Inhaltszusammenfassung zur Seite Nr. 1
1900L 19-inch LCD Touchmonitor User Guide
[Model ET1900L]
Inhaltszusammenfassung zur Seite Nr. 2
Elo TouchSystems 1900L 19-inch LCD Touchmonitor User Guide Revision A P/N E483389 Elo TouchSystems 1-800-ELOTOUCH www.elotouch.com
Inhaltszusammenfassung zur Seite Nr. 3
Copyright © 2008 Tyco Electronics. All Rights Reserved. No part of this publication may be reproduced, transmitted, tran- scribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or other- wise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice. Elo TouchSystems
Inhaltszusammenfassung zur Seite Nr. 4
Table of Contents Chapter 1: Introduction ................................................................. 5 About the Product ............................................................................................................... 5 Precautions .......................................................................................................................... 6 Chapter 2: Installation and Setup ................................................7 Unpacking Y our Touchmonitor ........
Inhaltszusammenfassung zur Seite Nr. 5
C H A P T E R 1 INTRODUCTION About the Product The Elo TouchSystems 1900L touchmonitor senses touch on the display in a completely new way, by recognizing the unique pattern of sounds. Consisting only of a glass overlay mounted in front of the LCD panel, Elo’s 1900L zero-bezel Acoustic Pulse Recognition (APR) delivers benefits that combine the ultimate in optical qualities with a stylish, easy to clean, seamless front face. Wide-aspect displays like the Elo 1900L are easier to use and inco
Inhaltszusammenfassung zur Seite Nr. 6
• VGA and DVI-D video input (DVI-D not available in Europe) • Space-saving built-in speakers • Sealed screen is resistant to water, dust, grease • One-time factory calibration for easy deployment and integration • Pure glass construction provides superior optical performance and the true-flat surface is easy to clean • VESA compliance makes wall or arm-mounting possible For more detailed information, please visit our website: www.elotouch.com. Precautions Follow all warnings, precautions, and ma
Inhaltszusammenfassung zur Seite Nr. 7
C H A P T E R 2 INSTALLATION AND SETUP This chapter discusses how to install and set up your LCD touchmonitor and how to install Elo TouchSystems driver software.
Inhaltszusammenfassung zur Seite Nr. 8
Unpacking Your Touchmonitor Check that the following items are present: Input Audio Touchmonitor Power Cable Cable AND/ OR USB Cable Serial Cable (not available with APR models) AND/ OR VGA Video cable DVI-D Cable TouchTools or APR CD and Quick Install Guide (not available with European models) Elo TouchSystems 1900L User Guide 8
Inhaltszusammenfassung zur Seite Nr. 9
Connecting the Cables to the Touchmonitor and Computer Connector Panel Underneath the Monitor Power DC LED USB Serial DVI-D VGA Audio Audio in Input Output To connect the touchmonitor to the computer: 1 Tilt the monitor to reveal the connector panel in the recessed area underneath the bottom edge of the monitor. 2 Connect the AC power cable to the connector panel and connect the other end to the power outlet. 3 Connect either the USB cable OR the serial cable to the connector panel. Note: Do no
Inhaltszusammenfassung zur Seite Nr. 10
Installing the Touch Driver Your Elo touchmonitor is Plug-and-Play compliant. Information on the video capabilities of the touchmonitor is sent to the video display adapter when the computer’s operating system starts. If the computer’s operating system detects the touchmonitor, follow the instructions on the screen to install a generic Plug-and-Play monitor. Elo TouchSystems provides touchscreen driver software that allows your touchmonitor to work with your computer. Drivers are located on the
Inhaltszusammenfassung zur Seite Nr. 11
Monitor Overview and Dimensions Note: Dimensions are in millimeters. Detailed mechanical drawings can be found at: www.elotouch.com Elo TouchSystems 1900L User Guide 11
Inhaltszusammenfassung zur Seite Nr. 12
Monitor Mounting and Orientation Option 1— Mount on Flat Surface with Stand Landscape Orientation shown above Portrait Orientation shown above Elo TouchSystems 1900L User Guide 12
Inhaltszusammenfassung zur Seite Nr. 13
Monitor Mounting and Orientation (continued) Option 2 — Mount using VESA Rear view of monitor in landscape orientation shown above Rear view of monitor in portrait orientation shown above Elo TouchSystems 1900L User Guide 13
Inhaltszusammenfassung zur Seite Nr. 14
Monitor Mounting and Orientation (continued) Attaching the Stand to a Mounting Surface Option 1 — Mounting from the top. Slide out stand base cover. Use 4 screws to attach stand to surface. Option 2 — Mounting from the bottom. Attach to the surface using the holes shown above. Elo TouchSystems 1900L User Guide 14
Inhaltszusammenfassung zur Seite Nr. 15
C H A P T E R 3 OPERATION About Touchmonitor Adjustments Your touchmonitor probably does not require adjustment. However, variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your video source should be at 1440 X 900 resolution, at 56–76 Hz refresh rate. Operating in other resolutions degrades video performance. For input video outside the refresh rate and dot clock ranges, the monitor does not
Inhaltszusammenfassung zur Seite Nr. 16
On-Screen Display (OSD) Control Panel 1 2 3 4 5 The On-Screen Display (OSD) control panel is located on the side of the monitor, as shown above. OSD Control Buttons The OSD control buttons allow you to change settings on the moni- tor screen. The five buttons shown above are: 1 MENU 2UP 3 DOWN 4 SELECT 5 POWER OSD Menu Functions The control buttons have the following functions: MENU Displays or exits the OSD Menus UP 1) Enters brightness and/or contrast of the OSD (if no OSD is currently di
Inhaltszusammenfassung zur Seite Nr. 17
DOWN 1) Adjusts audio volume or selects Mute option (if no OSD is currently displayed on screen) 2) Decreases value of OSD adjustment choice SELECT 1) Selects Analog or Digital 2) Selects adjustment choices from the OSD menus. POWER Turns the monitor on or off. After adjusting the values, the monitor automatically saves the changes. OSD Lock/Unlock You can lock and unlock the OSD feature. The monitor is shipped with the OSD unlocked, no OSD can be displayed or used. To lock the OSD: 1 Pre
Inhaltszusammenfassung zur Seite Nr. 18
OSD Control Options Auto Adjust • Automatically adjusts video timing parameters (VGA only). Luminance Brightness • Adjusts the brightness. Contrast • Adjusts the contrast. Image Setting (VGA only) H. position • Moves the image left or right on the screen. V. position • Moves the image up or down on the screen. Clock • Stretches the image horizontally. Phase • Adjusts the phase of the dot clock to image data. Color • Sets the color temperature. Audio • Adjusts audio volume or selects Mute option
Inhaltszusammenfassung zur Seite Nr. 19
Recall Color Recall • Restores default color temperature settings. Recall Defaults • Restores original factory settings for H-position, V-position, Clock, and Phase for the current video mode (VGA only). • Restores original factory settings for all other parameters and video inputs, except language. Miscellaneous Aspect Ratio • Selects Fill Screen or Fill to aspect ratio. Sharpness • Adjusts sharpness of video. DDCCI Function • Enables or disables the Display Data Channel Command Interfa
Inhaltszusammenfassung zur Seite Nr. 20
Preset Display Modes The touchmonitor comes with preset settings for commonly used video modes. It automatically adjusts the picture size and centering for any of the video modes listed in Appendix B, 1900L Specifications, under “Preset Display Modes.” Elo TouchSystems 1900L User Guide 20
