Inhaltszusammenfassung zur Seite Nr. 1
Plasma Display
PDP-502MXE
Operating Instructions
Inhaltszusammenfassung zur Seite Nr. 2
English If you would like to view a video signal with this unit, please make the necessary connections to the optional video box, PDA-5001.
Inhaltszusammenfassung zur Seite Nr. 3
Basic Operations iv
Inhaltszusammenfassung zur Seite Nr. 4
Safety Precautions IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The exclamation point within an equilateral triangle The lightning flash with arrowhead symbol, within CAUTION: is intended to alert the user to the presence of an equilateral triangle, is intended to alert the user to TO PREVENT THE RISK OF ELECTRIC important operating and maintenance (servicing) the presence of uninsulated “dangerous voltage” SHOCK, DO NOT REMOVE COVER (OR instructions in the literature accompanying the wi
Inhaltszusammenfassung zur Seite Nr. 5
Features Contents ¦ Incorporation of high performance XGA wide Safety Precautions ............................. i plasma panel. Before Proceeding ............................. 2 The XGA wide panel incorporates pioneering developments that have allowed realization of more than 2.5 times the data capacity How to Use This Manual .................................... 2 of the VGA panel used at the TV broadcasting level until now*. Checking supplied accessories .......................... 3 With a defi
Inhaltszusammenfassung zur Seite Nr. 6
Before Proceeding The following example is an actual operation that shows how one might set the vertical position of the screen. The How to Use This Manual screens shown at each step are provided as a visual guide to confirm that the procedure is proceeding as it This manual is set up to follow the course of actions and should. Please familiarize yourself with this process operations in the order that would seem most logical for before continuing on with the rest of this manual. someone setting
Inhaltszusammenfassung zur Seite Nr. 7
STANDBY /ON SCREEN MUTE SIZE DISP CU-V154 VOL VIDEO Y/C RGB 1 RGB 2 MENU SET ë
Before Proceeding 6 Display stand x 2 Checking supplied accessories Check that the following accessories were supplied. 1 Remote control unit 7 Washer (large) x 2 2 AA (R6) batteries x 2 8 Washer (small) x 2 9 Hex hole bolt x 2 3 Cleaning cloth (for wiping front panel) 0 Remote control unit case 4 Speed clamp x 2 Use as a holder for the remote control unit. When attaching to the rear of the main unit, be careful not
Inhaltszusammenfassung zur Seite Nr. 8
Part Names and Functions Main unit Operation panel on the main unit STANDBY/ON 3 Main unit 4 INPUT 5 MENU 6 ADJUST 7 SET 8 SIZE 9 DISPLAY 0 1 2 Note When optional speakers have been connected, the operation panel on the main unit will not be operable. Main unit 6 MENU button Press to open and close the on-screen menu (pages 1 Display stand 13 to 21). 2 Remote control sensor 7 ADJUST (5/°/3/2) buttons Point the remote control toward the remote sensor to Use to navigate menu screens and to adjust
Inhaltszusammenfassung zur Seite Nr. 9
Part Names and Functions Remote control unit 6 STANDBY /ON SCREEN MUTING SIZE 1 7 INPUT VIDEO Y/C VOL 12 8 RGB RGB 2 (BNC) (D-sub) 34 DISPLAY MENU 3 9 4 SET 5 ë
1 STANDBY/ON button 6 SCREEN SIZE button Press to put the unit in operation or standby mode Press to manually select the screen size (page 16). (page 14). 7 MUTING button 2 INPUT buttons Press to mute the volume (page 15). Use to select the input (page 14). 8 VOL (+/–) buttons 3 MENU button Use to adjust the volume (page 15). Press to o
Inhaltszusammenfassung zur Seite Nr. 10
Part Names and Functions Connection panel For details regarding a specific connection format, refer to the page written in parenthesis. 1 2 3 4 5 6 7 8 – + ANALOG OUTPUT SPEAKER IN OUT IN OUT R – L R RS-232C R G B (INPUT 4) (INPUT 3) ANALOG 8 Ω – 16 Ω AUDIO OUTPUT COMBINATION CONTROL INPUT4 ( R G B AUDIO INPUT 1 SPEAKER (R) terminal 6 AUDIO INPUT (Stereo mini jack) For connection of an external right speaker. Use to obtain sound when INPUT4 is selected. Connect a speaker whose impedance
Inhaltszusammenfassung zur Seite Nr. 11
Part Names and Functions 9 0 - = ~ – + 75Ωj2.2kΩ MAIN POWER AC INLET SPEAKER L OFF ON G B R HD VD 8 Ω – 16 Ω [ON SYNC] INPUT3 [H/V SYNC] 9 INPUT3 For connection of a personal computer (page 10). 0 Synchronizing signal impedance selector switch Depending on the connections made at INPUT3, it may be necessary to set this switch to match the output impedance of the personal computer’s synchronization signal. When the output impedance of the personal computer’s synchronization signal is above 75 Ω,
Inhaltszusammenfassung zur Seite Nr. 12
