Inhaltszusammenfassung zur Seite Nr. 1
X9G-NagaV
User’s Manual
Inhaltszusammenfassung zur Seite Nr. 2
FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonab
Inhaltszusammenfassung zur Seite Nr. 3
The Federal Communications Commission warns that changes or modifications of the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE mark for Class B ITE (Following European standard EN55022/1998; EN61000- 3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product. In a domestic environment, this product may cause radio int
Inhaltszusammenfassung zur Seite Nr. 4
TABLE OF CONTENTS TABLE OF CONTENTS ..........................................................................................III Your New LCD Monitor 1 Unpacking 1 Identifying Components 3 Adjusting the Tilting Angle 5 Connecting AC Power and Video Cable 6 Power Management System 6 The LCD Monitor’s Control Panel 7 Adjusting the Monitor’s Display 8 TFT LCD Monitor Specifications 14 Supported Timing 16 Troubleshooti
Inhaltszusammenfassung zur Seite Nr. 5
The LCD Monitor Your New LCD Monitor Your LCD Monitor has been designed to be versatile, ergonomic and user-friendly. The LCD Monitor is capable of displaying most standards, from 640x400 VGA to 1280x1024 SXGA. The digital controls located on the front panel allow the user to easily adjust the Monitor’s display parameters, and the LCD Monitor’s small footprint gives you more room in your workspace for other peripherals. Lightweight and compact, the LCD Monitor is the perfect solution
Inhaltszusammenfassung zur Seite Nr. 6
After unpacking your LCD monitor, make sure the following items are included in the box and are in good condition: • LCD monitor • Power Cord • Monitor-To-PC Analog signal cable 15pin • Monitor-To-PC DVI signal cable • User’s manual If you find that any item to be missing or appear to be damaged, contact your dealer immediately. Do not throw away the packing material or shipping carton in case you need to ship or store the LCD monitor in the future. 2
Inhaltszusammenfassung zur Seite Nr. 7
Identifying Components A. The LCD Monitor — Front View 3 1 4 2 Figure 1-1: The LCD Monitor Front View 1. Power-On Indicator This Circular LED indicator green lit when the power is on and orange lit when the LCD monitor is in power-saving mode. 2. Monitor Stand 3. LCD Screen The LCD monitor screen is a 19-inch TFT 1280 x 1024 screen. 4. LCD Monitor Control Panel Refer to Chapter 2 for more details. 3 Rev.1
Inhaltszusammenfassung zur Seite Nr. 8
B. "Hot Keys" for Quick Adjustment of Monitor Settings + P Figure 1-2: "Hot Keys" 1. Brightness Adjustment "hot key": Brightness Press this + button to allow you to adjust the brightness of the LCD 50 Monitor directly 2. Contrast Adjustment “ Hot key” Contrast Press this - button to allow you to adjust the contrast of the LCD Monitor directly 50 3
Inhaltszusammenfassung zur Seite Nr. 9
Adjusting the Tilting Angle The LCD Monitor’s angle settings range from 0 ° to 10 °. 0 to 10 10 Figure 1-3: Tilting the Monitor 5 Rev.1
Inhaltszusammenfassung zur Seite Nr. 10
Connecting AC Power and Video Cable Note: Turn off your PC and the LCD monitor before connecting your LCD monitor to the computer. AC-IN Monitor AC Outlet Power Cord (Wall Socket) Computer Power Cord DVI VGA Figure 1-4: The AC Adapter Power Management System This LCD Monitor complies with the VESA DPMS power management proposal. When the LCD Monitor is in power-saving mode or detects an incorrect timing, the monitor screen will be blank and the power LED indicator from green l
Inhaltszusammenfassung zur Seite Nr. 11
The Display Controls The LCD Monitor’s Control Panel + P Figure 2-1: The Control Panel 1. : Enable the OSD Menu button or / Move the cursor to the left (when OSD is enabled) 2. : Move the cursor to the Right ( When OSD is enabled) / Auto-adjustment hot key 3. - : Enter into the sub-menu or decrease the value / Contrast hot key 4. + : Enter into the sub-menu or increase the value / Brightness hot key 5. : Power Switch This button lets y
Inhaltszusammenfassung zur Seite Nr. 12
