Manual de instrucciones de FujiFilm FUJICOLOR SUPERIA AF3-151E

Resumen del contenido incluido en la página 1

AF3-151E
COLOR NEGATIVE FILMS
[ ]
CH
(A)
1. FEATURES AND USES
2. SPEED
[ ]
FUJICOLOR SUPERIA X-TRA 400 CH is a daylight-
Light Source Speed Filter
type ISO 400 color negative film that incorporates 4th
Daylight ISO 400/27° None
Color Layer and the newly developed Super Fine-∑
Tungsten Lamps LBB-12**
(Sigma) Grain Technology to achieve high image qual-
ISO 100/21°*
(3200K) (or Wratten No.80A)
ity when printed on FUJICOLOR papers.
* Indicates the effective speed resulting from designated filter u

Resumen del contenido incluido en la página 2

[ ] FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR SUPERIA X-TRA 400 CH High-Intensity 4. EXPOSURE UNDER VARIOUS LIGHT Fluorescent Discharge CONDITIONS Lamp Type Cool Warm Deluxe Daylight White Clear White White White (D) (W) Mercury Daylight (C.W) (W.W) Mercury Color Even when exposed under morning or evening twilight 10M 30C 40M Compensat- — 10C 10C conditions or when color temperatures are low, no spe- +10Y +30M +40Y ing Filters* cial filter use is needed as color balancing can be

Resumen del contenido incluido en la página 3

FUJICOLOR SUPERIA X-TRA 400 [CH] FUJIFILM PRODUCT INFORMATION BULLETIN • 7. FILM HANDLING 8. FILM STORAGE Unprocessed Film • Expose film before the expiration date indicated on the film package and process as soon as possible • Storing exposed or unexposed film under hot and after exposure. humid conditions may adversely affect speed, color • When loading and unloading roll film, avoid direct balance and physical property changes. Store film sunlight. If there is no shade, turning one

Resumen del contenido incluido en la página 4

[ ] FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR SUPERIA X-TRA 400 CH SUPERIA X-TRA 400 Production Production Type Designation Identification Code Number Edge Stripe Production Latent Image Bar Code (green and red) Identification Code 9-3 Packaging 9-4 Post-Processing Masking Colors The new SUPERIA X-TRA 400 has slight reddish tint in Item comparison with the current SUPERIA X-TRA 400. • Box New Design Identification Color: Blue (unchanged) • Cartridge Design (unchang

Resumen del contenido incluido en la página 5

FUJICOLOR SUPERIA X-TRA 400 [CH] FUJIFILM PRODUCT INFORMATION BULLETIN • 4-2 Processing Solution Control 13. JUDGING EXPOSURE RESULTS Use the current 135-size control strips for processing solution control. SUPERIA X-TRA 400 exposure results can be accurately predicted by using an electronic densitometer equipped 4-3 Processing-Photographic Characteristics with Status M filters. An 18% gray card, receiving the Same as those for SUPERIA 400. same illumination as the subject, when read

Resumen del contenido incluido en la página 6

[ ] FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR SUPERIA X-TRA 400 CH 17. CHARACTERISTIC CURVES 18. SPECTRAL SENSITIVITY CURVES 4.0 Process : CN-16 Exposure : Daylight, 1/125 sec. Densitometry : Status M 3.5Process : CN-16 Density : 1.0 above D-min. Densitometry : Status M 3.0 Green Blue 2.5 Red Sensitive Sensitive Sensitive Layer Layer Layer 2.0 1.5 Cyan Sesitive Layer 1.0 0.5 0.0 400 500 700 600 –4.0 –3.0 –2.0 –1.0 0.0 Exposure [log H (lux-seconds)] Wavelength (nm) * Sensitivity