Resumen del contenido incluido en la página 1
4-084-259-12 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and
retain it for future reference.
KV-TG21
KV-PG14
L70
© 2001 Sony Corporation
Resumen del contenido incluido en la página 2
b b A Getting Started Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old batteries nor use different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tip • You can also connect your TV to other optional components. (See E) Step 3 Plug in the power cord, then press ! on the TV to turn it on. SELECT Step 4 Press SELECT and PROGR + on the TV at the same time for one to two seconds to preset the channe
Resumen del contenido incluido en la página 3
B WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid that leaks from the batteries touches you, immediately w
Resumen del contenido incluido en la página 4
WARNING (continued) Do not plug in too many appliances to the same Do not place any objects on the TV. power socket. Do not damage the power cord. Pull the power cord out by the plug. Do not pull the power cord itself. Even if your TV is turned Install the TV on a stable TV stand and floor which off, it is still connected to the AC power source can support the TV set weight. Ensure that the TV (mains) as long as the power cord is plugged in. stand surface is flat and its area is larger than t
Resumen del contenido incluido en la página 5
D TV front and rear panels TV rear panel 0 qa qs TV front panel ! SELECT PROGR 9 8 7 6 5 4 321 Button Function 1 ! Turn off or turn on the TV. 2 Remote control sensor. 3 1 Standby indicator. 3 Wake Up indicator. 4 PROGR +/– Select program number. 5 2 +/– * Adjust volume. 6 t Select TV or video input. 7 SELECT Select the desired item. 8 Earphone terminal. 9, qat Video input terminal. 0 8 Antenna input terminal. qs T Monitor output terminal. * You can also use the 2 +/– buttons on the TV to work a
Resumen del contenido incluido en la página 6
E Connecting optional components Connecting to the video input terminal ( t ) TV front panel Audio/Video cable (not supplied) Camcorder TV rear panel Video game equipment Antenna cable (not supplied) Audio/Video cable (not supplied) VCR Note • Do not connect video equipment to t (video input) at the front and the rear of your TV at the same time; otherwise the picture will not be displayed properly on the screen. Connecting to the monitor output terminal (T) TV rear panel Audio/Video cable Audio
Resumen del contenido incluido en la página 7
F Troubleshooting If you find any problem while viewing your TV, please check the following guide. If any problem persists, contact your Sony dealer. Symptom Solutions Snowy picture, • Check the antenna cable and connection on the TV, VCR and on the wall. noisy sound • Preset the channel manually again. (See J) • Check the antenna setup. Contact a Sony dealer for advice. No picture, no sound • Check the power cord, antenna and the VCR connections. • Press ?/1 (power) or ! (main power) to turn
Resumen del contenido incluido en la página 8
G Specifications KV-TG21L70 KV-PG14L70 Note Power requirements 110-240 V AC, 50/60 Hz Power consumption (W) Indicated on the rear of the TV Television system B/G Color system PAL, PAL 60, SECAM, NTSC3.58 (AV IN), NTSC4.43 Channel coverage VHF: E2 to E12 UHF: E21 to E69 CATV: S01 to S03, S1 to S41 8 (Antenna) 75-ohm external terminal Audio output (Speaker) 3W + 3W 3W Number of terminal (Video) Input: 2* Output: 1 Phono jacks; 1 Vp-p, 75 ohms * One input line available (Audio) Input: 2* Output
Resumen del contenido incluido en la página 9
H Remote control See Button Function 0 1 ?/1 Turn off temporarily or – qa 1 turn on the TV. 2a Display the TV program. – qs 2 3 JUMP Jump to previous – qd program number. 1 3 2 – 4 PROGR +/– Select program number. 4 5 6 5 2 +/– Adjust volume. – qf 7 8 9 6 SELECT Select the desired item. – 7 PIC MODE Select picture mode. K - JUMP 0 3 SOUND PROGR 2 9 +/– Adjust items. – MODE 4 – 0 Display on-screen qg information. 5 – qh qa % Mute the sound. – qdt Select TV or video input. qj 6 – qf 0 – 9, ÷ Input
Resumen del contenido incluido en la página 10
I Setting the timers You can turn on and off your TV by using the and buttons respectively. Setting the Wake Up timer \/1 Press until the desired period of time appears 1 on the screen. 1 2 3 WAKE UP TIMER:0H10M 4 5 6 (After 10 minutes) 7 8 9 JUMP - 0 SOUND 2 PROGR MODE WAKE UP TIMER:OFF WAKE UP TIMER:12H00M (No Wake Up timer) (After 12 hours) The Wake Up timer starts immediately after you FAVORITE have set it. Select the program number or video input you 2 TV want to wake up to. Press \/
Resumen del contenido incluido en la página 11
J Presetting channels You can automatically preset up to 100 TV channels in numerical sequence from program number 1, or manually preset desired channels and channels that cannot be preset automatically. Presetting channels automatically from a specified program number 1 2 3 Press SELECT until “AUTO PROGRAM” appears 1 Number 4 5 6 on the screen. buttons 7 8 9 Press + or – once to enter the “AUTO - JUMP 0 2 SOUND PROGR 2 PROGRAM” mode. MODE The on-screen display will start flashing. Press PROGR
Resumen del contenido incluido en la página 12
Presetting channels (continued) To change the color system setting If the color is abnormal when receiving programs through the 8 (antenna input) terminal or the t (video input) terminal (1) Press SELECT until “COLOR SYS” appears on the screen. (2) Press + or – to select the appropriate color system until the color is optimal. AUTO PAL SECAM NTSC3.58 NTSC4.43 To skip program numbers (1) Press PROGR +/– or the number buttons until the unused or unwanted program number appears on the s
Resumen del contenido incluido en la página 13
K Customizing the picture You can customize the picture by selecting the picture mode or by adjusting its settings. Selecting the picture mode Press PIC MODE to select the desired picture mode. Select To 1 2 3 “DYNAMIC” view high contrast pictures. 4 5 6 7 8 9 “STANDARD” view normal contrast pictures. JUMP - 0 SOUND 2 PROGR “SOFT” view mild pictures. MODE SELECT Adjusting the picture setting + or – Press SELECT until the desired setting appears. 1 FAVORITE Each time you press SELECT, the s
