusammenfassung zur Seite Nr. 3
PREFACE The Panasonic WV-CM2080, WV-CM1780 and WV-CM1480 The WV-CM2080, WV-CM1780 or WV-CM1480, and other Color Monitor’s high resolution S-video input assures high devices compatible with Panasonic Security Data mode the definition picture quality. bear logo . All monitor functions, except for power and input selection, can be controlled from an onscreen menu. Provided with power saving feature as well as standard BNC and S-video input connectors for connection to CCTV equipment. FEATURES • Ap
Inhaltszusammenfassung zur Seite Nr. 4
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS Front View Rear View FOCUS VIDEO B A AUDIO IN IN B A IN IN STANDBY DATA ON S-VIDEO Video Monitor WV-CM 2080 STANDBY OFF INPUT POWER STANDBY SELECT AUDIO MENU G – + ON PS·Data OFF IN OUT OUT AC IN ON OFF OUT OUT TERMINATION !7 !8 qw e r t u y !1 !3 !4!5 !6 @0!9 @1 !2 * The above figures represent model WV-CM2080. q Power Button (POWER ON/OFF) y Direction Button (C, D) This button turns the power of the monitor on and off. These buttons move the cu
Inhaltszusammenfassung zur Seite Nr. 5
!5 Standby Control Terminal (STANDBY ON/STANDBY OFF/G) This terminal accepts input from an outboard device to control the standby mode. It operates as follows: STANDBY ON: Establishes the specified standby mode. STANDBY OFF: Releases standby mode (normal dis- play). !6 Audio Input Connectors (AUDIO IN A/B) For audio input from an outboard device !7 Audio Output Connectors (AUDIO OUT A/B) The audio input signal connected to the Audio Input Connector is looped through to this connector. !8 S-Video
Inhaltszusammenfassung zur Seite Nr. 6
Video Monitor POWER ON OFF INPU STANDBY SELECT MENU AUDIO WV-CM 1480 1480 Video Monitor POWER ON OFF STANDBY S IN EL PE UC TT MENU AUDIO WV-CM 2080 2080 INSTALLATION The installation described below should be made by qualified service personnel or system installers. Mounting into the Rack for WV-CM2080 The monitor can be mounted into the rack as described below. 1. Place the rack mounting brackets supplied onto the 2. Install the monitor with the rack mounting bracket in the rear of the monito
Inhaltszusammenfassung zur Seite Nr. 7
CONNECTIONS The connections described below should be made by qualified service personnel or system installers. Shown below is an example of a basic system connection. Video Switcher VIDEO FOCUS B A AUDIO IN IN B A STANDBY IN IN DATA ON S-VIDEO STANDBY OFF G AC IN IN OUT OUT OUT OUT ON OFF TERMINATION AUDIO OUT VIDEO OUT VIDEO IN VCR • Monitoring the Playback picture Connection with the Camera Connect the video output of the VCR to the VIDEO IN A or B connector on the monitor with a coaxial c
Inhaltszusammenfassung zur Seite Nr. 8
Connection with the System Controller If the optional 6-conductor cable assembly is used, simply plug one end of the cable into the DATA port of the Monitor and the other end into the DATA port on the System Controller. If you use cables assembled from locally procured materials, it is important that only high quality, data grade cable, suitable for RS-485 communication (shielded 4-wire twisted pair cable), BELDEN 9406 or equivalent, is used. Lower grade cable will result in unstable operation
Inhaltszusammenfassung zur Seite Nr. 9
SETUP PROCEDURES This monitor offers various onscreen menus for setting user Setup Menu preferences. In the COMMUNICATION SETUP Menu, you can set the As shown below, the Setup Menu has seven main sub- parameters for communication between the System menus. Controllers and the Monitors. One of these, CAM CONFIG, is further divided into addi- tional submenus. Displaying the Setup Menu 1. After selecting the Setup Menu on the monitor screen, move the cursor to SETUP DISABLE with the C or D To di
Inhaltszusammenfassung zur Seite Nr. 10
Camera Configuration (CAM CON- Baud Rate (BAUD RATE) FIG) This item lets you set the transmission speed for RS-485 communication. This item lets you set numbers for the input from sys- tem cameras for RS-485 communication. 1. Move the cursor to the BAUD RATE parameter with the C or D button. 1. Move the cursor to CAM CONFIG with the C or D but- ton, then press the - or + button. The CAMERA 2. Select the desired transmission speed shown below CONFIG menu shown below will appear on the monitor
Inhaltszusammenfassung zur Seite Nr. 11
