Resumen del contenido incluido en la página 1
DVD7000 User's Manual
DVD Player
DIGITAL
Kodak
PLAYS
Picture CD
MP3
COMPATIBLE
SURROUND
Resumen del contenido incluido en la página 2
Content Introduction Introduction Safety Precautions ....................................................................................................... 2 Important Safety Instructions......................................................................................... 3 Caution ......................................................................................................................... 4 Features ...............................................................................
Resumen del contenido incluido en la página 3
Safety Precautions Introduction CAUTION: THE UNIT EMPLOYS A LASER SYSTEM. TO ENSURE THE PROPER USE OF THE UNIT, READ THIS MANUAL CAREFULLY AND KEEP IT FOR RISK OF ELECTRICAL SHOCK FUTURE REFERENCE. DO NOT OPEN IF THE UNIT REQUIRES SERVICING, CONTACT THE SELLER OR OUR SERVICE CENTRE - SEE "TROUBLE SHOOTING". THE LIGHTNING FLASH WITH AR- ROWHEAD SYMBOL WITHIN AN EQUI- TO PREVENT DIRECT EXPOSURE TO THE LASER LATERAL TRIANGLE IS INTENT TO RADIATION, DO NOT OPEN THE CABINET. VI- ALERT THE USER TO TH
Resumen del contenido incluido en la página 4
Important Safety Instructions Introduction 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpos
Resumen del contenido incluido en la página 5
Caution Introduction For safety, please use the original box and packing materials, and keep the mode of packing same as the original. When you repackage this product. Do not place this product near the volatile liquid such as insecticide. It is normal for the cover and rear panel become warm after the player has been operating for a long time. Do not move this product during playback. Otherwise, it may cause damage to the pick-up and the disc. Press OPEN/CLOSE on the front panel or remote to op
Resumen del contenido incluido en la página 6
Features Introduction Dual Decoding: Dolby Digital AC-3 and DTS Decoding Full compatibility with DVD, SVCD, VCD, CD, MP3, and Kodak picture CD on CD-RW & CD-RW (finalised) Screensaver Multiple playback modes: Memory, Program, Search, 10-Second Review Dynamic spectrum display and 6 frequency bands adjustable 5.1 CH, 2 CH, Optical and Coaxial digital output Composite Video, S-Video and Component (YCbCr) video outputs Disc formats supported by this player: DIGITAL PLAYS Digital Theatre System MP3 f
Resumen del contenido incluido en la página 7
Front panel and Rear panel illustrations Introduction Front panel arrow play/pause open/close power disc tray stop menu echo control previous next fast backward mic jacks fast forward volume control VFD Rear panel down-mix right surround composite right Y main video centre right output C8 s-video sub main CR output woofer left optical surround coaxial output left output down-mix left 6
Resumen del contenido incluido en la página 8
VFD Illustrations Introduction The figure above shows the front panel with all the displays on. Illuminates when a DVD disc is loaded. 1. DVD indicator Illuminates when audio is DTS out. 2. DTS indicator Illuminates VCD when a VCD disc is loaded, SVCD when Super-VCD disc is 3. SVCD-VCD indicator loaded and CD when a CD disc is loaded. Illuminates when audio is DOLBY out. 4. DOLBY indicator Illuminates when the disc has multi-angle function. 5. Multi-angle indicator Illuminates during menu play (
Resumen del contenido incluido en la página 9
Remote Control Introduction 8
Resumen del contenido incluido en la página 10
Connecting to a TV Set Connections Notes: Set player's Analog Out mode to "2 Channel" in the audio setup page. (See page 17) There are three ways of connecting the player's AV output to the TV set. 1. S-video cable and left/right audio cable. (Set the [Video Type] to [CVBS S-Video]) 2. Composite video cable and left/right audio cable. 3. Component video cable and left/right audio cable. (Set the [Video Type] to [CVBS YCbCr]) 9
Resumen del contenido incluido en la página 11
Connecting to an AV amplifier with 2 channel analog audio input Connections Notes: 1. Set player's Analog Out mode to "2 Channel" in the audio set up page (See page 17). 2. Set the TV set's AV input to the channel you have connected. 3. Set the amplifier's audio input to the channel you have connected. 10
