Inhaltszusammenfassung zur Seite Nr. 1 
                    
                        RC60
 Ceramic Hob
RC60SS
 Ceramic Hob
User Guide
&
Installation & Service Instructions
U109915 - 02                                                                                                                                                                                                                                                                                                                                                                                                                 
                    
                    Inhaltszusammenfassung zur Seite Nr. 2 
                    
                        Contents Before You Start... 1 Hob Overview 3 Cleaning Your Hob 8 Troubleshooting 9 Installation 10 Circuit Diagram 13 Technical Data 14 Warranty/After Sales Service 15                                                                                                                                                                                                                                                                                                                                            
                    
                    Inhaltszusammenfassung zur Seite Nr. 3 
                    
                        DocNo.012-0001 - Introduction - BI hob ceramic 1. Before You Start... Thank you for buying a Rangemaster hob. It should give you  Never operate the hob with wet hands.   many years trouble-free cooking if installed and operated  Never heat unopened food containers. Pressure  correctly. It is important that you read this section before you    build up may make the containers burst and cause  start, particularly if you have not used a ceramic hob before. injury. This appliance is designed for do
                    
                    Inhaltszusammenfassung zur Seite Nr. 4 
                    
                        Hob Care Cleaning Never cook directly on the hob surface. The ceramic surface should be washed after use in order to  prevent it from becoming scratched or dirty. Do not use the hob surface as a cutting board. In the interests of hygiene and safety, the hob should be kept  Do not leave utensils, foodstuffs or combustible items on  clean at all times as a build up in fats and other foodstuffs  the hob when it is not is use (e.g. tea towels, frying pans  could result in a fire. containing oil). Clean
                    
                    Inhaltszusammenfassung zur Seite Nr. 5 
                    
                        DocNo.022-0001 - Overview - RC60 ceramic 2. Hob Overview Fig.2-1 ����� ����� �� �������������� � ���� ����� �� �������������� ArtNo.315-0002 RC60 ceramic hob ����� ����� �� �������������� ����� ����� �� �������������� ELECTRONIC CONTROL  � ������������� ��� ���� �������� The ceramic hob comprises of four cooking zones containing  Fig.2-2 heating elements with different ratings and diameters   (Fig.2-1), each with a residual heat indicator. Each zone is  controlled via the touch sensitive controls
                    
                    Inhaltszusammenfassung zur Seite Nr. 6 
                    
                        Fig.2-5 � � � � � � � 1. Power ON/Power OFF 5. Zone selection indicator � 2. Cooking zone + 6. Timer control  ArtNo.317-0001 60 Touch controls common  3. Cooking zone – 7. Timer display  ELECTRONIC CONTROL  4. Digital display 8. TImer indicator lights (4 off) Always take care before touching the surface, even    when the hob is turned off. It may be hotter than you  think! Residual Heat Indicator, ‘H’ After use, a cooking zone will remain hot for a while as heat  dissipates. When a hot cooking zo
                    
                    Inhaltszusammenfassung zur Seite Nr. 7 
                    
                        To reduce the power to a cooking zone select the required  Fig.2-9 zone, as indicated by the red dot in the display. Press the ‘–‘  key to reduce the power required (Fig.2-8). Note: The ‘–’ key has a repeat function: holding the key  pressed down will reduce the power setting by one level  every 0.3 seconds. To shutdown a cooking zone: ArtNo.317-0004 60 Reducing power  Make sure the required cooking zone has been selected, as  indicated by the red dot in the display. Reduce the power to  0 (Fig.
                    
                    Inhaltszusammenfassung zur Seite Nr. 8 
                    
                        Timer Function Fig.2-15 The timer has two settings: • Zone timer • Minute timer ArtNo.317-0007 60 Setting the zone timer Zone timer This allows each cooking zone to be set to cook up to a  maximum of 99 minutes at a set power level. At the end of  the cooking time the zone will turn off automatically. Activating the timer: Select the required cooking zone and then: 1. Using the ‘+’ and ‘–‘ keys, set the desired cooking  Fig.2-16 temperature.  2. Press the timer key (Fig.2-15): the timer display w
                    
                    Inhaltszusammenfassung zur Seite Nr. 9 
                    
                        Turning off the timer alarm: Fig.2-19 At the end of the cooking time the hob will beep steadily for  2 minutes. Press any key to stop the alarm. Deactivating the timer: ArtNo.317-0007 60 Setting the zone timer Make sure that none of the cooking zones has been selected.  Press the timer and ‘–‘ keys simultaneously. The timer display  will go out. ������������������ ����� ��� ����� ���� Child Lock Function This allows the control panel to be locked to prevent any  accidental use. Fig.2-20 IMPORTANT
                    