OPERATING PROCEDURES Power Up Display Setting Before operating the monitor, confirm that the cameras and The Display Setting can be made onscreen as shown peripherals are connected correctly and securely. below. 1. Press the MENU button. 1. Turn on the monitor by pressing the POWER button. The menu shown below appears on the monitor screen. The Power Indicator lights in green. It will close automatically if no operation takes place within about 10 seconds. 2. Select the desired input to be d
Inhaltszusammenfassung zur Seite Nr. 12
3. Move the cursor to the BRIGHT, CONTRAST, SHARP- NESS, COLOR, TINT parameter with the C or D but- PAGE1 ton, then adjust the level of the selected item with the BRIGHT -12 - or + button. CONTRAST +8 SHARPNESS -16 While the level of an item is being adjusted, the indica- COLOR -6 tor displays the changed level as shown below. TINT -2 AFC LONG 3.58TRAP ON Item Effect Indicator BRIGHT 0 NORMAL SETTINGS BRIGHT Darker Brighter CONTRAST 0 - or
Inhaltszusammenfassung zur Seite Nr. 13
Audio Volume Control The audio volume can be adjusted with the - or + button in normal view. While the volume is being adjusted, the indicator displays the changed level as shown below. -: Decreases the audio volume. +: Increases audio volume. AUDIO Standby Function 1. Power up the monitor and select the input to be displayed. Refer to Power Up above. 2. Pressing the STANDBY button will toggle the display mode in the sequence shown below. Normal Display STANDBY/MODE1 STANDBY/MODE2
Inhaltszusammenfassung zur Seite Nr. 14
OPERATING PROCEDURES (with the System Controller) For the following procedure, the WV-CM2080, WV-CM1780 or WV-CM1480 needs to be set up first from the Setup menu. The WV-CM2080, WV-CM1780 or WV-CM1480 can be controlled with the specified System Controller. Given below is an example. For further details refer to the Operating Instructions supplied with the System Controller. MONITOR OPERATE LOGIN ALARM UNIT CAMERA BUSY PROHIBITED System Controller WV-CU 360 PROGRAM SETUP CAM SETUP IRIS CLOSE OPEN
Inhaltszusammenfassung zur Seite Nr. 15
APPENDIX This appendix details the elements for communication between the Monitor and the System Controller. For the communication parameter settings, refer to the SETUP PROCEDURES on page 9. Communication Protocol Data Format The controller sends messages to operate the monitor in the format shown below. Code [STX] [ADuuu] [;] [:] [EXT] ASCII (02H) ( ) ( ) ( ) ( ) ( ) (03H) A transmissi
Inhaltszusammenfassung zur Seite Nr. 16
Function Number Table The list below shows the function numbers assigned to the monitor when controlling it with the specified System Controller. Function Number Function 001 NORMAL SETTINGS: Reset the items on the page in the Display Setting menu to the factory default settings. 002 Brightness Control: Reset to value 0 003 Brightness Control: Value Increment (+1) 004 Brightness Control: Value Decrement (–1) 005 Contrast Control: Reset to value 0 006 Contrast Control: Value Increment (+1) 007
Inhaltszusammenfassung zur Seite Nr. 17
SPECIFICATIONS Power Source: 120 V AC, 60 Hz Power Consumption: WV-CM2080: 90 W WV-CM1780: 73 W WV-CM1480: 70 W Screen Size: WV-CM2080: 548 mm (21-9/16”) diagonal tube size 508 mm (20”) viewable size WV-CM1780: 444 mm (17-1/2”) diagonal tube size 406 mm (16”) viewable size WV-CM1480: 394 mm (15-1/2”) diagonal tube size 356 mm (14”) viewable size Horizontal Resolution: WV-CM2080: More than 500 TV lines at center WV-CM1780: More than 800 TV lines at center WV-CM1480: More than 750 TV lines at cent
Inhaltszusammenfassung zur Seite Nr. 18
ACCESSORIES Power Cord ................................................................. 1 pc. Rack Mounting Bracket............................................... 2 pcs. (WV-CM2080) Fixing Screws for Rack Mounting Bracket ................. 8 pcs. (WV-CM2080) 18
Inhaltszusammenfassung zur Seite Nr. 19
Panasonic Security and Digital Imaging Company Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, A Division of Matsushita Electric Corporation of America Ontario, L4W 2T3 Canada (905)624-5010 Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094 Regional Offices: Panasonic Sales Company Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303 Division of Matsushita Electric of Puerto Rico Inc. Southern: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 (770) 338-6