Resumen del contenido incluido en la página 12
Connecting to an AV amplifier with 5.1 channel analog audio input Connections Notes: 1. Set player's Analog Out mode to "5.1 Channel" in the audio set up page (See page 17). 2. Set the TV set's AV input to the channel you have connected. 3. Set the amplifier's audio input to the channel you have connected. 11
Resumen del contenido incluido en la página 13
Connecting to an AV amplifier with digital audio input Connections Notes: 1. Set player's Digital Out mode to "PCM" or "Raw" in the audio set up page (See page 18). 2. Set either the Optical or the Coaxial digital audio output. 3. Set the amplifier to the AV input connected to the DVD player. 12
Resumen del contenido incluido en la página 14
Basic Operation Basic Playback Preparation before playing: 1. Connect your DVD player to the TV and amplifier. 2. Turn on the TV. 3. Set the TV to the AV input connected to the DVD Player. 4. Turn down the volume on your amplifier, then power it on. 5. Set the amplifier to the AV input connected to the DVD Player. Step 1 - Press the POWER switch, the player will start. Then "LOAD" is illuminated on the display and the logo is displayed on TV screen. Step 2 - Press OPEN/CLOSE on front panel or re
Resumen del contenido incluido en la página 15
Modes and Features Setup Advanced Features ON SCREEN DISPLAY (OSD)/SETUP 5 In stop mode, press OSD/SETUP, and the TV screen will display the setup menu as the following: A. Press to change the items. B. Press ENTER to display the submenu. C. Press OSD/SETUP to exit the Setup Menu. Setup Menu Language Setup Select [Language] in the Setup Menu, and press ENTER to display the [Language] submenu: Press to select the menu items. A. Press ENTER or to setup. B. Press RETURN or
Resumen del contenido incluido en la página 16
Modes and Features Setup Advanced Features Language Setup 2. Select [DVD Subtitle], and press ENTER or to display the [DVD Subtitle] submenu: A. Press to change your selection. B. Press ENTER to confirm. C. Press OSD/SETUP to exit the Setup Menu. Note: Subtitle languages vary by disc. 3. Select [DVD Audio], and press ENTER or to display the [DVD Audio] submenu: A. Press to change your selection. B. Press ENTER to confirm. C. Press OSD/SETUP to exit the Setup Menu
Resumen del contenido incluido en la página 17
Modes and Features Setup Advanced Features Video Setup Select [Video] in the Setup Menu, and press ENTER to display the [Video] submenu: Press to select the menu item. A. Press ENTER or to setup. B. Press RETURN or to return to the Setup Menu. 1. Select [TV Aspect], and press ENTER or to display the [TV Aspect] submenu: A. Press to change your selection. B. Press ENTER to confirm. C. Press OSD/SETUP to exit the Setup Menu. [4:3 Letter Box] - The full width of t
Resumen del contenido incluido en la página 18
Modes and Features Setup Advanced Features Video Setup 3. Select [Video Type], and press ENTER or to display the [Video Type] submenu: A. Press to change your selection. B. Press ENTER to confirm. C. Press OSD/SETUP to exit the Setup Menu. [CVBS S-Video] ---- S-Video output. [CVBS YCbCr] ---- Component video output. Note: The Composite video output is always available. Audio Setup Select [Audio] in the Setup Menu, and press ENTER to display the [Audio] submenu: Press to
Resumen del contenido incluido en la página 19
Modes and Features Setup Advanced Features Audio Setup 3. Select [Digital Out], and press ENTER or to display the [Digital Out] submenu: A. Press to change your selection. B. Press ENTER to confirm. C. Press OSD/SETUP to exit the Setup Menu. [PCM] --- Digital audio output in PCM (pulse code modulation) format; use for stereo or CD playback. [Raw] --- Digital audio out in original format; use if you connect to an AV receiver with a Dolby Digital or DT
Resumen del contenido incluido en la página 20
Modes and Features Setup Advanced Features Rating Setup Select [Rating] in the Setup Menu, and press ENTER to display the [Rating] submenu: Press to Unlocked select the menu item. A. Press ENTER or to Setup Menu. Note: Not all DVDs support ratings. 1. Use the 0-9 keys to input four digits, then press ENTER to confirm The [Rating] submenu displays as follows: Locked Note: If you forget your password, please use the universal password (listed on the last page of this manua
