Inhaltszusammenfassung zur Seite Nr. 17
Setting Surface Controls 17 LOCKING THE CONTROLS The Cooktop Controls may be locked in order to prevent the cooktop from accidentally being turned ON. This feature can be activated at any time. To Turn ON the Controls Lock Feature: Touch and holf the key pad. After 5 seconds a beep will sound. The Lock Indicator Light above the key pad will turn ON indicating the cooktop is locked. This will keep any Cooking Element or Cooktop functions from being accidentally turned ON. Note: If the cooktop
Inhaltszusammenfassung zur Seite Nr. 18
Inhaltszusammenfassung zur Seite Nr. 19
General Care & Cleaning 19 CARE & CLEANING TABLE How to Clean Surfaces Use hot, soapy water and a cloth. Dry with a clean cloth. Aluminum & Vinyl Using a soft cloth, clean with mild dish detergent and water or a 50/50 solution of Painted and Plastic vinegar and water. Follow by rinsing the area with clean water; dry and polish with Control Knobs a soft cloth. Glass cleaners may be used if sprayed on a soft cloth first. DO NOT spray liquids directly on the control pad and display area. Do not us
Inhaltszusammenfassung zur Seite Nr. 20
Inhaltszusammenfassung zur Seite Nr. 1
Use & Care Guide
Electric Cooktop
Dishwasher
318 200 635 (0606) Rev. A
Inhaltszusammenfassung zur Seite Nr. 2
2 Finding Information MAKE A RECORD FOR FUTURE USE Brand_______________________________________________________________ Purchase Date______________________________________________________ Model Number______________________________________________________ Serial Number______________________________________________________ NO NO NO NO NOTE TE TE TE TE The serial and model numbers may be found on the serial plate located under the cooktop. QUESTIONS? For toll-free telephone support in the U.S. and
Inhaltszusammenfassung zur Seite Nr. 3
Finding Information 3 TABLE OF CONTENTS General Care & Cleaning ............................... 19-21 Finding Information .......................................... 2-3 Care & Cleaning Table........................................... 19 Make a Record for Future use ................................. 2 Cooktop Cleaning and Maintenance ....................... 20 Questions? ............................................................... 2 Cleaning Recommendations for the Safety .....................
Inhaltszusammenfassung zur Seite Nr. 4
Inhaltszusammenfassung zur Seite Nr. 5
Safety 5 CA CA CA CA CAUTION UTION UTION UTION UTION Do not store items of interest to children in the cabinets above the appliance. Children climbing on the cooktop to reach items could be seriously injured. • Do not leave children alone. Children should not be left alone or unattended in the area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance. • DO NOT TOUCH SURFACE UNITS OR AREAS NEAR THESE UNITS. Surface units may be hot even though th
Inhaltszusammenfassung zur Seite Nr. 6
6 Safety • Utensil Handles Should Be Turned Inward and Not Extend Over Adjacent Surface Units. To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil. • Never Leave Surface Units Unattended. Boilovers cause smoking and greasy spillovers that may ignite, or a pan that has boiled dry may melt. • Protective Liners. Do not use aluminum foil to line any part of the appliance. Only use aluminum foil as recommended for baking if used as
Inhaltszusammenfassung zur Seite Nr. 7
Inhaltszusammenfassung zur Seite Nr. 8
Inhaltszusammenfassung zur Seite Nr. 9
Inhaltszusammenfassung zur Seite Nr. 10
10 Setting Surface Controls LOCATIONS OF THE SURFACE RADIANT ELEMENTS Your cooktop is equipped with radiant surface burners with different wattage ratings. The ability to heat food quicker and in larger volumes increases as the element wattage increases. The radiant surface elements are located on the 30” cooktop as follows: -2 small radiant elements located at the right and left rear positions; On/Off On/Off On/Off On/Off POWER -1 dual radiant element located at the right front position; -1 tri
Inhaltszusammenfassung zur Seite Nr. 11
Setting Surface Controls 11 LED MESSAGES OR LIGHT INDICATORS DISPLAYED BY MAIN CONTROL CONTROLS LOCK - This feature allows the cooktop to be locked at anytime. Touch and hold the LOCK key pad for few seconds. If the cooktop is in use it will automati- cally shut off the cooktop to enter in the lock mode. A beep will sound and the Lock indicator light will glow (Fig. 2). Once locked, no other displays will glow and no Cooking Zones will activate. To turn the Controls Lock OFF, touch and hold the
Inhaltszusammenfassung zur Seite Nr. 12
Inhaltszusammenfassung zur Seite Nr. 13
Inhaltszusammenfassung zur Seite Nr. 14
Inhaltszusammenfassung zur Seite Nr. 15
Inhaltszusammenfassung zur Seite Nr. 16
16 Setting Surface Controls KEEP WARM FEATURE The Warm feature may be used with any of the Cooking Elements. To Turn the Keep Warm Feature ON: 1. To select the Keep Warm feature for any Cooking Element touch the key pad for On/Off the corresponding Cooking Element. 2. Touch the key pad located in the main control area. The associate display will show Lh Lh Lh Lh Lh (low heat - Fig. 1) indicating that the Cooking Element is properly set to Keep Fig. 1 Warm. If no other key pads are pressed the