Adjusting the Monitor’s Display OSD Main Menu 1. Pressing the button causes the screen below to appear. 2. Use the & key to select the desired group, then press – or + key to enter into sub-menu 3. Repeat step 2 to select the changed item, then – or + to change the value. Main Menu Sub Menu Description Monitor Control OSD Main SCREEN 8
Inhaltszusammenfassung zur Seite Nr. 13
Monitor Adjustment Allow you to adjust the LCD monitor’s display settings. Press the Adjustment control button to display the submenu. Use the Function Select button to select one of the following submenu options: Auto Adjustment ( For VGA port only, DVI port can’t adjustment ) Press the Adjustment control button to let the monitor determine and select the setting that is most appropriate for your system requirements. H-POSITION: ( For VGA port only, DVI port can’t adjustment ) T
Inhaltszusammenfassung zur Seite Nr. 14
text and graphic display modes. PORT-SELECT: To switch between analog and DVI port for PC signal input EXIT: To exits the Monitor-Control submenu OSD-control The OSD-Control menu lets you adjust the position of the OSD on the screen. Press the Adjustment control button to display the submenu. OSD-H-POSITION: To change the position of the OSD on a horizontal plane. OSD-V-POSITION: To change the position of the OSD on a vertical pla
Inhaltszusammenfassung zur Seite Nr. 15
GRAPHIC-CONTROL: The Graphic-Control option lets you make adjustments that effect the contrast, brightness and color of the LCD monitor’s display. CONTRAST: To adjust the contrast level of the display screen BRIGHTNESS: To adjust the light level on the display screen. COLOR: To select the LCD monitor’s color display. The available options are cold, warm and User. Selecting the user option lets you make individual adjustments to the R, G and B items. COLO
Inhaltszusammenfassung zur Seite Nr. 16
To reset the entire Graphic-Control submenu settings to the factory default. EXIT: To exit the Graphic-Control submenu. MISC-CONTROL: The Misc-Control menu option lets you select the OSD display language, adjust the audio volume setting and view system information. LANGUAGE: The supported languages include German, English, French, Spanish, Italian and Japanese INFORMATION: To indicate display mode timings and firmware version. E
Inhaltszusammenfassung zur Seite Nr. 17
Note: 1) No video No video When the monitor is ON and there is no video signal received, the following message will be displayed 2) Signal out of range When the frequency range of the signal is out of the Monitor’s specifications, (over 85HZ) the display will show the following message Over Range 13 Rev.1
Inhaltszusammenfassung zur Seite Nr. 18
Appendix A TFT LCD Monitor Specifications Item Specification LCD Panel 19" SXGA Control Software Power switch with LED indicator Functions (ON/OFF) Power On-Screen Main Menu Submenu Display MONITOR- Auto Adjustment, H-POSITION, V- (OSD) CONTROL POSITION, PHASE, CLOCK, GRAPHIC/TEXT, PORT-SELECT, RESET, EXIT OSD-CONTROL OSD-H-POSITION, OSD-V- POSITION, OSD-TIMER, EXIT MISC-CONTROL LANGUAGE, INFORMATION, EXIT GRAPHIC- CONTRAST, BRIGHTNESS, COLOR, CONTROL COLOR R, G and B
Inhaltszusammenfassung zur Seite Nr. 19
Item Specificaiton Scanning Frequency 24-80K H/V, Hz 50-75 Power Management Meets VESA DPMS Power Consumption 34W/1W Max. (ON/OFF, W) Dimensions 16.54 x 16.4 x 6.81 in. WxHxD (420.2 x 416.5 x 173mm) Net Weight 11 lbs (approx.) (5 Kg) Power Supply Universal Input AC Socket Environment Operating Temperature: 32 to 104°F (0 to 40° C) Relative Humidity: 10% to 90% Regulatory FCC B DoC,UL/cUL,Energy star 15
Inhaltszusammenfassung zur Seite Nr. 20
Appendix B Supported Timing Vertical Horizontal Item Standards Resolution Dot Clock Scanning Scanning (MHz) Frequency Frequency (Hz) (kHz) 1 NEC PC98 640x400 21.05 56.42 24.83 2 MAC 13" mode 640x480 30.24 66.67 35.00 3 MAC 16" mode 832x624 57.28 74.55 49.73 4 MAC 17" mode 1024x768 80.00 75.02 60.24 5 VGA 640x350 25.18 70.09 31.47 6 VGA 640x400 25.18 70.09 31.47 7 VGA 640x480 25.18 59.94 31.47 8 VESA 640x480 31.50 72.81 37.86 9 VESA 640x480 31.50 75.00 37.50 10 VESA 800x600 3
