Inhaltszusammenfassung zur Seite Nr. 1
Table of Contents
1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4
2. COOKTOP MEASUREMENTS ............................................................................................... 6
3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS .................................... 7
3.1 Mounting ..........................................................................................................................................
Inhaltszusammenfassung zur Seite Nr. 2
Important Safety Instruction 1. IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS – Your Safety And the Safety of Others Are Very Important. We have provided many important safety messages throughout this manual and on your appliance. Read all instructions before using your appliance and always obey all safety messages. RECOGNIZE SAFETY INFORMATION This is a safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. UNDERSTAND SIGNAL WORDS
Inhaltszusammenfassung zur Seite Nr. 3
Important Safety Instruction To reduce the risk of fire, electrical shock, injury to persons, or damage when installing the cooktop, some basic precautions must be followed, WARNING including: - Read all instructions - Proper installation is your responsibility. Have a qualified technician install and ground this appliance, in accordance with these installation instructions. - It is the responsibility of the installer to comply with the installation clearances specified on the model/serial I.D
Inhaltszusammenfassung zur Seite Nr. 4
Instructions for the Installer 2. COOKTOP MEASUREMENTS NOTE: Observe all governing codes and ordinances. Some cabinet and building materials are not designed to withstand the heat produced by the cooktop. Check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances. When installing a range under existing cabinets and the instal
Inhaltszusammenfassung zur Seite Nr. 5
Instructions for the Installer 3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS NOTE: The following operation requires building and/or carpentry work and must therefore be carried out by a competent technician. Installation can be carried out on various material, such as masonry, metal, solid wood, plastic laminated wood etc. As long as they are heat resistant (T = 90°C - 194° F). Observe all governing codes and ordinances. Do not obstruct flow or combustion and ventilation air. - It is the
Inhaltszusammenfassung zur Seite Nr. 6
Instructions for the Installer MODEL WITH FRAME Cooktop MINIMUM DISTANCE width A B C D E F G 1 11 11 13 9 2 ” 2 ” 30” 30” 29 / ” 19 / ” 5 / ” / ” - 1 / ” 2 16 16 16 16 758 mm 758 mm 750 mm 500 mm 145 mm 50 mm 50 mm 20 - 40 mm 1 11 11 13 9 2 ” 2 ” 36 ” 36 ” 35 / ” 19 / ” 5 / ” / ” - 1 / ” 8 16 16 16 16 900 mm 900 mm 892 mm 500 mm 145 mm 50 mm 50 mm 20 - 40 mm MODEL WITHOUT FRAME Cooktop MINIMUM DISTANCE width A B C D E F G 3 1 11 13 9 2 ” 2 ” 30 “ 30 “ 28 / ” 19 / ” 5 / ” / ” - 1 / ” 8 16 16 16 1
Inhaltszusammenfassung zur Seite Nr. 7
Instructions for the Installer 3.1 Mounting Before mounting the device to the unit, lay the provided adhesive sponge onto the glass surface to separate it from the unit. After fixing the provided adhesive sponge (B) to the glass, mount the device to the unit using the mounting brackets (A) provided, as shown in the figure. When fixing the cooktop to the cabinet, use only the holes provided, as illustrated here. NOTE: This appliance must not be built-in above a dishwasher. Installation of
Inhaltszusammenfassung zur Seite Nr. 8
Instructions for the Installer 4. ELECTRICAL CONNECTION ELECTRIC SHOCK HAZARD - Disconnect power to the junction box before making connection - Electrically ground the appliance with green or green-yellow colored wire WARNING - Do not ground to a gas pipe - Check with a qualified electricial if you are not sure that the range is grounded - Do not have a fuse in the neutral or ground circuit FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN DEATH, FIRE OR ELECTRICAL SHOCK. Make sure that t
Inhaltszusammenfassung zur Seite Nr. 9
Instructions for the Installer NOTE: Use this method only if local codes allow connecting the cabinet ground conductor to the neutral wire of the power supply cord WARNING ELECTRIC SHOCK HAZARD - Turn power supply off before connecting wires. WARNING - Electrically ground the range. - Failure to follow these instructions can results in death, fire, or electrical shock. - Improper connection of the device-grounding conductor can result in a risk of electric shock. Check with a qualified elect