Installation and Connections 4 Set this unit in the stand. Installation of the unit Installation using the supplied display stand Be sure to fix the supplied stand to the installation surface. Use commercially available M8 bolts that are 25 mm longer than the thickness of the installation surface. 1 Fix the supplied stand to the installation surface at each of the 4 prepared holes using commercially available M8 bolts . Front 5 Fix this unit using the supplied washer and bolt. 798 mm Rear 110 mm
Inhaltszusammenfassung zur Seite Nr. 13
Installation and Connections Installation using the optional PIONEER stand or Wall-mount installation of the unit installation bracket This unit has been designed with bolt holes for Ö Please be sure to request installation or mounting of this unit wall-mount installation, etc.. The installation holes that or the installation bracket by an installation specialist or the can be used are shown in the diagram below. (Hole rivets dealer where purchased. can be removed by turning with a screwdriver,
Inhaltszusammenfassung zur Seite Nr. 14
Installation and Connections When connecting to INPUT4 Connection to a personal computer Connection method differs depending on the computer type. When connecting, please thoroughly read the ANALOG OUTPUT computer’s instruction manual. R G B ANALOG INPUT4 ( R G B Before making connections, be sure to make sure that the personal computer’s power and this unit’s main power is off. For the PC input signals and screen sizes that this unit is compatible with, please refer to Supplement 1 (page 26). C
Inhaltszusammenfassung zur Seite Nr. 15
Installation and Connections Audio connections Control cord connection Before making connections, be sure to check that the component’s power and the unit’s main power is off. When control cord connections are made, remote control operation of connected PIONEER components that bear Connecting the speakers the ë logo mark is done through the remote sensor on This unit is equipped with speaker output jacks for this unit. connection to the speaker system (not supplied) specially When the connection
Inhaltszusammenfassung zur Seite Nr. 16
Installation and Connections 1 Organize cables together using the provided speed clamps. Power cord connection Insert 1 into an appropriate hole on the rear of the unit, then snap 2 into the back of 1 to fix the clamp. Connect a power cord after all component connections have been completed. Speed clamps are designed to be difficult to undo once in place. Please attach carefully. PDP-502MXE power cord ratings 2 Cord .......................... Cross-sectional area 3 x 1.0 mm To attach the speed c
Inhaltszusammenfassung zur Seite Nr. 17
Setting Up the System G ON SYNC setup (CLAMP) Setup after connection The RGB video signal is normally composed of 5 signals: After components have been connected to INPUT3 or R, G, B, HD and VD. With G ON SYNC connection, INPUT4, on-screen setup is necessary. however, the signal is composed of 3 signals: R, G (G, HD Follow the procedure described below and make settings and VD combined) and B. as they apply to the type of components connected. If the personal computer being used is a model where
Inhaltszusammenfassung zur Seite Nr. 18
Operations 3 Press the appropriate INPUT button on the remote control unit or INPUT on the main unit to select Selecting an input source the input. On the main unit, input changes each time INPUT is This section explains the basic operation of this unit. pressed as follows. Outlined on the following pages is how to turn the main power on and off, put this unit in the operation or standby 3 INPUT3 mode and how to select connected components. INPUT4 2 Note • Input cannot be changed when a menu sc
Inhaltszusammenfassung zur Seite Nr. 19
Operations To adjust the volume To confirm display settings STANDBY/ON STANDBY /ON SCREEN MUTING INPUT SIZE STANDBY INPUT SCREEN MUTING VIDEO Y/C VOL /ON SIZE 12 MENU VOL +/– INPUT RGB RGB VIDEO Y/C VOL (BNC) (D-sub) 34 12 ADJUST RGB RGB DISPLAY (BNC) (D-sub) MENU 34 DISPLAY MENU DISPLAY SET SET SET SIZE DISPLAY Use VOL + or VOL – to adjust the volume of the DISPLAY connected speakers. INPUT4 To mute the sound FH: 8 4K 4 . HZ 0 FV: 6 . 0 HZ STANDBY /ON SCREEN MUTING SIZE MUTING INPUT VIDEO Y/C V
Inhaltszusammenfassung zur Seite Nr. 20
Operations Moving the screen position Screen size selection upward or downward During personal computer input (1280 x 1024/60Hz only), Changing the screen size when the ZOOM setting is selected, the position of the The size of the picture or the picture’s range projected on screen can be adjusted by using 5/°. the screen can be changed between 4 screen sizes described in the table on this page. Press SCREEN SIZE to select the size. The screen size changes each time SCREEN SIZE on the remote cont