                    Inhaltszusammenfassung zur Seite Nr. 10 
                    
                        DocNo.042-0001 - Cleaning - BI hob ceramic 3. Cleaning Your Hob Essential information Cleaning burned-on spills Allow the hob to cool and isolate the electricity supply before Make sure that the residual heat indicators are off and that  carrying out any thorough cleaning. the hob is cool. Remove the excess burned-on substance with  a single-edged razor scraper. Hold the scraper at an angle of  Never use paint solvents, washing soda, caustic cleaners,  about 30° to the surface and then scrape off 
                    
                    Inhaltszusammenfassung zur Seite Nr. 11 
                    
                        DocNo.052-0001 - Troubleshooting ceramic & induction 4. Troubleshooting If there is an installation problem and I don’t get  my original installer to come back to fix it, who  pays? You do. Service organisations will charge for their call- outs if they are correcting work carried out by your  original installer. Therefore, it’s in your own interest to  keep track of this installer so that you can contact them  as required. A crack has appeared in the hob surface. Isolate the hob immediately from 
                    
                    Inhaltszusammenfassung zur Seite Nr. 12 
                    
                        INSTALLATION Check the appliance is electrically safe when you have finished. DocNo.062-0001 - Installation - RC60 hob 5. Installation Dear Installer Location of the Hob Before you start your installation, please complete the details The hob may be installed in a kitchen/kitchen diner but NOT  BELOW. in a room containing a bath or shower. Should your customer have a problem relating to your This appliance is designed for domestic cooking only. Use for  installation they will be able to contact yo
                    
                    Inhaltszusammenfassung zur Seite Nr. 13 
                    
                        INSTALLATION Check the appliance is electrically safe when you have finished. Positioning the Hob Fig.5-1 ��� ��� The hob should be fitted into a work surface, which is at least  600mm deep. In position, it has a maximum thickness of 5mm  from the top of the work surface. The cut-out dimensions are  shown in (Fig.5-1) and the minimum clearances in   ArtNo 314-0006 60cm induction dimensions �� (Fig.5-2). The minimum recommended distances from the  hob to nearby surfaces are shown in (Fig.5-3). ��� 
                    
                    Inhaltszusammenfassung zur Seite Nr. 14 
                    
                        INSTALLATION Check the appliance is electrically safe when you have finished. Electrical Connections Fig.5-5 This appliance must be installed by a qualified electrician  to comply with the relevant Institute of Electrical  Engineers (I.E.E.) regulations and also the local electricity  supply company requirements. WARNING: THIS APPLIANCE MUST BE EARTHED    ArtNo.317-0017 Connection box Note: All external wiring must comply with the IEE  Regulations for the Electrical Equipment of Buildings.  Conne
                    
                    Inhaltszusammenfassung zur Seite Nr. 15 
                    
                        DocNo.091-0001 - Circuit diagram - RG60/RGG60 gas 7. Circuit Diagram N L � ArtNo.080-0015 - RG60/RGG60 circuit diagram � � � � A Spark generator B Ignition switch 13                                                                                                                                                                                                                                                                                                                                               
                    
                    Inhaltszusammenfassung zur Seite Nr. 16 
                    
                        DocNo.102-0001 - Technical data - RC60 7. Technical Data INSTALLER:  Please leave these instructions with the user. DATA BADGE LOCATION:  Base of the hob COUNTRY OF DESTINATION:  GB/IE Dimensions Below worktop: 40mm  Height Above worktop: 5mm (60mm including connection box) Overall width 580mm; see ‘Positioning of the hob’ Overall depth 510mm Space for fixing See ‘Positioning of the hob’ Minimum space above hotplate 650mm Connections Electric 220 – 240V 50Hz Ratings Maximum electric load at 230V 
                    
                    Inhaltszusammenfassung zur Seite Nr. 17 
                    
                        DocNo.111-0001 Warranty 8. Warranty/After Sales Service If consultation or technical assistance is needed, please  provide the local authorised service agent with the purchase  invoice and the product code/serial number. The 2 years free maintenance for the operation of the  appliance started from the date of purchase of this product. Any cosmetic damage to the appliance must be reported  within 90 days of delivery. For in-warranty service please call: 0845 6035312. For general enquiries please 
                    
                    Inhaltszusammenfassung zur Seite Nr. 18 
                    
                        16                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                    
                    Inhaltszusammenfassung zur Seite Nr. 19 
                    
                        17                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                  
                    
                    Inhaltszusammenfassung zur Seite Nr. 20 
                    
                        DocNo.000-0001 - Back cover Rangemaster � � �� � ����������� �������� ������� ������� �� w w w . r a n g e m a s t e r . c o . u k ArtNo.000-0003 CE logo